My Pendrive is Sandisk........8GB.
|
SMI Mass Production Tool 1.17.13.rar
Anonymous said...
Description: USB Mass Storage Device
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 090C PID = 1000
Device Revision: 1100
Chip Vendor: SMI(??)
Chip Part-Number: SM321~SM325
2gb pen drive
hi Ashraf Mansour
I have kingston 512 GB pendrive.BUt now it is in raw file system.I can not formet it.what should i do?
Description: [I:]USB Mass Storage Device(ChipsBnk Flash Disk)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 1E3D PID = 095C
Device Revision: 0100
Manufacturer: ChipsBnk
Product Model: Flash Disk
Product Revision: 5.00
Chip Vendor: ChipsBank
Chip Part-Number: CBM2096/CBM2096P - [2010-06-01B]
Flash ID Code: ADDE94D2 - Hynix - 1CE/Single Channel [MLC-8K] -> Total Capacity = 8GB
Tools on web: http://dl.mydigit.net/special/up/chipsbank.html
I tried to fix a 4GB kingston usb flash drive. However when I am trying to flash the controller with the USB MASS PRODUCTION UTILITY I get an error 61: Download failed
This is the solution for flash details
Description: USB Mass Storage Device
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 090C PID = 1000
Device Revision: 1100
Chip Vendor: SMI(??)
Chip Part-Number: SM321~SM325
2gb pen drive
Try using this software and tell me the result
http://www.mediafire.com/?ksrhe94nnj0x2t1
For the flash info
hi Ashraf Mansour
I have kingston 512 GB pendrive.BUt now it is in raw file system.I can not formet it.what should i do?
Description: [I:]USB Mass Storage Device(ChipsBnk Flash Disk)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 1E3D PID = 095C
Device Revision: 0100
Manufacturer: ChipsBnk
Product Model: Flash Disk
Product Revision: 5.00
Chip Vendor: ChipsBank
Chip Part-Number: CBM2096/CBM2096P - [2010-06-01B]
Flash ID Code: ADDE94D2 - Hynix - 1CE/Single Channel [MLC-8K] -> Total Capacity = 8GB
R u sure your flash is 512 GB or 8 GB??
Hello MR Kechristodoulos , please give me chip genius report about ur flash , then i will find your software
Here is the chip genious report Mr. Ashraaf:
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: Full Speed
Max Current: 100mA
USB Device ID: VID = 0C76 PID = 0005
Device Vendor: GENERIC
Device Name: USB Mass Storage
Device Revision: 0100
Manufacturer: GENERIC
Product Model: USB Mass Storage
Product Revision: 1.00
Chip Vendor: Solid State Systems
Chip Part-Number: SSS6691-B3
Hello Mr Kechristodoulos
Try this software and tell me the result
http://www.mediafire.com/?080zz340lvzzdmz
I tried the software and gave me an error with this report file:
Starting Time: 21:03:20
Device 1:0xB3
MP Version:2.162
INI_File_Name:
Random delay 0 msec
--- Download MP ISP ---
### Error: Download MP ISP ###
Ending Time: 21:03:24
I have also noticed that card info indicate: No support chip!..
Hello Mr Kechrist try this software and tell me the result
http://www.mediafire.com/?33989koizp3uut8
Well, it failed again with error code 61 which is according to the software MP ISP code install fail. However there is a .pdf that tells something about setting up an .iso file. i didn'd understand actually what does this mean..
dear mr ashraf
i have strontium 4 gb memory card with following specifications
Description: [H:]USB Mass Storage Device(Generic Mass-Storage)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 500mA
USB Device ID: VID = 1908 PID = 0225
Serial Number: 20120218120009
Device Vendor: Generic
Device Name: USB2.0 Device
Device Revision: 0109
Manufacturer: Generic
Product Model: Mass-Storage
Product Revision: 1.09
Chip Part-Number: Unknown
kindly do something for this as it is not available on this page.
thank you
Hello Ashraf...Iam Muhannad...I haven;y find boot program for my flash at flashboot...these are the information:
Protocal Version: USB 1.10
Current Speed: Full Speed
Max Current: 100mA
USB Device ID: VID = 2001 PID = 2008
Device Vendor: Ipgoal
Device Name: USB2.0 FlashDisk
Device Revision: 1000
Manufacturer: Generic
Product Model: Flash Disk 2.0
Product Revision: 2.20
Chip Vendor: Micov
Chip Part-Number: MXT6208E
Mr prince , please insert your usb flash drive to another pc and give me chip genius report
Mr Muhanad what is the capacity of your flash drive ? 4GB or >>?
