VD6, D2, JP54

[Mr. M]

Gyula Palffy 

palffygyula@gmail.com

VD6

Quantity:  200K MT spot, w/ separate contract for additional

Price:        $625 gross / $610 net per MT

Liftable:    200K MT

Port:          Rotterdam

Commission:  50% sell side (closed) / 50% buy side (open)

D2 

Quantity:  200K MT spot w/ separate contract for additional

Price:        $820 gross / $800 net per MT

Liftable:    200K MT

Port:          Rotterdam

Commission:  50% sell side (closed) / 50% buy side (open)

JP54

Quantity:  1mm BBL spot w/ separate contract for additional

Price:         $115 gross / $110 net per BBL

Liftable:    1mm BBLS

Port:           Rotterdam

Commission:  50% sell side (closed) / 50% buy side (open)

*Contract Quantities May Be Increased To Larger Amounts On Most Offers.

*Prices may be subject to change prior to SPA being issued due to market conditions.   

TO GET STARTED..... BUYER MUST FIRST SUBMIT A CORPORATE PROFILE ALONG WITH A

                                  STATEMENT OF ACCEPTANCE OF THE PROCEDURES LISTED BELOW.

Non-Negotiable Procedures:

1. SELLER SENDS COMPLETE SPA TO BUYER FOR SIGNING. BUYER SENDS SIGNED COPY TO SELLER MANDATE AND LODGES A COPY WITH HIS TOP 25 BANK.

2. UPON RECEIPT OF SIGNED SPA, THE BUYER, USING A TOP 25 BANK, WILL HAVE HIS BANK OFFICER SEND TO SELLER’S BANK, VIA SWIFT MT700 MESSAGE FORM, STIPULATING THAT THE BUYER HAS THE FUNDS TO PAY SELLER FOR THE PURCHASE, AFTER A SUCCESSFUL DIP TEST AND INSPECTION.  BUYER'S BANK GUARANTEES THAT THEY WILL SEND AN MT103 TO PAY SELLER IN FULL AFTER A SUCCESSFUL DIP TEST.  WHEN THE SWIFT MT700 MESSAGE IS RECEIVED AND THE TRACKING NUMBER IS FORWARDED TO THE MANDATE, ALL POP DOCUMENTS ARE SENT TO THE BUYER'S BANK.  PLEASE MARK THE SWIFT MESSAGE AS "URGENT" IN ORDER TO HELP FACILITATE THE TRANSMITTAL OF THE MESSAGE IN A MORE TIMELY MANNER. 

NOTE>>> THE BUYER HAS 36 HOURS AFTER THE RECEIPT OF SIGNED SPA TO INITIATE AND SUBMIT THE AFOREMENTIONED SWIFT TO THE SELLER'S BANK.  IF SWIFT NUMBER IS NOT RECEIVED BY THE BUYER'S MANDATE WITHIN THIS TIME PERIOD, THE CONTRACT WILL REVERT TO BE NULL AND VOID.  PRODUCT IS OFFERED ON A FIRST COME, FIRST SERVED BASIS, BASED ON SELLER'S RECEIPT OF BUYER'S COMPLETED AND EXECUTED SPA AND SWIFT. 

3. A TOP 25 BANK IS NECESSARY FOR PAYMENT OF EACH VESSEL, AFTER A SUCCESSFUL DIP TEST IS ACCEPTED.  PAYMENT IS BY MT103 FOR EACH VESSEL DELIVERY IN ROTTERDAM. 

PAYMENT:

Through swift and routing codes for inspection certificate and all cargo documents, Payment commitment is initiated with MT103 by the buyer’s bank.  Final payment is made by swift transfer immediately.

POP DOCUMENTS INCLUDE:

1)     Seller’s COMMERCIAL INVOICE, one (1) original and three (3) copies

2)     VORE Ltd. Certificate of Inspection, CALIBRATE Certificate of Inspection or    Saybolt Certificate of Quality and Quantity, One (1) original and three (3)

      copies shall be tendered.

3)     Certificate of Origin, one (1) Original and three (3) copies

4)     Certificate of Authenticity, One (1) original and three (3) copies  

5)     TSR(s)

6)     DTA performed by SGS can be done anytime after the SWIFT DOCUMENT IS RECEIVED AND ACKNOWLEDGED, but in particular, at the port of discharge,

      before money and title change hands.

PROCEDURES ARE FIRM!

