안녕하세요~ 로이드배관용접학원입니다^^
오늘 포스팅할 내용은 [전주용접교육취업학원] 용접이음부 형상과 명칭에 대해 포스팅해볼껀데요
용접에관심가지시고 공부하시는 분들은 참고하시면서 도움받아보세요~
![](https://t1.daumcdn.net/cfile/cafe/1815BD4D50653B0C32)
![](https://t1.daumcdn.net/cfile/cafe/14784F5050653B4B1C)
① Base metal : Metal to be welded
② Bond line : The junction of the weld metal and the base metal
③ Depth of fusion : The distance that fusion extends into the base metal
④ Face of metal : The exposed surface of a weld on the side from which the welding done
⑤ Leg of a fillet weld : The distance from the root of the joint to the toe of the fillet weld.
⑥ Root of weld : The point or points, as shown in cross-section, at which the bottom of the weld intersections the base metal surface or surfaces.
⑦ Throat of fillet weld : The shortest distance from the root of the fillet weld to its surface
⑧ Toe of a weld : The junction between the face of a weld and the base metal
![](https://t1.daumcdn.net/cfile/cafe/14254D4B50653B6324)
① Bevel angle : The angle formed between the prepared edge of a member and a plane perpendicular to the surface of the member
② Groove angle : The total included angle of the groove between parts to be joined by a groove weld.
③ Groove face : The surface of a member included in the groove
④ Root face : That portion of the groove face adjacent to the root of the joint
⑤ Root opening : The separation between the members to be joined at the root of the joint
![](https://t1.daumcdn.net/cfile/cafe/183B114B50653B7A03)