단축키 변경하기...

[美세상(최승일)]

캐드에서
풀다운메뉴/도구(T)/사용자화(C)/사용자파일편집(E)/프로그램매개변수(P)(acad.pgp) 에 들어가셔서 바꾸시면 됩니다.

;
;
;  Program Parameters File For AutoCAD 2006
;  External Command and Command Alias Definitions

;  Copyright (C) 1997-2005 by Autodesk, Inc.  All Rights Reserved.

;  Each time you open a new or existing drawing, AutoCAD searches
;  the support path and reads the first acad.pgp file that it finds.

;  -- External Commands --
;  While AutoCAD is running, you can invoke other programs or utilities
;  such Windows system commands, utilities, and applications.
;  You define external commands by specifying a command name to be used
;  from the AutoCAD command prompt and an executable command string
;  that is passed to the operating system.

;  -- Command Aliases --
;  The Command Aliases section of this file provides default settings for
;  AutoCAD command shortcuts.  Note: It is not recommended that  you directly
;  modify this section of the PGP file., as any changes you make to this section of the
;  file will not migrate successfully if you upgrade your AutoCAD to a
;  newer version.  Instead, make changes to the new
;  User Defined Command Aliases
;  section towards the end of this file.

;  -- User Defined Command Aliases --
;  You can abbreviate frequently used AutoCAD commands by defining
;  aliases for them in the User Defined Command Aliases section of acad.pgp.
;  You can create a command alias for any AutoCAD command,
;  device driver command, or external command.

;  Recommendation: back up this file before editing it.  To ensure that
;  any changes you make to PGP settings can successfully be migrated
;  when you upgrade to the next version of AutoCAD, it is suggested that
;  you make any changes to the default settings in the User Defined Command
;  Aliases section at the end of this file.

;  External command format:
;  <Command name>,[<Shell request>],<Bit flag>,[*]<Prompt>,

;  The bits of the bit flag have the following meanings:
;  Bit 1: if set, don't wait for the application to finish
;  Bit 2: if set, run the application minimized
;  Bit 4: if set, run the application "hidden"
;  Bit 8: if set, put the argument string in quotes
;
;  Fill the "bit flag" field with the sum of the desired bits.
;  Bits 2 and 4 are mutually exclusive; if both are specified, only
;  the 2 bit is used. The most useful values are likely to be 0
;  (start the application and wait for it to finish), 1 (start the
;  application and don't wait), 3 (minimize and don't wait), and 5
;  (hide and don't wait). Values of 2 and 4 should normally be avoided,
;  as they make AutoCAD unavailable until the application has completed.
;
;  Bit 8 allows commands like DEL to work properly with filenames that
;  have spaces such as "long filename.dwg".  Note that this will interfere
;  with passing space delimited lists of file names to these same commands.
;  If you prefer multiplefile support to using long file names, turn off
;  the "8" bit in those commands.

;  Examples of external commands for command windows

CATALOG,   DIR /W,         8,파일 지정사항: ,
DEL,       DEL,            8,삭제할 파일: ,
DIR,       DIR,            8,파일 지정사항: ,
EDIT,      START EDIT,     9,편집할 파일: ,
SH,        ,               1,*OS 명령: ,
SHELL,     ,               1,*OS 명령: ,
START,     START,          1,*시작할 응용프로그램: ,
TYPE,      TYPE,           8,나열할 파일: ,

; Examples of external commands for Windows
; See also the (STARTAPP) AutoLISP function for an alternative method.

EXPLORER,  START EXPLORER, 1,,
NOTEPAD,   START NOTEPAD,  1,*편집할 파일: ,
PBRUSH,    START PBRUSH,   1,,

; Command alias format:
;   <Alias>,*<Full command name>

;  The following are guidelines for creating new command aliases.
;  1. An alias should reduce a command by at least two characters.
;      Commands with a control key equivalent, status bar button,
;      or function key do not require a command alias.
;      Examples: Control N, O, P, and S for New, Open, Print, Save.
;  2. Try the first character of the command, then try the first two,
;      then the first three.
;  3. Once an alias is defined, add suffixes for related aliases:
;      Examples: R for Redraw, RA for Redrawall, L for Line, LT for
;      Linetype.
;  4. Use a hyphen to differentiate between command line and dialog
;      box commands.
;      Example: B for Block, -B for -Block.
;
; Exceptions to the rules include AA for Area, T for Mtext, X for Explode.

