1) it's system that makes vacuum pressure to remove foreign substance in the patient body and vacuum pressure keeps 0 ~ 740mmHg from air inlet connected in a line through piping.
In lots of use amount at the same time, duplex system operates simutaneously and timer adheres mostly to reduce arrival time to normal pressure.
Feature
* Suitable for the exhaust of gas containing
vapor or moisture
* Conduct the best capaility in low pressure
* High quality performance
* Working smoothly without any noise
* No vibration
Construction
2 - Vacuum Pump
1 - Receiver Tank
1 - Separator Tank
1 - Automatic Water Supply / Drain System
1 - Control Panel
1 - W / Standard Accessories
1) 환자 몸의 이물질을 제거하기 위해 진공 압력을 가하고 진공을 통해 배관으로 연결된 공기 흡입구에서 0 ~ 740mmHg를 유지하는 시스템입니다.
동시에 많은 양의 사용에서 듀플렉스 시스템은 동시에 작동하며 타이머는 대부분 도착 시간을 정상 압력으로 줄이기 위해 준수합니다.
특징
* 증기 또는 수분을 함유 한 가스 배출에 적합
* 저압에서 최고의 기능
수행
* 고품질 성능 * 소음없이 부드럽게 작동
* 진동 없음
구조
2-진공 펌프
1-리시버 탱크
1-분리기 탱크
1-자동 급수 / 배수 시스템
1-제어판
1-W / 표준 액세서리
2) Oil sealed rotary vane vacuum systems are available in a multitude of cofiguratiions Simplex tank mount, Duplex tank mount, as well as Triplex, and Quadruplex stack mount system The system shall include interconnecting piping and wiring and to provide a functional operating package with applicable electrical and plumbing connections at the installation site.
The packaged unit shall be factory assembled, tested, painted and crated prior to shipment.
Normal Operation Vacuum
* Oil Sealed Rotary Vane Pump System
Set at 550 ~ 700mmHg
* Dry Rotary Vane Pump System :
Set at 400 ~ 500mmHg
Stendard Equipments
* WOVP or WVS series Rotary Vane Pump(s)
* Tank receiver
* Electrical control panel
* Integral Piping and Wirings
* Vacuum gage and Vacuum Control switch
* Inlet air filter, Manual drain valve,
* Check valve & Pump isolation valve
* Three way solenoid valve (Optional)
2) 오일 밀폐형 로터리 베인 진공 시스템은 다양한 코피 규 라티 온으로 제공됩니다. Simplex 탱크 마운트, Duplex 탱크 마운트, Triplex 및 Quadruplex 스택 마운트 시스템이 시스템은 배관 및 배선을 상호 연결하고 적용 가능한 전기 및 설치 현장의 배관 연결.
포장 된 장치는 선적 전에 공장 조립, 테스트, 도장 및 포장해야합니다.
정상 작동 진공
* 오일 밀폐형 로터리 베인 펌프 시스템
550 ~ 700mmHg로 설정
* 건식 로터리 베인 펌프 시스템 :
400 ~ 500mmHg
스텐다드 장비로 설정
* WOVP 또는 WVS 시리즈 로터리 베인 펌프
* 탱크 리시버
* 전기 제어 패널
* 일체형 배관 및 배선
* 진공 게이지 및 진공 제어 스위치
* 흡입구 공기 필터, 수동 배출 밸브,
* 체크 밸브 및 펌프 차단 밸브
* 3 방향 솔레노이드 밸브 (옵션)