|
아래의 것들은 발명원리입니다...
39모수들로 부터 매트릭스 표를 이용해서..나온.. 숫자들이 발명원리들의 숫자라 했죠?^^
그 숫자에 해당되는 것을 찾아 봅시다...
---------------
ex
-------------
나빠지는 특성에서 10번,, 힘.., 좋아지는 특성의 1번.. 움직이는 물체의 무게...를 찾았습니다..
메트릭스에서 보면.. 8, 10, 18, 37이라는 숫자가 있죠?
이 숫자들은 아래의 발명원리에 해당되는 숫자입니다..
8번이 가장 많이 쓰이는 원리라는 말이죠.^^ tip은 추후 또 올리겠습니다..
-----------
모든 발명문제, 즉 모순을 포함하고 있는 문제의 이면에는 이 모순을 해결할 수 있는 발명 원리들이 있다. Altschuller와 그의 동료들은 전세계의 특허들을 조사하면서 모순을 해결할 수 있는 40가지의 발명 원리들을 도출해냈다.
Principle 1. Segmentation (분할)
A.물체를 독립적인 여러개의 부분으로 분리한다.
Replace mainframe computer by personal computers.
Replace a large truck by a truck and trailer.
Use a work breakdown structure for a large project.
B.물체를 분해하기 쉽도록 만든다.(Section으로 구분)
Modular furniture Quick disconnect joints in plumbing
C.물체의 분할(Fragmentation or Segmentation) 정도/수준을 증가시킨다.
Replace solid shades with Venetian blinds.
Use powdered welding metal instead of foil or rod to get better penetration of the joint.
Principle 2. Taking out / Extraction (추출)
A.물체로 부터 간섭되는 부분이나 특성은 분리/격리시킨다.
B.필요한 부분이나 특성만 추출한다.
Locate a noisy compressor outside the building where compressed air is used.
Use fiber optics or a light pipe to separate the hot light source from the location where light is needed.
Use the sound of a barking dog, without the dog, as a burglar alarm.
Principle 3. Local Quality(국부적인 품질)
A.동질(Homogeneous/Uniform)구조의 물체나 외부환경/작용을 이질 (Heterogeneous / Non-Uniform) 구조로 전이/변경시킨다.
Use a temperature, density, or pressure gradient instead of constant temperature, density or pressure.
B.물체의 각 부품/부분은 각각의 기능/작용에 가장 적합하도록 하는 조건으로 만든다/위치시킨다.
Lunch box with special compartments for hot and cold solid foods and for liquids
C.물체의 각 부분/부품은 서로다른 순기능을 수행하도록 만든다. (1부품은 서로다른 1기능을 수행하도록 만든다)
Pencil with eraser Hammer with nail puller Multi-function tool that scales fish, acts as a pliers, a wire stripper, a flat-blade screwdriver, a Phillips screwdriver, manicure set.
Principle 4. Asymmetry (비대칭성)
A.물체의 형상을 대칭에서 비대칭으로 바꾼다.
Asymmetrical mixing vessels or asymmetrical vanes in symmetrical vessels improve mixing (cement trucks, cake mixers, blenders).
Put a flat spot on a cylindrical shaft to attach a knob securely.B.물체가 비대칭 형상이라면 비대칭의 정도를 증가시킨다.
Change from circular O-rings to oval cross-section to specialized shapes to improve sealing.
Use astigmatic optics to merge colors.
Principle 5. Merging (병합/결합)
A.동일하거나 유사한 물체들을 모아서 동일하거나 유사한 부분/부품별로 조립/조합해서, 병렬 처리/작업한다.
Personal computers in a network Thousands of microprocessors in a parallel processor computer Vanes in a ventilation system Electronic chips mounted on both sides of a circuit board or subassembly
B.시간적으로 결합하여 작업/처리를 인접시켜 연속적으로 수행하거나 동시에 수행한다.
Link slats together in Venetian or vertical blinds.
