Professor CV

[박상호]

CURRICULUM VITAE

Name  Sangho PARK

Professor,

Dept. of Mechanical Design Engineering,

CNU (Chungnam National University),

99 Daehak-ro Yuseong-gu Daejeon 305-764 Repulic of Korea

Telephone +82-42-821-6643

Fax +82-42-821-8894

Mobile +82-1022-SANGHO

E-mail spark@cnu.ac.kr

http://www.cnu.ac.kr/~design

EDUCATION

He majors CAD (Computer Aided Design) and got degree of Ph.D. M.S. and B.S. from Seoul National University, Korea at 1988, 1990 and 1995 respectively.

PROFESSIONAL EXPERIENCE

1998-pres. Professor at CNU

2009-pres. Chair at Dept. of Mechanical Design Engineering, CNU

2005-2007 Vice President at Graduate School of Industry, CNU

1995-1998 Senior Research Scientist at ETRI (Electronics and Telecommunications Research Institute), Korea

RESEARCH INTERESTS

CAD/CAE/CAM, Human related Manufacturing using USN and PLM,

Reverse Engineering, 3D Scanning Modeling,

Rapid Prototyping, Human Computer Interaction,

Mechanical Design, Optimal Design

RESEARCH EXPERIENCE

Visiting Scholar at IBM Watson Research Center, Georgia Institute of Technology and Massachusetts Institute of Technology in USA at 1994, 1997 and 2001 respectively.

SELECTED PAPERS PUBLISHED

Analysis of Processing time Between Distributed Geometric Modeling Systems,

Computer Aided Design, UK, ISSN 0010-4485,Vol. 43, No. 2, pp115-121, Feb 2011

Analysis of five- and six-machine micro-factory layouts for micro-pump productivity improvement,

Journal of Mechanical Science and Technology. ISSN 1738-494x. Vol. 24 No.11, pp. 2269-2273, Nov 2010.

Development of a distributed geometric modeling system based on peer to peer,

Journal of Mechanical Science and Technology.ISSN 1738-494x. Vol. 24 No.1, pp. 289-292, Jan 2010.

Efficiency Eval‎uation of Micro Factory for Micro Pump Manufacture,

Journal of Mechanical Science and Technology.ISSN 1738-494x. Vol. 23 No.2, pp. 498-503, Feb 2009.

A method for verification of computer-aided design model errors,

Journal of Engineering Design (Taylor & Francis Group Ltd, ISSN 0954-4828), Volume 16 No 3, pp 337-352, June 2005

Mathematical Modeling of Geometric Tolerance Propagation Considering Effects of Datums,

Sangho Park, Kunwoo Lee, Journal of Engineering Manufacturing (PROCEEDINGS OF THE Institution of Mechanical Engineers), The Institution of Mechanical Engineers, UK,  Vol215 No B9, pp1191-1201, 2001

Verification of Assemblability between Toleranced Parts,

Sangho Park and Kunwoo Lee, Computer Aided Design, UK, Vol. 30, No. 2, pp95-104, July 1998

SELECTED PAPERS PRESENTED

Experiment and Analysis for Bus Passenger Seat Design

PiaoJinghu, Sangho Park, Murali Subramaniyam, TaesuYim

2011 Asian Conference on Design and Digital Engineering (ACDDE 2011), August 27-29, 2011, Huating Hotel, Shanghai, China.

Micro Machine Assembly Analysis, Murali Subramaniyam

Sangho Park, Sung il Choi, and Jong Kweon Park

The 7^th International Workshop on Microfactories, (IWMF 2010), October 24-27, 2010, Daejeon, Korea

Stable Flight Analysis of Ski Jumping its Effects on Lift-to-Drag Ration

Lu Yanan, Sangho Park, S. H. Ko

4^th International Conference on Advanced Computational Engineering and Experimenting (ACE-X2010), July08-09, 2010, Paris, France

 Peer-to-peer Based Geometric Modeling System for Function Sharing

Sung il Choi, Sangho Park, XuXioana

4^th International Conference on Advanced Computational Engineering and Experimenting (ACE-X2010), July08-09, 2010, Paris, France

Economic Analysis of Digital Factory Layouts using Payback Period Method

JinghuPiao, Sangho Park, D. H. Oh

4^th International Conference on Advanced Computational Engineering and Experimenting (ACE-X2010), July08-09, 2010, Paris, France

Measurements of L4/L5 Biomechanical Forces of Korean Adults Postures for Low Back Pain Analysis

Murali Subramaniyam, Sangho Park, Se Jin Park, Yeonju Oh

4^th International Conference on Advanced Computational Engineering and Experimenting (ACE-X2010), July08-09, 2010, Paris, France