Hi Mr. Ashraaf I'm fouad
Here is the chip genious report
Description: [E:]Périphérique de stockage de masse USB(Generic Flash Disk 2.0)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 5136 PID = 4678
Device Vendor: Generic
Device Name: USB2.0 FlashDisk
Device Revision: 1000
Manufacturer: Generic
Product Model: Flash Disk 2.0
Product Revision: 2.40
Chip Vendor: Micov
Chip Part-Number: MXT6208E/MW8209 - F/W 47.2.8.8
Tools on web: http://dl.mydigit.net/special/up/micov.html
Thx
Could you please help me fix my flash player? I can't find the exact specifications for it on the website flashboot.ru. This is the chip genius report:
Description: [G:]USB Mass Storage Device(Generic Flash Disk)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 058F PID = 6387
Serial Number: 405C71B6
Device Vendor: Generic
Device Name: Mass Storage
Device Revision: 0103
Manufacturer: Generic
Product Model: Flash Disk
Product Revision: 8.07
Chip Vendor: Alcor Micro
Chip Part-Number: SC708(FC8708)/AU6987/AU6990 - F/W E403
Flash ID Code: 98D79432 - Toshiba - 1CE/Single Channel [MLC-8K] -> Total Capacity = 4GB
Tools on web: http://dl.mydigit.net/special/up/alcor.html
Thank you!
Software for the flash info
Hi Mr. Ashraaf I'm fouad
Here is the chip genious report
Description: [E:]Périphérique de stockage de masse USB(Generic Flash Disk 2.0)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 5136 PID = 4678
Device Vendor: Generic
Device Name: USB2.0 FlashDisk
Device Revision: 1000
Manufacturer: Generic
Product Model: Flash Disk 2.0
Product Revision: 2.40
Chip Vendor: Micov
Chip Part-Number: MXT6208E/MW8209 - F/W 47.2.8.8
Tools on web: http://dl.mydigit.net/special/up/micov.html
Thx
Use this software and tell me the result please
http://www.mediafire.com/?b9fwdc47sqwndf7
I'm waiting your reply
Thank you
Hello Mr turtle7 try to use this software
http://www.mediafire.com/?xdgglkv6ggf8av0
Please tell me the result , if this software don't work well , please type your flash brand and size
Hi! What can I use for my flash drive?
here are the info from chipgenius:
Description: [G:]USB Mass Storage Device(Kingston DT 101 G2)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 0951 PID = 1642
Serial Number: 001CC0EC34A2BB11D709011D
Device Vendor: Kingston
Device Name: DT 101 G2
Device Revision: 0100
Manufacturer: Kingston
Product Model: DT 101 G2
Product Revision: PMAP
Chip Vendor: Phison
Chip Part-Number: PS2251-50(PS2250) - F/W 03.01.10 [2010-04-20]
Flash ID Code: 8988244B - Intel [MLC-8K]
For this flash
Hi! What can I use for my flash drive?
here are the info from chipgenius:
Description: [G:]USB Mass Storage Device(Kingston DT 101 G2)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 0951 PID = 1642
Serial Number: 001CC0EC34A2BB11D709011D
Device Vendor: Kingston
Device Name: DT 101 G2
Device Revision: 0100
Manufacturer: Kingston
Product Model: DT 101 G2
Product Revision: PMAP
Chip Vendor: Phison
Chip Part-Number: PS2251-50(PS2250) - F/W 03.01.10 [2010-04-20]
Flash ID Code: 8988244B - Intel [MLC-8K]
use the following software and tell me the result please
http://www.mediafire.com/?c53u8bh19w5ugd9
hello sir i insert the flash drive in other PC
and results to:
Device Name: +[E:]+USB Mass Storage Device(USB MEMORY BAR USB Device)
PnP Device ID: VID = 090C PID = 3000
Serial Number: 5&&8639F5&&0&&8
Revision: 1000
Device Type: Standard USB device -
Chip Vendor: SMI
Chip Part-Number: SM32X
Product Vendor: (N/A)
Product Model: (N/A)
Tools on Web: http://dl.mydigit.net/special/up/smi.html
my flash drive is kingmax PD-71 8gb
I try the program in http://www.mediafire.com/?yyea256vcd848cl
but it said Disk recovery wizard not find kingmax U-Drive/PD-07
I also try it to other PC and laptops but same result
my "kingmax model is PD-71" i think it is not compatible,,please help me sir what else can i do?