Medical diagnostic instruments that analyze multiple blood parameters simultaneously Mulching lawnmower
Principle 6. Universality (공용성)
A.하나의 Part나 물체가 Multiple Functions을 수행하게 만든어서 다른 부분/부품의 필요성을 제거한다.
Handle of a toothbrush contains toothpaste
Child's car safety seat converts to a stroller
Mulching lawnmower (Yes, it demonstrates both Principles 5 and 6, Merging and Universality.)
Team leader acts as recorder and timekeeper.
CCD (Charge coupled device) with micro-lenses formed on the surface
Principle 7. Nesting (중첩)
A.물체의 내부에 다른 물체를 넣고 그 물체 내부에 또다른 물체를 넣는다.
Measuring cups or spoons
Russian dolls
Portable audio system (microphone fits inside transmitter, which fits inside amplifier case)B.하나의 물체 또는 그 물체의 일부분을 다른 물체의 사용하지 않는 장소에 넣거나 통과시킨다.
Extending radio antenna
Extending pointer
Zoom lens
Seat belt retraction mechanism Retractable aircraft landing gear stow inside the fuselage (also demonstrates Principle 15, Dynamism).
Principle 8. Anti-weight / Counterweight (반작용)
A.물체의 무게를 보상하기 위해서 들어올리는 기능을 제공하는 다른 물체와 결합/병합한다.
Inject foaming agent into a bundle of logs, to make it float better.
Use helium balloon to support advertising signs.B.물체의 무게를 보상하기 위해서 물체를 기체동력(Aerodynamic), 유체동력(Hydrodynamic), 부력 등이 제공되는 환경과 상호작용하게 한다.
Aircraft wing shape reduces air density above the wing, increases density below wing, to create lift.
Vortex strips improve lift of aircraft wings.
Hydrofoils lift ship out of the water to reduce drag.
Principle 9. Preliminary Anti-Action (사전/예비 반작용)
A.순기능과 역기능을 동시에 수행하는 작용이 필요하면, 역기능을 콘트롤하기 위해 이 작용을 역작용으로 대체한다.
Buffer a solution to prevent harm from extremes of pH.
B.후일 작동시 발생할 바람직하지 않은 압박(Stress)에 저항하도록 물체에 사전 압박을 가한다.
Pre-stress rebar before pouring concrete.
Masking anything before harmful exposure: Use a lead apron on parts of the body not being exposed to X-rays.
Use masking tape to protect the part of an object not being painted
Principle 10. Preliminary Action (사전 작용)
A.물체에 요구되는 작용의 전부 또는 일부를 필요시점 이전에 수행한다.
Pre-pasted wall paper
Sterilize all instruments needed for a surgical procedure on a sealed tray.B.작용/사용되기 이전에 물체를 편리한 장소에 정렬하여 시간의 손실이 없도록 한다.
Pre-arrange objects such that they can come into action from the most convenient place and without losing time for their delivery.
Kanban arrangements in a Just-In-Time factory
Flexible manufacturing cell
Principle 11. Beforehand Cushioning (사전 완충)
A.상대적으로 신뢰도가 낮은 물체에 대해서 사전에 비상사태를 예방하는 조치를 취한다.
Magnetic strip on photographic film that directs the developer to compensate for poor exposure
Back-up parachute
Alternate air system for aircraft instruments
Principle 12. Equipotentiality (등전위, 평형)
A.동작조건을 변경해서 물체를 상승하거나 하강시킬 필요가 없도록 한다.
Spring loaded parts delivery system in a factory
Locks in a channel between 2 bodies of water (Panama Canal)
'Skillets' in an automobile plant that bring all tools to the right position
Principle 13. The Other Way Round / Inversion (역변환, 반전)
A.사용중인 작용과 반대의 작용을 취한다. (냉각 대신에 가열)
To loosen stuck parts, cool the inner part instead of heating the outer part.