Root Cause Analysis of Generator Rotor Endwinding Failure

JinghuPiao, Sangho Park, Hyun-ku Park

Proceeding of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT2010), January 22-24, 2010, Sanya, China

Biomechanical Analysis Comparison of Two Ethnics People in East Asia with Percentile 50

Murali Subramaniyam, Sangho Park, Se Jin Park

ICHCI 2009 (International Conference on Human Computer Interaction), World Academy of Science, Engineering and Technology, World Academy of Science, Engineering and Technology(WASET)

August 26~28, 2009, Singapore

Performance Improvement through Fuel Supply at Re-heat Gas Turbine

Bong-min Kim, Sangho Park, Dongkwan Kim, Joon-sung Kim

ICMAME 2009 (International Conference on Mechanical, Aeronautical and Manufacturing Engineering), World Academy of Science, Engineering and Technology (WASET), August 26~28, 2009, Singapore

Development of Distributed Geometric Modeling System Based on Peer to Peer

Sung il Choi, Sangho Park and Murali Subramaniyam

ICMDT 25~26 June 2009, Jeju Island, Korea

Analysis of Micro Factory Layouts for Productivity Improvement with Five and Six Micro Machines

Murali Subramaniyam, Sangho Park and Jong Kweon Park

ICMDT 25~26 June 2009, Jeju Island, Korea

Visual Reasoning Tutor: Intelligent Tutoring System for Visual Reasoning for Engineers

Eric Wang and Yong Se Kim (Creative Design Institute, Sungkyunkwan University), Murali Subramaniyam and Sangho Park (Chungnam National University), Proceeding of APEEC 2009, The ASME Asia-Pacific Engineering Education Congress, April 09-11, 2009, Taipei, Taiwan, ROC.

Digital Simulation and Efficiency Eval‎uation of Micro Factory to Manufacture a Micro Pump

Murali Subramaniyam,Sangho Park, Sung-ilChoi,JoonYub Song and JoonKweon Park,

IC-ICAME 2008 (IISc Centenary - International Conference on advances in Mechanical Engineering), July, 2-4, 2008

Assemblability Analysis of Micro Milling Machine,

Sung-il CHOI, Sangho PARK, and Murali SUBRAMANIYAM,

ISNIT2007 (International Symposium on Nature-Inspired Technology 2007), October. 11~12, 2007, Daejeon, Korea

An Efficiency Index Proposal for Micro Parts Manufacturing,

Murali Subramaniyam, Sangho Park, Sung-il Choi,JoonYub Song, Chang Woo Lee, and Jong Kweon PARK,

ISNIT2007 (International Symposium on Nature-Inspired Technology 2007),  October. 11~12, 2007, Daejeon, Korea

Simulation of Micro Parts Manufacturing and Assembly by Robot Arm

Seokho JANG, SanghoPARK ,Sung-il CHOI, Murali SUBRAMANIYAM

JoonYub SONG, Chang Woo LEE, Jong Kweon PARK

ISNIT2007 (International Symposium on Nature-Inspired Technology 2007), October. 11~12, 2007, Daejeon, Korea

Development of Machine to Machine Device for u-Manufacturing Technology

Sung-il CHOI, Sangho PARK, Murali SUBRAMANIYAM, Suk-Keun CHA, Joon-Yub SONG, and Han-Gyu KIM

ISNIT2007 (International Symposium on Nature-Inspired Technology 2007), October. 11~12, 2007, Daejeon, Korea

Dancing Motion Generation of Robot by Recognition of Music Beat Information

Sangho PARK, Taejong HAN, Changhwan HYUN, Sung-il CHOI, Murali SUBRAMANIYAM, Doill JUNG, GunWoo KIM and Hye Won SEO

ISNIT2007 (International Symposium on Nature-Inspired Technology 2007), October. 11~12, 2007, Daejeon, Korea

Dancing Motion Generation of a Virtual Human by Recognition of Music Beat Information

Yan WANG, Sangho PARK, Hye Won SEO, GunWoo KIM, Doill JUNG, Sung-il CHOIand Murali SUBRAMANIYAM

ISNIT2007 (International Symposium on Nature-Inspired Technology 2007), October. 11~12, 2007, Daejeon, Korea

Assembly Analysis of Digital Micro Machine,

Sung il Choi*, Sangho Park and Murali Subramaniyam

Proceedings of the 3^rd International Workshop on Microfactory Technology, August 23-24, 2007, Jeju, Korea

Computer Aided Conceptual Design and Modeling of Micro Machines

Sung-il Choi¹Sangho Park, Murali Subramaniyam, Seokho Jang and JoonYub Song

The 3rd Korea-China Joint Conference, Seoul, Korea, 22-24 Aug 007

Introduction to Digital Manufacturing and its application on Micro Assembly

Sangho PARK, Sung-il CHOI, Murali SUBRAMANIYAM, Chang Woo LEE, JoonYub SONG, Seokho JANG