Software for the flash info
Hi Mr. Ashraaf I'm fouad
Here is the chip genious report
Description: [E:]Périphérique de stockage de masse USB(Generic Flash Disk 2.0)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 5136 PID = 4678
Device Vendor: Generic
Device Name: USB2.0 FlashDisk
Device Revision: 1000
Manufacturer: Generic
Product Model: Flash Disk 2.0
Product Revision: 2.40
Chip Vendor: Micov
Chip Part-Number: MXT6208E/MW8209 - F/W 47.2.8.8
Tools on web: http://dl.mydigit.net/special/up/micov.html
Thx
Use this software and tell me the result please
http://www.mediafire.com/?b9fwdc47sqwndf7
I'm waiting your reply
Thank you
thx for your reply i tried it not work
my chip info are
MW8209
IPM122541-1
09HT0515
thx
Hi
I need your help with my USB Key. I can't format it. It's telling me write protected and RAW.
I get following information from my key:
Description: [H:]Dispositif de stockage de masse USB(USB DISK 3.0)
Device Type: Mass Storage Device
Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
Current Speed: High Speed
Max Current: 300mA
USB Device ID: VID = 13FE PID = 5200
Serial Number: 07072C7675A54322
Device Vendor: Phison
Device Name: USB DISK 53X
Device Revision: 0110
Product Model: USB DISK 3.0
Product Revision: PMAP
Controller Part-Number: Unknown
===================================================
Volume: H:
Controller: Unknown
Possible Memory Chip(s): Not available
VID: 13FE
PID: 5200
Manufacturer: Phison
Product: USB DISK 53X
Query Vendor ID:
Query Product ID: USB DISK 3.0
Query Product Revision: PMAP
Physical Disk Capacity: 31009800192 Bytes
Windows Disk Capacity: 0 Bytes
Internal Tags: AD2B-AAA3
USB Version: 3.00 in 2.00 port
Max. Power: 300 mA
ContMeas ID: 5086-01-00
Microsoft Windows 8 x64
------------------------------------
http://www.antspec.com/usbflashinfo/
Program Version: 7.5.0.480
best regards
Tra
use this software
http://www.mediafire.com/download/2a9mhs2t38f3r0i/Phison_MPALL_v3.08.rar
Hi Ashraaf
Thanks for your fast help.
I downloaded v3.08 but I don't get to show up VID = 13FE PID = 5200.
It seems not working but I'm really not a specialist.
best regards
Tra
Hello,
can you help me with my usb flash drive.I dont find the boot program for my flash drive, below you can find information from my key :
USB Device ID: VID = 1B1C PID = 1A01
Serial Number: 12206024000015870004
Device Vendor: Corsair
Device Name: Voyager GT 3.0
Device Revision: 0000
Manufacturer: Corsair
Product Model: Voyager GT 3.0
Product Revision: 1.00
Chip Part-Number: Unknown
Thanks for your help.
hi Ashraf Mansour,
i have 32gb transcend JF V60
chipgenius says:
Description: [K:]USB Yığın Depolama Aygıtı(Generic USB Flash Disk)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 058F PID = 1234
Device Vendor: Alcor Micro
Device Name: Mass Storage Device
Device Revision: 0001
Manufacturer: Generic
Product Model: USB Flash Disk
Product Revision: 7.76
Chip Vendor: Alcor Micro
Chip Part-Number: AU6984 - F/W 66F0
Flash ID Code: ECD755B6 - Samsung - 4CE/Dual Channel [MLC-4K] -> Total Capacity = 32GB
Tools on web: http://dl.mydigit.net/special/up/alcor.html
i downloaded this: AlcorMP_AU698x_RT_v1.0.0.14_L0117
but winrar diagnostic messages say unknown in the method. i mean damaged archives i cant open it. is it wrong? im using vista SP2 pls help me
For this flash
Device Vendor: Corsair
Device Name: Voyager GT 3.0
Use this way
, try to format your drive by opening the command prompt (Start/Run/type “CMD”) and typing "Format X: /FS:FAT32 /U" (X = the drive letter assigned to the Flash Voyager). Please note that this will erase all data on the drive, so make sure that you select the correct drive. If this still doesn’t work, we’ll have to replace the device for you.