Bring the mountain to Mohammed, instead of bringing Mohammed to the mountain.B.움직이는 부분 또는 외부 환경은 고정시키고 고정된 부분을 움직여라.
Rotate the part instead of the tool.
Moving sidewalk with standing people
Treadmill (for walking or running in place)C.물체나 Process를 뒤집는다.
Turn an assembly upside down to insert fasteners (especially screws).
Empty grain from containers (ship or railroad) by inverting them.
Principle 14. Spheroidality - Curvature (원형, 구형, 곡률의 활용)
A.선형의 부분이나 평면을 곡선이나 곡면으로 변경하고 입방형(Cubic) 물체는 구형으로 변경한다.
Use arches and domes for strength in architecture.
B.Rollers, Balls, 나선(Spirals), 반구형(Domes)으로 변경하거나 사용한다.
Spiral gear (Nautilus) produces continuous resistance for weight lifting.
Ball point and roller point pens for smooth ink distributionC.직선운동을 회전운동으로 변경한다. 원심력을 이용한다.
Produce linear motion of the cursor on the computer screen using a mouse or a trackball.
Replace wringing clothes to remove water with spinning clothes in a washing machine.
Use spherical casters instead of cylindrical wheels to move furniture.
Principle 15. Dynamics (동적 특성)
A. 작용의 단계별로 최적의 상태 또는 동작조건으로 물체, 외부환경, Process의 특성이 자동적으로 변하게 한다.
Adjustable steering wheel (or seat, or back support, or mirror position...)
B.물체를 부분으로 나누어 서로 상대적인 움직임이 가능하도록 한다.
The 'butterfly' computer keyboard, (also demonstrates Principle 7, 'Nested doll'.)
C.물체나 Process가 견고하거나 탄력적(Flexible)하지 않다면 움직이거나 교환가능한 것 또는 Adaptive 한 것으로 바꾼다.
The flexible boroscope for examining engines
The flexible sigmoidoscope, for medical examination
Principle 16. Partial or excessive actions (부분 또는 과대한 작용)
A.바라는 효과를 1005달성하기 어려운 상황이면 동일한 방법을 약간 적거나 많게 적용한다.
Over spray when painting, then remove excess. (Or, use a stencil--this is an application of Principle 3, Local Quality and Principle 9, Preliminary anti-action).
Fill, then 'top off' when filling the gas tank of your car.
Principle 17. Another dimension (차원의 변경)
A.물체를 2차원 또는 3차원 공간으로 이동시킨다.
Infrared computer mouse moves in space, instead of on a surface, for presentations. Five-axis cutting tool can be positioned where needed.
B.1층 배열 대신에 다층 배열로 물체를 정렬한다.
Cassette with 6 CD's to increase music time and variety
Electronic chips on both sides of a printed circuit board
Employees 'disappear' from the customers in a theme park, descend into a tunnel, and walk to their next assignment, where they return to the surface and magically reappear.C.물체를 기울이거나 방향성을 재조정하여 위치시킨다.
Dump truck
D.주어진 면의 반대쪽 면을 사용한다.
Stack microelectronic hybrid circuits to improve density.
Principle 18. Mechanical vibration (기계/기구적인 진동)
A.물체가 진동하거나 흔들리게 한다.
Electric carving knife with vibrating blades
B.주파수를 증가시킨다.(초음파 수준까지 확장시킨다)
Distribute powder with vibration.
C.물체자체의 반향/공진 주파수(Resonant Frequency)를 활용한다.
Destroy gall stones or kidney stones using ultrasonic resonance.
D.기계/기구적 진동원 대신에 압전 진동원(Piezoelectric Vibrators)을 사용한다.
Quartz crystal oscillations drive high accuracy clocks.
E.초음파와 전자기장을 결합한 진동원을 사용한다. (Use combined ultrasonic and electromagnetic field oscillations)
Mixing alloys in an induction furnace
Principle 19. Periodic Action (주기적인 작용)
A.연속적인 동작/작용 대신에 주기적 작용(Periodic or Pulsating Actions)을 사용한다.