;  -- Sample aliases for AutoCAD commands --                  
;  These examples include most frequently used commands.  NOTE: It is recommended
;  that you not make any changes to this section of the PGP file to ensure the
;  proper migration of your customizations when you upgrade to the next version of
;  AutoCAD.  The aliases listed in this section are repeated in the User Custom
;  Settings section at the end of this file, which can safely be edited while
;  ensuring your changes will successfully migrate.

3A,        *3DARRAY (3차원배열)
3DO,       *3DORBIT
3F,        *3DFACE (3차원면만들기)
3P,        *3DPOLY
A,         *ARC (호)
AC,        *BACTION
ADC,       *ADCENTER
AA,        *AREA (면적)
AL,        *ALIGN (3차원이동배열)
AP,        *APPLOAD
AR,        *ARRAY (배열)
-AR,       *-ARRAY (-배열)
ATT,       *ATTDEF
-ATT,      *-ATTDEF
ATE,       *ATTEDIT (속성편집)
-ATE,      *-ATTEDIT
ATTE,      *-ATTEDIT
B,         *BLOCK (블럭)
-B,        *-BLOCK (-블럭)
BC,        *BCLOSE
BE,        *BEDIT
BH,        *HATCH (해치)
BO,        *BOUNDARY (경계영역설정)
-BO,       *-BOUNDARY
BR,        *BREAK (자르기)
BS,        *BSAVE
C,         *CIRCLE (원)
CH,        *PROPERTIES
-CH,       *CHANGE (바꾸기)
CHA,       *CHAMFER (모따기)
CHK,       *CHECKSTANDARDS
CLI,       *COMMANDLINE
COL,       *COLOR (색상)
COLOUR,    *COLOR
CO,        *COPY (복사)
CP,        *COPY
CT,        *CTABLESTYLE
D,         *DIMSTYLE
DAL,       *DIMALIGNED
DAN,       *DIMANGULAR
DAR,       *DIMARC
JOG,       *DIMJOGGED
DBA,       *DIMBASELINE
DBC,       *DBCONNECT
DC,        *ADCENTER
DCE,       *DIMCENTER
DCENTER,   *ADCENTER
DCO,       *DIMCONTINUE
DDA,       *DIMDISASSOCIATE
DDI,       *DIMDIAMETER
DED,       *DIMEDIT
DI,        *DIST (거리)
DIV,       *DIVIDE
DJO,       *DIMJOGGED
DLI,       *DIMLINEAR
DO,        *DONUT (도넛그리기)
DOR,       *DIMORDINATE
DOV,       *DIMOVERRIDE
DR,        *DRAWORDER
DRA,       *DIMRADIUS
DRE,       *DIMREASSOCIATE
DRM,       *DRAWINGRECOVERY
DS,        *DSETTINGS
DST,       *DIMSTYLE
DT,        *TEXT (문자)
DV,        *DVIEW (동적뷰)
E,         *ERASE (지우기)
ED,        *DDEDIT (문자수정)
EL,        *ELLIPSE (타원그리기)
EX,        *EXTEND (연장)
EXIT,      *QUIT
EXP,       *EXPORT
EXT,       *EXTRUDE (돌출)
F,         *layoff
FI,        *FILTER
G,         *GROUP
-G,        *-GROUP
GD,        *GRADIENT
GR,        *DDGRIPS (DD잡기점)
H,         *HATCH (해치)
-H,        *-HATCH
HE,        *HATCHEDIT
HI,        *HIDE (은선제거)은선감추기
I,         *layiso
-I,        *-INSERT
IAD,       *IMAGEADJUST
IAT,       *IMAGEATTACH
ICL,       *IMAGECLIP
IM,        *IMAGE
-IM,       *-IMAGE
IMP,       *IMPORT!
IN,        *INTERSECT (교차부분남기기)
INF,       *INTERFERE (겹부분새로생성하기)
IO,        *INSERTOBJ
J,         *JOIN