Hello MR GUVEN KAYNAK For this flash
use this software
http://www.mediafire.com/?70lw2v0c6sv81i5
please tell me the result
help pls
Description: [H:]USB Mass Storage Device(USB2.0 (FS) FLASH DISK)
Device Type: Mass Storage Device
Protocal Version: USB 1.10
Current Speed: Full Speed
Max Current: 100mA
USB Device ID: VID = 10D6 PID = 1100
Serial Number: USB_2.0(FS)_FLASH_DISK_
Device Name: USB 2.0(FS) FLASH DISK
Device Revision: 0100
Manufacturer: USB2.0
Product Model: (FS) FLASH DISK
Product Revision: 1.00
Chip Vendor: Actions(??)
Chip Part-Number: ATJ2085/ATJ2051
hi,i also have a problem with my flash drive.
mr. ashraaf muhammed, can you help me to determine my flash id?
this is my flash drive info.
thanks ahead.
Volume: I:
Controller: SanDisk
Possible Memory Chip(s): Not available
VID: 0781
PID: 5530
Manufacturer: SanDisk Corporation
Product: Firebird6Up9
Query Vendor ID: SanDisk
Query Product ID: Firebird
Query Product Revision: 1.05
Physical Disk Capacity: 67108864 Bytes
Windows Disk Capacity: 0 Bytes
Internal Tags: BY2B-AABJ
USB Version: 2.00
Max. Power: 200 mA
ContMeas ID: 373D-01-00
Microsoft Windows 7 SP1 x64
------------------------------------
http://www.antspec.com/usbflashinfo/
Program Version: 7.5.0.480
Hello mr .... Is this Mp3
help pls
Description: [H:]USB Mass Storage Device(USB2.0 (FS) FLASH DISK)
Device Type: Mass Storage Device
Protocal Version: USB 1.10
Current Speed: Full Speed
Max Current: 100mA
USB Device ID: VID = 10D6 PID = 1100
Serial Number: USB_2.0(FS)_FLASH_DISK_
Device Name: USB 2.0(FS) FLASH DISK
Device Revision: 0100
Manufacturer: USB2.0
Product Model: (FS) FLASH DISK
Product Revision: 1.00
Chip Vendor: Actions(??)
Chip Part-Number: ATJ2085/ATJ2051
yes ashraaf its a mp3 and a radio
OK Mr .... you know that I'm specialist in usb flash drive , but i will try to fix your problem but not now may be tomorrow because i have to sleep now , i have work early .Please bookmark this page and be in touch with it , i will but a solution for u but tomorrow . Thank you
ok thank you have a good night..
Hello Mr aldrin lopez try using this software and tell me the result
http://www.mediafire.com/download/xcurg748ls13s93/HP_USB_Disk_Storage_Format_Tool_v2.0.6.rar
you too mr Anonymous
mr. ashraaf muhammed , i used quick format using fat and the two other file system to format but i end up with this error "failed to format the device".
(i have no idea how to use the format option "create a DOS startup disk")..
hello mr aldrin lopez do u use the software that i tell u to use it ??
ok try to format it with dos with the following steps
try to format your drive by opening the command prompt (Start/Run/type “CMD”) and typing "Format X: /FS:FAT32 /U" (X = the drive letter assigned to the Flash
السلام عليكم
انا مش عارف اقولك ايه على مجهودك ده
ربنا يجعله في ميزان حسناتك
دي البيانات من البرنامج
Device Name: ?[H:]?USB Mass Storage Device(Kingston DT 101 G2 USB Device)
PnP Device ID: VID = 0951 PID = 1642
Serial Number: 001CC0EC34CABC40263D027E
Revision: PMAP
Device Type: Standard USB device - USB2.0 High-Speed
Chip Vendor: phison
Chip Part-Number: PS2250
Product Vendor: (N/A)
Product Model: (N/A)
انا الشمكله عندي اني بحط الفلاشه تظهر وتختفي ومبتقفش خالص
بتفضل كده لحد ماشيلها
وبعدين مش مديه مساحه
وطبعا مافيش فورمات ولا اي تحكم فيه
yes, i used the software that you require.
mr. ashraaf muhammed, i follow your instruction using the command promt but still can't format it.
in the end it shows me, "invalid media or track 0 bad - disk unusable", sir.
assalamualaikum Mr Ashraaf, i need ur help to flash my Kingston DataTraveler 2Gb USB Device. Since the 1st time i plug it to my laptop, it cannot readable/format. Also the size in My Computer, only 0bytes. I don't know which tools to use from Micov. Need ur advice & help. Thx.