Hitting something repeatedly with a hammer Replace a continuous siren with a pulsed sound.
B.동작 또는 작용이 주기적이라면 주기의 폭이나 주파수를 변화시킨다.
Use Frequency Modulation to convey information, instead of Morse code.
Replace a continuous siren with sound that changes amplitude and frequency.C.서로다른 작용의 수행을 위해서는 작용(Impulse)의 사이에 정체상태(Pause)를 둔다.
In cardio-pulmonary respiration (CPR) breathe after every 5 chest compressions.
Principle 20. Continuity of Useful Action (순기능/작용의 연속성)
A.연속적인 작용/작업을 수행한다. 작동기간중 물체의 모든 Parts에 부하/Capacity가 최대로 걸리게한다.
Flywheel (or hydraulic system) stores energy when a vehicle stops, so the motor can keep running at optimum power.
Run the bottleneck operations in a factory continuously, to reach the optimum pace. (From theory of constraints, or takt time operations)B.Idle 상태 또는 단속적인 모든 작용이나 작동을 제거한다.
Print during the return of a printer carriage--dot matrix printer, daisy wheel printers, inkjet printers.
Principle 21. Rushing Through (돌진) / Skipping (생략, 건너뜀)
A. 특정 Process나 단계(파손, 위험, 부작용이 우려되는 단계)는 고속으로 진행시킨다.
Use a high speed dentist's drill to avoid heating tissue.
Cut plastic faster than heat can propagate in the material, to avoid deforming the shape.
Principle 22. 'Blessing in Disguise' or 'Turn Lemons into Lemonade' (부작용을 순기능으로 활용)
A.부작용 요소(특히, 주위환경에 해로운 효과)들이 좋은 기능을 수행하도록 한다.
Use waste heat to generate electric power.
Recycle waste (scrap) material from one process as raw materials for another.B.주요 부작용과 다른 부작용을 결합함으로서 주요 부작용에 의한 효과를 제거하고 문제를 해결한다.
Add a buffering material to a corrosive solution.
Use a helium-oxygen mix for diving, to eliminate both nitrogen narcosis and oxygen poisoning from air and other nitrox mixes.C.부작용 요인(Harmful Factors)이 더이상 해롭지 않을 때까지 증폭/증가시킨다.
Use a backfire to eliminate the fuel from a forest fire.
Principle 23. Feedback (피드백의 활용)
A.Process와 작용을 개선하기 위해 Feedback을 도입한다. (이전과정의 참조, Cross-Checking)
Automatic volume control in audio circuits
Signal from gyrocompass is used to control simple aircraft autopilots.
Statistical Process Control (SPC) -- Measurements are used to decide when to modify a process. (Not all feedback systems are automated!)
Budgets --Measurements are used to decide when to modify a process.B.Feedback을 기존에 사용하고 있으면, 피드백의 크기(magnitude), 방향, 또는 영향도(influence)를 변경한다.
Change sensitivity of an autopilot when within 5 miles of an airport.
Change sensitivity of a thermostat when cooling vs. heating, since it uses energy less efficiently when cooling.
Change a management measure from budget variance to customer satisfaction.
Principle 24. 'Intermediary' (매개체의 활용)
A.작용을 매개/연결할 수 있는 물질이나 Process를 사용한다.
Carpenter's nailset, used between the hammer and the nail
B.하나의 물체를 후에 쉽게 제거할 수 있는 다른 물체와 임시적으로 결합시킨다.
Pot holder to carry hot dishes to the table
Principle 25. Self-Service (스스로 해결)
A.물체 스스로가 보조기능이나 수리/복구기능 등을 수행하도록 한다.
A soda fountain pump that runs on the pressure of the carbon dioxide that is used to 'fizz' the drinks.