The 1st Mongolia-Korea Joint Workshop on CAD/CAM, 08-10 July 2007, Mongolian National Information Technology Park, Ulaanbaatar, Mongolia

Digital Simulation for Micro Assembly Arranged at Rectangular Pattern in Micro Factory

Sangho PARK, Sung-il CHOI, Murali SUBRAMANIYAM, Seokho JANG, Joon-Yub SONG

ICCSA 26-29 Aug 2007, Kuala Lumpur, Malaysia

Design and modeling of reconfigurable micro assembly machine

(Micro factory digital simulation for micro parts assembly)

Joon-yubSONG ,Sangho PARK, Joo-hyun SEO, Sung-il CHOI, Seokho JANG,

25-29 June 2007 International CAD Conference, Honolulu, Hawai

Assembly Eval‎uation for Micro Factory Design by Digital Model Simulation

Seokho Jang, Sangho Park, Sungil Choi*, Young Sang Jung, JoonYub Song, Chang Woo Lee, Joo Hyun Seo

IWMF 25-27 Oct 2006, 5th International Workshop on Micro-Factories, Besancon, France

A Comparison of the Contact Area after Three Different Osteotomies of the First Metatarsal for Hallux Valgus

Yong-Wook Park, Sangho Park, Pil-Sung Whang, and Hyong-Nyun Kim,

American Orthopaedic Foot & Ankle Society, 22nd Annual Summer Meeting, July 14-16, 2006, Hilton Torrey Pines Hotel, La Jolla, California

Comparison between line and circular type layout of micro factory using digital assembly simulation

Sangho Park, Sungil Choi, Young Sang Jung, Seokho Jang, JoonYub Song, Chang Woo Lee, SooHoon Lee

IWMF2006 (The 2nd International Workshop on Microfactory Technology), Korea Institute of Machinery and Materials, The Korean Society of Machine Tool Engineers, Sponsrored by Korean Ministry of Commerce, Industry and Energy,  6-7 July, 2006, Seogwipo KAL Hotel, Jeju-do, Korea,

Assembly Characteristics Eval‎uation with Micro-factory Digital Simulation

JoonYub Song, Young Sang Jung, Sangho Park, SooHoon Lee, Sung il Choi

The 7th International Conference on Frontiers of Design and Manufacturing, 19-20 June 2006, China

The Design of an Intelligent Assembly System for Micro-Lens Modules of Phone Camera,

Chang-Woo Lee and Sangho Park,

Finnish-Korean Joint Workshop on Miniaturization & M4-Micro-Meso Mechanical Manufacturing, 27 June 2005, Tekes Auditorium (Tampere Univ. of Tech.), Helsinki, Finland

Visualization of Diagonized IGES by Java Native Interface,

Sang-Ho Park, Hyung-Sun Yoon, Byeong-Hoon Lee, Jun-HyoungKeem,

Society of Korea Industrial a Systmes Engineering, October 2002, Kyeongju, Korea

Development of CAD System Over the Internet

Sangho Park and Seong-IL Choi,

Proceedings of The 4th International Joint Symposium Kyushu Univ. & Chungnam National Univ., pp239-242, 21-23 Oct 1999, Kyushu University, Fukuoka, Japan

Geometrical Reasoning for Glue Operation in Non-manifold Modeling,

Sangho Park,

Proceedings of ASME Design Engineering Technical Conferences, pp239-242, 13-16 Sep 1998, Atlanta, Georgia, USA

A Solid Modeler Based on Freedom NURBS Trimmed Surfaces,

Sangho Park, Myung-Soo Kim, GershonElber and Moon-Hyun Kim,

Proceedings of The 7th International Conference on Computing in Civil and Building Engineering (ICCCBE-VII), Volume 1, pp727-732, Aug. 19-21, 1997, Sheraton Walker-Hill Hotel, Seoul, Korea

Mathematical Foundation for Representing Propagation of Geometric Tolerances,

Sangho Park and Kunwoo Lee,

Proceeding of The 4th ACM Symposium on Solid Modeling and Application Sponsored by ACM SIGGRAPH, pp240-247, May. 14-16, 1997, Atlanta, Georgia, USA

Representation of Geometric Tolerances and its Application to Verify Assemblability between Toleranced Parts,

Sanho Park and Kunwoo Lee,

Product Modeling for Computer Integrated Design and Manufacture, Edited by M.J.Pratt, R.D.Sriram and M.J.Wozny, Published by Champman& Hall,

pp 297-307, 1996 and

Proceeding of The 5th IFIP Workshop on Geometric Modeling in CAD, May. 19-23, 1996, Airlie Center, Warrenton, Virginia22186, USA