Matt.
Description: [I:]USB Mass Storage Device(Generic Flash Disk 2.0)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 5136 PID = 4678
Device Vendor: Generic
Device Name: USB2.0 FlashDisk
Device Revision: 1000
Manufacturer: Generic
Product Model: Flash Disk 2.0
Product Revision: 2.60
Chip Vendor: Micov
Chip Part-Number: MXT6208E/MW8209 - F/W NO ISP
Tools on web: http://dl.mydigit.net/special/up/micov.html
السلام عليكم Josh 4 Justice
تحتاج الى عمل شورت على اى سى الفلاش عند توصيل الفلاش الى الكمبيوتر
شاهد الصوره التاليه
http://img3.imageshack.us/img3/327/52448680.jpg
اولا قم بفك الفلاشه وشاهد الصوره . احضر ابره رفيعه جدا او مشبك الورق الرفيع جدا ثم قم بعمل شورت كما فى الصوره ..لاحظ الشورت يتم عمله وانت مركب الفلاشه فى الجهاز .. بعد متعمل شورت هتلاقى الجهاز عرف الفلاشه لوحده .. شغل برنام الشيب جينيس وهاتلى تقرير الفلاشه
hi mr ashraaf muhammed
my chip info are
MW8209
IPM122541-1
09HT0515
can you help me
thx
انا عملت الللي في الثورة وظهرلي في البرنامج
Device Name: ?[H:]?USB Mass Storage Device(2261 PRAM USB Device)
PnP Device ID: VID = 13FE PID = 3E00
Serial Number: 5&&21E739F&&0&&1
Revision: 1.00
Device Type: Standard USB device - USB2.0 High-Speed
Chip Vendor: phison
Chip Part-Number: unknown
Product Vendor: 2261
Product Model: PRAM
بس فيه سؤال !!
هو ليه و ازاي البيانات دي اتغيرت من المره الاولى للمره دي ؟
استاذ / Josh 4 Justice
استخدم هذا البرنامج لاصلاح فلاشتك
وياريت تقولى النتيجه وتتابع معايا لحد مت فلاشتك تتصلح
البرنامج اهو
http://www.mediafire.com/download/ap1s9vx9imv831q/Phison_PS2261_UP21_CTool_90AP_v1.12.7z
for this flash
hi mr ashraaf muhammed
my chip info are
MW8209
IPM122541-1
09HT0515
can you help me
thx
use any pro of this software and tell me which one fix ur flash because all is concerned with MW8209
http://www.mediafire.com/?2f13jmgqjhudi87
التشيب نفسها مكتوب عليها
Phison
ps2251-61-5
ue1202c
التشيب الكبيره
TOSHIBA 0e7753
China 1205 9 A E
TC58NVG6D2GTA00
طيب الفلاشه بتاعتك كام جيجا ؟؟؟ هى 8 جيجا ؟؟ وبعدين هل جربت البرنامج اللى بعتهولك ؟؟؟ وادالك ايه ؟؟
قبل ما تبعتلي البرنامج ده جربت واحد قبليه
و الظاهر اني جيت اكحلها .. عميتها
المهم انها دلوقتي مش عارف اعملها شورت
والفلاشه 16 جيجا
any solution 4 me??
Mr Anonymous where is ur flash report ?
Mr anonymous please write ur name
this is the solution of ur flash
for this flash
hi mr ashraaf muhammed
my chip info are
MW8209
IPM122541-1
09HT0515
can you help me
thx
use any pro of this software and tell me which one fix ur flash because all is concerned with MW8209
http://www.mediafire.com/?2f13jmgqjhudi87
استاذ / Josh 4 Justice
اوصفلى الوضع دلوقتى عندك .. الفلاشه مبقتش تتعرف ف الجهاز ؟؟ ولا ايه دلوقتى
دلوقتي مافيش اي استجابه
غيرت مكانها ومش فارقه
طيب افتح الشيب جينيس وشوفها متعرفه جوا ولا لا ؟
لا مش شايفها
كانت ساعات بتجيب
unrecogized
لكن دلوقتي مافيش مافيش اي استجابه
اولع فيها ؟
:)
جرب على جهاز تانى وقولى
اممممم
اوك
هجرب و ارد عليك في اقرب فرصه
ومتشكر ليك جدا لإهتمامك
تحت امرك استاذ / Josh 4 Justice
thx mr ashraaf my name is fouad
i reply you later after traing ameco soft
thx for your help
Description: USB Mass Storage Device(USB2.0 (FS) FLASH DISK)
Protocal Version: USB 1.10
Current Speed: Full Speed
USB Device ID: VID = 10D6 PID = 1100
Device Revision: 0100
Manufacturer: USB2.0
Product Model: (FS) FLASH DISK
Product Revision: 1.00
Chip Vendor: Actions(??)