This assures that drinks will not be flat, and eliminates the need for sensors.
Halogen lamps regenerate the filament during use--evaporated material is redeposited.
To weld steel to aluminum, create an interface from alternating thin strips of the 2 materials.
Cold weld the surface into a single unit with steel on one face and copper on the other, then use normal welding techniques to attach the steel object to the interface, and the interface to the aluminum. (Principle 24, Intermediary, Principle 4, Asymmetry)B.유용하지 않은 자원을 사용한다. (Use waste resources, energy, or substances)
Use heat from a process to generate electricity: 'Co-generation'.
Use animal waste as fertilizer.
Use food and lawn waste to create compost.
Principle 26. Copying (복사)
A.가용하지 않거나 고가이거나 깨지기 쉬운 물체(Object) 대신에 단순하면서 저렴한 복사물을 사용한다.
Virtual reality via computer instead of an expensive vacation
Listen to an audio tape instead of attending a seminar.B.작용의 대상이나 Process를 광학적 복사물로 대치한다.(Replace an object, or process with optical copies)
Do surveying from space photographs instead of on the ground.
Measure an object by measuring the photograph.
Make sonograms to evaluate the health of a fetus, instead of risking damage by direct testing.C.가시적인 광학적 복사물을 이미 사용하고 있다면 적외선이나 자외선을 이용한 복사물을 활용한다.
Make images in infrared to detect heat sources, such as diseases in crops, or intruders in a security system.
Principle 27. Cheap Short-Living Objects (단기간만 활용할 수 있는 물질도입)
A.고가의 물체를 저가의 물체들의 집합으로 대치하여 고가물체의 품질특성과 기능을 발휘하도록 한다. (예를들면 내구성)
Use disposable paper objects to avoid the cost of cleaning and storing durable objects.
Plastic cups in motels, disposable diapers, many kinds of medical supplies.
Principle 28 Mechanics Substitution (기구적인 시스템의 대체)
A.기구적인 시스템을 감각적인(Sensory) 시스템으로 대체한다. (광학적, 음향학적, 미각적, 후각적 특성을 갖는 시스템으로 대체)
Replace a physical fence to confine a dog or cat with an acoustic 'fence' (signal audible to the animal).
Use a bad smelling compound in natural gas to alert users to leakage, instead of a mechanical or electrical sensor.B.전기장, 자기장 또는 전자기장을 활용하여 물체와 작용시킨다.
To mix 2 powders, electrostatically charge one positive and the other negative.
Either use fields to direct them, or mix them mechanically and let their acquired fields cause the grains of powder to pair up.C. 에너지장을 정적인 상태에서 시간에 따라 움직이는(동적) 상태로 변경하고, 비구조적인 Field에서 구조적인 Field로 변경한다.
Early communications used omnidirectional broadcasting.
We now use antennas with very detailed structure of the pattern of radiation.D.에너지장에 의해 활성화되는(예를들면 Ferromagnetic) 입자와 결합된 Field를 사용한다.
Heat a substance containing ferromagnetic material by using varying magnetic field.
When the temperature exceeds the Curie point, the material becomes paramagnetic, and no longer absorbs heat.
Principle 29. Pneumatics and Hydraulics (공기력과 유체력에 의한 구조)
A.고형물의 Parts를 가스등의 기체나 액체로 대체시킨다.(기체/액체로 부풀리거나 완충역할, Hydrostatic, Hydro-Reactive등의 활용)
Comfortable shoe sole inserts filled with gel
Store energy from decelerating a vehicle in a hydraulic system, then use the stored energy to accelerate later.
Principle 30. Flexible Shells and Thin Films ( 유연한 피막 또는 얇은 필름의 활용)
A.3차원 구조대신에 유연한 표면이나 얇은 막을 사용한다.
Use inflatable (thin film) structures as winter covers on tennis courts.