L,         *LINE (선)
LA,        *LAYER (도면층)레이어설정
-LA,       *-LAYER
LE,        *QLEADER
LEN,       *LENGTHEN
LI,        *LIST
LINEWEIGHT, *LWEIGHT
LO,        *-LAYOUT
LS,        *LIST (정보보기)
LT,        *LINETYPE (선형태)
-LT,       *-LINETYPE
LTYPE,     *LINETYPE
-LTYPE,    *-LINETYPE
LTS,       *LTSCALE (선형태척도)
LW,        *LWEIGHT
M,         *MOVE (이동)
MA,        *MATCHPROP
ME,        *MEASURE
MI,        *MIRROR (대칭반사)
ML,        *MLINE (다중행선그리기)
MO,        *PROPERTIES
MS,        *MSPACE
MSM,       *MARKUP
MT,        *MTEXT (다중행문자)
MV,        *MVIEW (다중뷰)
O,         *layon
OP,        *OPTIONS
ORBIT,     *3DORBIT
OS,        *OSNAP (객체스냅)스냅설정
-OS,       *-OSNAP
P,         *PAN (화면이동)
-P,        *-PAN
PA,        *PASTESPEC
PARAM,     *BPARAMETER
PARTIALOPEN, *-PARTIALOPEN
PE,        *PEDIT (폴리선편집)
PL,        *PLINE (폴리선)
PO,        *POINT (점)
POL,       *POLYGON (다각형그리기)
PR,        *PROPERTIES
PRCLOSE,   *PROPERTIESCLOSE
PROPS,     *PROPERTIES
PRE,       *PREVIEW
PRINT,     *PLOT (플롯)
PS,        *PSPACE
PTW,       *PUBLISHTOWEB
PU,        *PURGE (정리)
-PU,       *-PURGE
QC,        *QUICKCALC
R,         *REDRAW (화면정리)화면다시그리기
RA,        *REDRAWALL (전화면정리)
RE,        *REGEN (재생성)화면해상도좋게
REA,       *REGENALL (전체 재생성)해상도좋게
REC,       *RECTANG
REG,       *REGION (면만들기)
REN,       *RENAME (이름바꾸기)
-REN,      *-RENAME
REV,       *REVOLVE (회전하기)
RO,        *ROTATE (회전)
RPR,       *RPREF
RR,        *RENDER
S,         *STRETCH (늘리기)
SC,        *SCALE (축소 확대하기)솔리드자르기
SCR,       *SCRIPT (스크립트)스크립트파일
SE,        *DSETTINGS
SEC,       *SECTION (솔리드단면)
SET,       *SETVAR (변수설정)
SHA,       *SHADEMODE
SL,        *SLICE
SN,        *SNAP (스냅)
SO,        *SOLID (솔리드)
SP,        *SPELL (문자검사)
SPL,       *SPLINE (곡선그리기)
SPE,       *SPLINEDIT
SSM,       *SHEETSET
ST,        *STYLE (문자스타일)
STA,       *STANDARDS
SU,        *SUBTRACT
T,         *MTEXT
-T,        *-MTEXT
TA,        *TABLET (타블렛)
TB,        *TABLE
TH,        *THICKNESS
TI,        *TILEMODE
TO,        *TOOLBAR (도구막대부르기)
TOL,       *TOLERANCE
TOR,       *TORUS (솔리드튜브만들기)
TP,        *TOOLPALETTES
TR,        *TRIM (자르기)
TS,        *TABLESTYLE
UC,        *UCSMAN
UN,        *UNITS (단위)
-UN,       *-UNITS
UNI,       *UNION (솔리드합치기)
V,         *VIEW (뷰)
-V,        *-VIEW
VP,        *DDVPOINT
-VP,       *VPOINT (관측점)물체관측점위치설정
VS,        *BVSTATE
W,         *WBLOCK (블록쓰기)
-W,        *-WBLOCK
WE,        *WEDGE (솔리드쐬기그리기)
X,         *EXPLODE (분해)
XA,        *XATTACH
XB,        *XBIND (외부결합)
-XB,       *-XBIND
XC,        *XCLIP
XL,        *XLINE (무한선그리기)
XR,        *XREF (외부참조)
-XR,       *-XREF
Z,         *ZOOM (줌 확대 축소)

; The following are alternative aliases and aliases as supplied
;  in AutoCAD Release 13.