Chip Part-Number: ATJ2085/ATJ2051
its a mp3
mr keen i'm not deal with mp3 software , only flash drive software >
mr foud please tell me , this software work with u well or not ?
mine says: Description: [G:]USB Mass Storage Device(GENERIC USB Mass Storage)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 0C76 PID = 0005
Device Vendor: GENERIC
Device Name: USB Mass Storage
Device Revision: 0100
Manufacturer: GENERIC
Product Model: USB Mass Storage
Product Revision: 1.00
Chip Vendor: Solid State Systems
Chip Part-Number: SSS6677-A7
but it doesnt find 2gb on iflash / flashboot.ru
Hello mr brandon try this software and tell me the result please
http://www.mediafire.com/?o2ribb826et38yd
Device Name: +[Z:]+USB Mass Storage Device(XXXXXXXX U167CONTROLLER USB Device)
PnP Device ID: VID = 048D PID = 1167
Serial Number: 5&&A713703&&0&&4
Revision: 0.00
Device Type: Standard USB device - USB2.0 High-Speed
Chip Vendor: ITE
Chip Part-Number: IT1167
Product Vendor: (N/A)
Product Model: (N/A)
Tools on Web: http://bbs.mydigit.cn/read.php?tid=148892
Mr firoz try this software
http://www.mediafire.com/?njqqeal5unhmx47
and tell me the result
Description: [D:]USB Mass Storage Device(Generic USB Flash Disk)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 058F PID = 1234
Device Vendor: Alcor Micro
Device Name: Mass Storage Device
Device Revision: 0001
Manufacturer: Generic
Product Model: USB Flash Disk
Product Revision: 7.76
Chip Vendor: Alcor Micro
Chip Part-Number: AU6983/AU6986 - F/W A13F
Flash ID Code: 2CD7943E - Micron - 1CE/Single Channel [MLC-4K] -> Total Capacity = 4GB
Tools on web: http://dl.mydigit.net/special/up/alcor.html
----Preet
Hello Preet try to use this software ,insert your flash to ur computer , open the software , determine your flash capacity 4GB or 8GB then begin update your flash firmware
please tell me the result
http://www.mediafire.com/?no7x776u256p0hd
Got an error:
Cannot connect to the Transcend server.
Please check your Internet connection.
Hello preet , you must be connected to the internet to use this software
Yes, connected to a working connection..
dude you save a lot of usb , THANK YOU
mine is 1gb datatravler how to fix it ?
Description: [G:]USB Mass Storage Device(Kingston DataTraveler 2.0)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 13FE PID = 1D00
Serial Number: 5B7419AF0934
Device Vendor: Kingston
Device Name: DataTraveler 2.0
Device Revision: 0100
Manufacturer: Kingston
Product Model: DataTraveler 2.0
Product Revision: PMAP
Chip Vendor: Phison
Chip Part-Number: PS2251-56(PS2156) - F/W 02.00.10 [2006-09-05]
Flash ID Code: ECD31425 - Samsung [MLC-2K]
Tools on web: http://dl.mydigit.net/special/up/phison.html
these are the information I get thru chipgenius and h2testw progs:Description: [K:]Periferica di archiviazione di massa USB(Generic Flash Disk)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 0000 PID = 7777
Serial Number: 708D3DCC
Device Vendor: Generic
Device Name: Mass Storage
Device Revision: 0102
Manufacturer: Generic
Product Model: Flash Disk
Product Revision: 8.00
Chip Vendor: Alcor Micro
Chip Part-Number: Unknown(??) - 0xE802 - F/W F508
Flash ID Code: 8988244B - Intel - 2CE/Single Channel [MLC-8K] -> Total Capacity = 16GB
Reference Product: U
Tools on web: http://dl.mydigit.net/special/up/alcor.html
---------------------
The media is defective.