SPECIFICATIONS for LOW POUR FUEL OIL (LPFO- VD6)
Method		Test		Result
ASTM D5002		Density and Relative Density of Crude Oils Average API Gravity		28.7 (28.7) (Min) API
ASTM D1298-99		Density @15 Deg C		0.87 (0.8775)(Max) Kg/t
ASTM D97		Pour Point of Petroleum Products
°C		Pour Point		< - 33.0 (-36.0) (BELOW ZERO)
°F		Pour Point		< - 27.4 (-32.8) (BELOW ZERO)
ASTM D93 – IP 34		Pensky-Martens Closed Cup Flash Point
		Corrected Flash Point		117 (137) (MIN)
ASTM D4294		Sulfur Content in Petroleum Products by ED-XRF Sulfur Content		0.35 Wt% (MAX)
ASTM D445		Kinematic /Dynamic Viscosity, Kinematic Viscosity @ 122 °F/ 50°C		83 (18.12) (MAX) Mm2/s
ASTM D6304		Water Content by Coulometric Karl Fisher Titration Water Content		0.20 (0.7) (MAX) Wt%
ASTM D482		Ash from Petroleum Products, Average Ash		0.279 (1.007) (MAX) Wt%
ASTM D2161		Conversion of Kinematic Viscosity, To SUS/SFS 1 Sayboltfuroi viscosity 122°F		10.9SFS (MAX)
ASTM D5184		Aluminum and Silicon in Fuel Oils by ICP-AES or AAS
		Aluminum Content		102 (MAX) Mg/kg
		Silicon Content		93 (MAX) Mg/kg
ASTMD95		Water by Distillation, Vol %		0.70 (MAX) vol%
ASTMD4530.06		Carbon Residue		1.11 (MAX) Wt%
Method Test Result Units		IP 143 Asphalteness  (Heptane Insolubles)
Asphaltene Content				0.080 Wt%
P 501 Determination of AL, Si, V, Ni, Fe, Na, Ca, Zn, P in Fuel Oil –ICPES
1 Aluminum	372		mg/kg
Silicon	I87		mg/kg
1Sodium	117		mg/kg
Vanadium	1		mg/kg
1 Calcium	779		mg/kg
1 Zinc	298		mg/kg
1 Phosphorus	4176		mg/kg
1 Iron	545		mg/kg

_______________________________________________________________________________________

 SPECIFICATION OF THE PRODUCT :  GASOIL D2 L 02/62 GOST 30582

RUSSIAN GAS OIL D2 GOST 305-82

COMPONENT                    UNIT    MIN    MAX

Density                        @ 20 deg C    Kg / mі      0.870

Colour                         2.0

Flash point,                             PMCC     Deg C (°C)   57    62

Kinematic viscosity@20C      ST   3.0    6.0 deg C

Pour point                    Deg C (°C)   (*)    -10.0

Cloud point                       Deg C (°C)  (*)   -5.0

Mercaptansulphur      0.01

Acidity, mg / 1000 cmі            5

Iodine number g/100g             6

Ash %wt                                  0.01

Total Sulphur %wt       0.02   0.05

Copper corrosion        3hrs@50 deg C (typical)   1 A  %wt  20 

CCR                                        on 10% Residues

Cetane index                           45 

Distillation range :

- 50% Recovered Volume       deg C (°C)      280

- 90% Recovered Volume       deg C (°C)     360

- Bacteria MBC                                   Fibre / it      500

- Bacteria CFU                                    Fibre / it      1000

• Summer from March to October (PP – 5.0 degrees C)

• Summer from March to October (CP – 0.0 degrees C)

• Winter from November to February (PP – 10.0 degrees C)

• Winter from November to February (CP – 5.0 degrees C)

 ______________________________________________________________________________________

SPECIFICATION OF THE PRODUCT : GASOIL JP54 L 02/62 GOST 30582

RUSSIAN GAS OIL JP54 GOST 305-82

COMPONENT                    UNIT    MIN    MAX

Density             @ 20 deg C    Kg / mі      0.870

Colour                           2.0

Flash point,                               PMCC     Deg C (°C)   57    62

Kinematic viscosity@20C           ST   3.0    6.0 deg C

Pour point                     Deg C (°C)   (*)    -10.0

Cloud point                          Deg C (°C)  (*)   -5.0

Mercaptansulphur         0.01

Acidity, mg / 1000 cmі               5

Iodine number g/100g    6

Ash %wt                                   0.01

Total Sulphur %wt          0.02   0.05

Copper corrosion            3hrs@50 deg C (typical)   1 A  %wt  20 

CCR                                         on 10% Residues

Cetane index                             45 

Distillation range :

- 50% Recovered Volume            deg C (°C)      280

- 90% Recovered Volume            deg C (°C)     360

- Bacteria MBC                                      Fibre / it      500

- Bacteria CFU                                       Fibre / it      1000

• Summer from March to October (PP – 5.0 degrees C)

• Summer from March to October (CP – 0.0 degrees C)

• Winter from November to February (PP – 10.0 degrees C)

• Winter from November to February (CP – 5.0 degrees C)

_____________________________________________________________