B. 유연한 피막이나 얇은 막을 사용하여 대상물체를 외부환경과 격리시킨다.
Float a film of bipolar material (one end hydrophilic, one end hydrophobic) on a reservoir to limit evaporation.
Principle 31. Porous Materials (다공물질의 사용)
A.물체를 다공의 상태로 만들거나 다공의 요인을(삽입하거나 코팅처리 등) 추가한다.
Drill holes in a structure to reduce the weight.
B.물체가 기존에 이미 다공질이면 이러한 다공질을 이용할 수 있는 유용한 물질이나 기능을 도입한다.
Use a porous metal mesh to wick excess solder away from a joint.
Store hydrogen in the pores of a palladium sponge. (Fuel 'tank' for the hydrogen car--much safer than storing hydrogen gas)
Principle 25. Self-Service (스스로 해결)
A.물체 스스로가 보조기능이나 수리/복구기능 등을 수행하도록 한다.
A soda fountain pump that runs on the pressure of the carbon dioxide that is used to 'fizz' the drinks.
This assures that drinks will not be flat, and eliminates the need for sensors.
Halogen lamps regenerate the filament during use--evaporated material is redeposited.
To weld steel to aluminum, create an interface from alternating thin strips of the 2 materials.
Cold weld the surface into a single unit with steel on one face and copper on the other, then use normal welding techniques to attach the steel object to the interface, and the interface to the aluminum. (Principle 24, Intermediary, Principle 4, Asymmetry)B.유용하지 않은 자원을 사용한다. (Use waste resources, energy, or substances)
Use heat from a process to generate electricity: 'Co-generation'.
Use animal waste as fertilizer. Use food and lawn waste to create compost.
Principle 26. Copying (복사)
A.가용하지 않거나 고가이거나 깨지기 쉬운 물체(Object) 대신에 단순하면서 저렴한 복사물을 사용한다.
Virtual reality via computer instead of an expensive vacation
Listen to an audio tape instead of attending a seminar.B.작용의 대상이나 Process를 광학적 복사물로 대치한다.(Replace an object, or process with optical copies)
Do surveying from space photographs instead of on the ground.
Measure an object by measuring the photograph.
Make sonograms to evaluate the health of a fetus, instead of risking damage by direct testing.C.가시적인 광학적 복사물을 이미 사용하고 있다면 적외선이나 자외선을 이용한 복사물을 활용한다.
Make images in infrared to detect heat sources, such as diseases in crops, or intruders in a security system.
Principle 27. Cheap Short-Living Objects (단기간만 활용할 수 있는 물질도입)
A.고가의 물체를 저가의 물체들의 집합으로 대치하여 고가물체의 품질특성과 기능을 발휘하도록 한다. (예를들면 내구성)
Use disposable paper objects to avoid the cost of cleaning and storing durable objects.
Plastic cups in motels, disposable diapers, many kinds of medical supplies.
Principle 28 Mechanics Substitution (기구적인 시스템의 대체)
A.기구적인 시스템을 감각적인(Sensory) 시스템으로 대체한다. (광학적, 음향학적, 미각적, 후각적 특성을 갖는 시스템으로 대체)
Replace a physical fence to confine a dog or cat with an acoustic 'fence' (signal audible to the animal).
Use a bad smelling compound in natural gas to alert users to leakage, instead of a mechanical or electrical sensor.B.전기장, 자기장 또는 전자기장을 활용하여 물체와 작용시킨다.
To mix 2 powders, electrostatically charge one positive and the other negative.
Either use fields to direct them, or mix them mechanically and let their acquired fields cause the grains of powder to pair up.C. 에너지장을 정적인 상태에서 시간에 따라 움직이는(동적) 상태로 변경하고, 비구조적인 Field에서 구조적인 Field로 변경한다.
Early communications used omnidirectional broadcasting.
We now use antennas with very detailed structure of the pattern of radiation.D.에너지장에 의해 활성화되는(예를들면 Ferromagnetic) 입자와 결합된 Field를 사용한다.