AV,        *DSVIEWER
CP,        *COPY
DIMALI,    *DIMALIGNED
DIMANG,    *DIMANGULAR
DIMBASE,   *DIMBASELINE
DIMCONT,   *DIMCONTINUE
DIMDIA,    *DIMDIAMETER
DIMED,     *DIMEDIT
DIMTED,    *DIMTEDIT
DIMLIN,    *DIMLINEAR
DIMORD,    *DIMORDINATE
DIMRAD,    *DIMRADIUS
DIMSTY,    *DIMSTYLE
DIMOVER,   *DIMOVERRIDE
LEAD,      *LEADER
TM,        *TILEMODE

; Aliases for Hyperlink/URL Release 14 compatibility
SAVEURL, *SAVE
OPENURL,   *OPEN
INSERTURL, *INSERT (삽입)

; Aliases for commands discontinued in AutoCAD 2000:
AAD,        *DBCONNECT
AEX,        *DBCONNECT
ALI,        *DBCONNECT
ASQ,        *DBCONNECT
ARO,        *DBCONNECT
ASE,        *DBCONNECT
DDATTDEF,   *ATTDEF (DD속성정의)
DDATTEXT,   *ATTEXT (속성추출)
DDCHPROP,   *PROPERTIES(DD특성바꾸기)
DDCOLOR,    *COLOR
DDLMODES,   *LAYER  (DD요소설정)도면층
DDLTYPE,    *LINETYPE
DDMODIFY,   *PROPERTIES
DDOSNAP,    *OSNAP
DDUCS,      *UCS

; Aliases for commands discontinued in AutoCAD 2004:
ACADBLOCKDIALOG,  *BLOCK
ACADWBLOCKDIALOG, *WBLOCK
ADCENTER,         *ADCENTER
BMAKE,              *BLOCK
BMOD,             *BLOCK
BPOLY,              *BOUNDARY
CONTENT,          *ADCENTER
DDATTE,             *ATTEDIT(속성편집)
DDIM,             *DIMSTYLE
DDINSERT,         *INSERT
DDPLOTSTAMP,      *PLOTSTAMP
DDRMODES,         *DSETTINGS
DDSTYLE,          *STYLE
DDUCS,              *UCSMAN
DDUCSP,             *UCSMAN
DDUNITS,          *UNITS
DDVIEW,             *VIEW
DIMHORIZONTAL,      *DIMLINEAR
DIMROTATED,         *DIMLINEAR
DIMVERTICAL,      *DIMLINEAR
DOUGHNUT,         *DONUT
DTEXT,              *TEXT
DWFOUT,             *PLOT
DXFIN,              *OPEN
DXFOUT,             *SAVEAS
PAINTER,          *MATCHPROP
PREFERENCES,      *OPTIONS
RECTANGLE,          *RECTANG
SHADE,              *SHADEMODE
VIEWPORTS,          *VPORTS

;  -- User Defined Command Aliases --
;  Make any changes or additions to the default AutoCAD command aliases in
;  this section to ensure successful migration of these settings when you
;  upgrade to the next version of AutoCAD.  If a command alias appears more
;  than once in this file, items in the User Defined Command Alias take
;  precedence over duplicates that appear earlier in the file.
;  **********----------**********  ; No xlate ; DO NOT REMOVE

출처 :

[kyoyu]

참고.. 적용 방법은 2가지가 있습니다. 캐드를 껏다 키는 방법과 REINIT를 치신후 PGP를 체크 해주시면 설정 됩니다...