11.7 GByte OK (24657952 sectors)
50.7 GByte DATA LOST (106381280 sectors)
Details:0 KByte overwritten (0 sectors)
0 KByte slightly changed (< 8 bit/sector, 0 sectors)
50.7 GByte corrupted (106381280 sectors)
0 KByte aliased memory (0 sectors)
First error at offset: 0x00000002f0804000
Expected: 0x00000002f0804000
Found: 0x0000000000000000
H2testw version 1.3
Writing speed: 15.5 MByte/s
Reading speed: 11.5 MByte/s
H2testw v1.4
but I cannot find a reconery prog suitable for this case
thks
You are welcome mr brandon gesterkamp
For your flash Mr brandon try this software and tell me the result
http://www.mediafire.com/?p3e7w92mk87s6m8
Software of this flash
try to use the software in this article
http://www.flashdrive-repair.com/2013/05/repair-transcend-flash-online-alcor-micro-AU6983-AU6986.html
and tell me the result please
these are the information I get thru chipgenius and h2testw progs:Description: [K:]Periferica di archiviazione di massa USB(Generic Flash Disk)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 0000 PID = 7777
Serial Number: 708D3DCC
Device Vendor: Generic
Device Name: Mass Storage
Device Revision: 0102
Manufacturer: Generic
Product Model: Flash Disk
Product Revision: 8.00
Chip Vendor: Alcor Micro
Chip Part-Number: Unknown(??) - 0xE802 - F/W F508
Flash ID Code: 8988244B - Intel - 2CE/Single Channel [MLC-8K] -> Total Capacity = 16GB
Reference Product: U
Tools on web: http://dl.mydigit.net/special/up/alcor.html
---------------------
The media is defective.
11.7 GByte OK (24657952 sectors)
50.7 GByte DATA LOST (106381280 sectors)
Details:0 KByte overwritten (0 sectors)
0 KByte slightly changed (< 8 bit/sector, 0 sectors)
50.7 GByte corrupted (106381280 sectors)
0 KByte aliased memory (0 sectors)
First error at offset: 0x00000002f0804000
Expected: 0x00000002f0804000
Found: 0x0000000000000000
H2testw version 1.3
Writing speed: 15.5 MByte/s
Reading speed: 11.5 MByte/s
H2testw v1.4
but I cannot find a reconery prog suitable for this case
thks
Description: [I:]USB Mass Storage Device(SanDisk Cruzer Switch)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 0781 PID = 5572
Serial Number: 4C532000061210109424
Device Vendor: SanDisk
Device Name: Firebird USB Flash Drive
Device Revision: 0126
Manufacturer: SanDisk
Product Model: Cruzer Switch
Product Revision: 1.26
Chip Part-Number: Unknown
What should I do to repair it
Hello Mr brandon gesterkamp
use this software
http://www.mediafire.com/?y6ciaxca2nc4b3a
PnP Device ID: VID = 0781 PID = 5567
Serial Number: 2003420130029D7395A9
Revision: 1.01
Device Type: Standard USB device - USB2.0 High-Speed
Chip Vendor: (No match record)
Chip Part-Number: (No match record)
Product Vendor: SanDisk
Product Model: Cruzer Blade
Tools on Web: (N/A)
2GB
Hello Mr anonymous your chip report doesn't show Chip Vendor: (No match record)
Chip Part-Number .
please can you get the flash report but from another pc
hi mr ashraaf muhammed i'm ramy
my flash info are
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 058F PID = 6387
Serial Number: 9DCF177F
Device Vendor: Generic
Device Name: Mass Storage
Device Revision: 0103
Manufacturer: Generic
Product Model: Flash Disk
Product Revision: 8.07
Chip Vendor: Alcor Micro
Chip Part-Number: Unknown(??) - 0xCD03 - F/W 9288
Flash ID Code: 454A9AB2 - SanDisk - 1CE/Single Channel [TLC-8K] -> Total Capacity = 16GB
Tools on web: http://dl.mydigit.net/special/up/alcor.html
how do i repair it
Hi, there is some problem with my flash, it doesnt show up anymore in My computer, but in device manager and your chip genius it shows up... any ideas?
Description: [H:]USB Mass Storage Device(ADATA NAND Flash)
Device Type:??Mass Storage Device
Protocal Version: USB 2.10 <- Hint: This is a USB3.0 device working at USB2.0 mode
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 125F PID = 312B
Serial Number: 000000000000000105
Device Vendor: ADATA
Device Name: ADATA USB Flash Drive
Device Revision: 0100
Manufacturer: ADATA
Product Model: NAND Flash
Product Revision: 1.00
Chip Part-Number: Unknown
Hello John ,try the software in this subject
http://www.flashdrive-repair.com/2013/04/a-data-usb-flash-disk-format-tool-and.html
Hello Mr ramy please try to get your flash info from another pc
Well, when I try to format, it shows that there is no USB flash disk attached, but its in slot, and it`s shown in device manager... also found by ChipGenius...