Heat a substance containing ferromagnetic material by using varying magnetic field.
When the temperature exceeds the Curie point, the material becomes paramagnetic, and no longer absorbs heat.
Principle 29. Pneumatics and Hydraulics (공기력과 유체력에 의한 구조)
A.고형물의 Parts를 가스등의 기체나 액체로 대체시킨다.(기체/액체로 부풀리거나 완충역할, Hydrostatic, Hydro-Reactive등의 활용)
Comfortable shoe sole inserts filled with gel
Store energy from decelerating a vehicle in a hydraulic system, then use the stored energy to accelerate later.
Principle 30. Flexible Shells and Thin Films ( 유연한 피막 또는 얇은 필름의 활용)
A.3차원 구조대신에 유연한 표면이나 얇은 막을 사용한다.
Use inflatable (thin film) structures as winter covers on tennis courts.
B. 유연한 피막이나 얇은 막을 사용하여 대상물체를 외부환경과 격리시킨다.
Float a film of bipolar material (one end hydrophilic, one end hydrophobic) on a reservoir to limit evaporation.
Principle 31. Porous Materials (다공물질의 사용)
A.물체를 다공의 상태로 만들거나 다공의 요인을(삽입하거나 코팅처리 등) 추가한다.
Drill holes in a structure to reduce the weight.
B.물체가 기존에 이미 다공질이면 이러한 다공질을 이용할 수 있는 유용한 물질이나 기능을 도입한다.
Use a porous metal mesh to wick excess solder away from a joint.
Store hydrogen in the pores of a palladium sponge. (Fuel 'tank' for the hydrogen car--much safer than storing hydrogen gas)
Principle 32. Color Changes (색상의 변경)
A.대상 물체의 색상이나 외부환경의 색상을 변경한다.
Use safe lights in a photographic darkroom.
B.대상 물체의 투명도나 외부환경의 투명도를 변경한다.
Use photolithography to change transparent material to a solid mask for semiconductor processing.
Similarly, change mask material from transparent to opaque for silk screen processing.C. 색상을 가진 첨가제를 넣어 대상물체와 Process를 관찰을 쉽게 한다.
D. 색상 첨가물을 기존에 사용하고 있다면 발광성의 특성을 사용한다.
Principle 33. Homogeneity (균일/균질성)
A.상호작용하는 두개의 물체들을 동일한 물질 또는 동일한 특성을 발휘하는 물질로 만든다.
Make the container out of the same material as the contents, to reduce chemical reactions.
Make a diamond cutting tool out of diamonds.
Principle 34. Discarding and Recovering (처분하고 복구)
A.물체를 구성하는 요소가 기능을 완료한 이후 불필요한 경우에는 그 요소를 동작중에 처분(분해 또는 증발)하거나 수정시킨다.
Use a dissolving capsule for medicine.
Sprinkle water on cornstarch-based packaging and watch it reduce its volume by more than 1000X!
Ice structures: use water ice or carbon dioxide (dry ice) to make a template for a rammed earth structure, such as a temporary dam.
Fill with earth, then, let the ice melt or sublime to leave the final structure.B.물체의 소모성 Parts에 대해서는 동작중에 재복구되도록 한다.
Self-sharpening lawn mower blades
Automobile engines that give themselves a 'tune up' while running (the ones that say '100,000 miles between tune ups')
Principle 35. Parameter Changes (품질특성 모수의 변경, 물체의 물리/화학적 상태의 변경)
A.대상 물체의 물리적인 상태(기체,액체,고체상태 등)를 변화시킨다.
Freeze the liquid centers of filled candies, then dip in melted chocolate, instead of handling the messy, gooey, hot liquid.
Transport oxygen or nitrogen or petroleum gas as a liquid, instead of a gas, to reduce volume.B.대상물체의 농도나 밀도를 변화시킨다.
Liquid hand soap is concentrated and more viscous than bar soap at the point of use, making it easier to dispense in the correct amount and more sanitary when shared by several people.
