A "Recollector" brand refrigerator showing error code F1 indicates low power protection and can be resolved by adjusting "the voltage cut-off setting"(전압차단설정) to "M" or "L" using the gear button, or by charging the unit with the adapter.
오류 코드 F1이 표시되는 "리콜렉터" 브랜드 냉장고는 저전력 보호를 나타내며, 기어 버튼을 사용하여 전압 차단 설정을 "M" 또는 "L"로 조정하거나 어댑터로 장치를 충전하여 문제를 해결할 수 있습니다.
If the error persists, the F1 code may also signal a thermostat issue for brands like Electrolux, a sensor or wiring problem on certain models like PTAC units, or a general electrical or control board malfunction.
For Recollector/Battery-Powered Refrigerators: Locate the Gear Button: Press the "Gear" button on the display until the battery cut-off indicator (defaulting to "H") starts blinking.
Change the Cut-Off Setting: Tap the "Gear" button again to cycle the setting from "H" to "M" or "L".
Set for Lithium Batteries: If you have an internal lithium battery, it must be set to "L".
Check Voltage: If the issue is low power, charge the unit with the adapter for a few minutes to allow it to reset.
For Other Refrigerator Brands:
LG:
An F1 error on an LG refrigerator can point to a faulty evaporator fan motor, a problem with the control board, or faulty temperature sensors.
Electrolux:
An F1 code on an Electrolux fridge indicates a problem with the thermostat, requiring a service engineer.
Haier:
For Haier appliances, an F1 error often means you should request a technician to check the unit, as users cannot resolve this code themselves.
Bougerv:
Similar to other battery-powered fridges, an F1 error on a Bougerv unit means the input voltage is too low, and you should adjust the battery protection level to "Medium" or "Low".
General Troubleshooting Steps:
Unplug and Reset:
Try unplugging the refrigerator for a few minutes and then plugging it back in.
Check Vents and Gaskets:
Ensure that the vents inside the refrigerator are not blocked, and check that the doors are completely closed and the gaskets are intact.
When to Call a Professional:
If the error code persists after these troubleshooting steps, or if you are unsure about making the adjustments, contact a qualified service technician for assistance.