C.대상물체의 유연도를 변경시킨다.(Change the degree of flexibility)
Use adjustable dampers to reduce the noise of parts falling into a container by restricting the motion of the walls of the container.
Vulcanize rubber to change its flexibility and durability.D.물체의 온도를 변화시킨다.
Raise the temperature above the Curie point to change a ferromagnetic substance to a paramagnetic substance.
Raise the temperature of food to cook it. (Changes taste, aroma, texture, chemical properties, etc.)
Lower the temperature of medical specimens to preserve them for later analysis.
Principle 36. Phase Transitions (상태 전이)
A.상태전이 과정에서 발생되는 현상을 이용한다. (예를 들면 부피변화, 열손실 또는 흡수 등)
Water expands when frozen, unlike most other liquids.
Hannibal is reputed to have used this when marching on Rome a few thousand years ago.
Large rocks blocked passages in the Alps.
He poured water on them at night. The overnight cold froze the water, and the expansion split the rocks into small pieces which could be pushed aside.
Heat pumps use the heat of vaporization and heat of condensation of a closed thermodynamic cycle to do useful work.
Principle 37. Thermal Expansion (열팽창)
A.물체의 열팽창 또는 수축 특성을 이용한다.
Fit a tight joint together by cooling the inner part to contract, heating the outer part to expand, putting the joint together, and returning to equilibrium.
B.열팽창 특성을 사용하고 있다면 열팽창계수가 서로다른 여러가지 물체를 사용한다.
The basic leaf spring thermostat: (2 metals with different coefficients of expansion are linked so that it bends one way when warmer than nominal and the opposite way when cooler.)
Principle 38. Strong Oxidants (강 산성화의 활용)
A.일반적인 공기를 산소가 풍부한 공기로 대치한다.
Scuba diving with Nitrox or other non-air mixtures for extended endurance
B.산소가 풍부한 공기를 순수산소로 대치한다.
Cut at a higher temperature using an oxy-acetylene torch.
Treat wounds in a high pressure oxygen environment to kill anaerobic bacteria and aid healing.C.공기 또는 산소에 노출시켜 이온화한다.(Expose air or oxygen to ionizing radiation)
D.이온화된 산소를 사용한다.
Ionize air to trap pollutants in an air cleaner.
E.이온화된 산소를 오존으로 대치한다.
Speed up chemical reactions by ionizing the gas before use.
Principle 39. Inert Atmosphere (비활성 대기/대류)
A.일반적인 외부환경을 비활성 상태로 변경상다.
Prevent degradation of a hot metal filament by using an argon atmosphere.
B.물체에 중성의 요소나 비활성 첨가물을 넣는다.
Increase the volume of powdered detergent by adding inert ingredients.
This makes it easier to measure with conventional tools.
Principle 40. Composite Materials (복합/합성 물질의 활용)
A.균일/균질의 물체를 복합/다중의 물질로 변경한다.
Composite epoxy resin/carbon fiber golf club shafts are lighter, stronger, and more flexible than metal.
Same for airplane parts.
Fiberglass surfboards are lighter and more controllable and easier to form into a variety of shapes than wooden ones.
그 외...
41. Usage of Pauses (정지의 활용)
42. Multistep Action Principle (다단계 작용)
43. Use of Foam (거품의 활용)
44. Use of Put in Parts (공간활용)
45. Bi-Principle (이중의 원칙)
46. Explosives and Powders Application (폭발성과 가루의 응용)
47. Assembling on (in) the Water (물에서의 결합/조립)
48. 'Sack with Vacuum' (진공활용)
49. Dissociation-Association (분해와 결합)
50. Self-Organization Principle (자기 조직화 원리)
첫댓글 신재균 교수님이 가지고 계시는 책을 예전에 보긴 봤는데... 아직도 모르겠음.
ㅡㅡ: 해석점해주시지.