John can you try to format it with the previous pro but in another pc and tell me the result
please help me...
Description: [F:]USB Mass Storage Device(GENERIC USB Mass Storage)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 0930 PID = 6544
Serial Number: 001CC0C60D83CC81032A23A5
Device Vendor: TOSHIBA
Device Name: TransMemory
Device Revision: 0100
Manufacturer: GENERIC
Product Model: USB Mass Storage
Product Revision: 1.00
Chip Vendor: Solid State Systems
Chip Part-Number: TC58NC669x/SSS6686-B6
Salam Aleikum, Aleikum Salam
Hello Mr. Ashraaf Muhammed I´ve been reading your post and i think it is very helpful and all well explained, thats why i wonder if i can get your help with a
Kingston DT101 G2 8GB SSS6697
vid 0951 pid 1642
Chip Vendor: (No match record)
Chip Part-Number: (No match record)
i cant find SSS6697 firmware on the net, what can i do , or should i throw it
Best regards FRom Cuba Igor
igorpresent@yahoo.com
Hello Mr. Ashraf
I have a problem with my flash..
when i input my flash in the computer, it appears in my computer, but when i try to open it it says that 'the disk in drive F is not formatted, do you want to format'. i think that there is an error in it, and i really don't want to format because i have very important folders, how can i fix this problem.
My flash is Toshiba 8GB. please help me recover it.
Thank you
For SSS6697 firmware try to use the software used in this article
http://www.flashdrive-repair.com/2013/05/download-kingston-format-tool-online.html
and tell me the result
Hello Mr ....
My flash is Toshiba 8GB. please help me recover it.
try to go to recovery center in your town .or you can try this software in this section but i can't promise you , be careful
http://www.flashdrive-repair.com/search/label/Recovery
Hello Mr alam_raya99
try to use the software in this article
http://www.flashdrive-repair.com/2012/12/how-can-you-fix-transcend-or-jet-flash.html
Thank You Mr. Ashraf for your help, your a great help for so many people around the web, I will try your suggestion and take it to a recovery center asap.
Mr. 8GB Toshiba...
For SSS6697 firmware try to use the software used in this article
http://www.flashdrive-repair.com/2013/05/download-kingston-format-tool-online.html
and tell me the result
Here it is:
after several attempts with
Kingston Format Utility.exe
always says after 50% of process: format fail
i´ve been trying with others low level format tools in the past and always the same result, i think is a firmware issue
any suggestions?
Yes Try to use the software in this article
http://www.flashdrive-repair.com/2013/06/Format-flash-stick-with-Urescue-2013-format-tool.html
and tell me the result please and don't give up quickly
Yes Try to use the software in this article
http://www.flashdrive-repair.com/2013/06/Format-flash-stick-with-Urescue-2013-format-tool.html
and tell me the result please and don't give up quickly
Here it is:
i tried Urescue 2013 format tool
with the
Kingston DT101 G2 8GB SSS6697
and also a transcend jetflash 8GB and sandisk 8GB all bads
and always i saw:
program is running, please wait
and later a window alert:
device not found,please insert device
hello, tried with that program to format flash from another pc. same problem...
For transcend jetflash , use software in this article
http://www.flashdrive-repair.com/2012/12/how-can-you-fix-transcend-or-jet-flash.html
Boa noite...meu Cruzer blade ta protegido contra gravação , nao consigo fazer nada nele, mas ele abre...como devo fazer?
rotocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 0781 PID = 5567
Serial Number: 20053146830EBFC0CF86
Device Vendor: SanDisk
Device Name: Cruzer Blade
Device Revision: 0126
Manufacturer: SanDisk
Product Model: Cruzer Blade
Product Revision: 1.26
Chip Part-Number: Unknown
I read is possible delete partition of usb flash bias windows installer cd? is that right?
Igor
Hello Igor , I can't understand what you mean ??
delete partition from usb drive partitions or HDD partitions or what ??
Hello Mr Rafael Mello , try the software in this article
http://www.flashdrive-repair.com/2013/05/Sandisk-compatible-U3-smart-drive-recovery-online.html
or here
http://www.flashdrive-repair.com/2013/03/repair-sandisk-flash-drive-and-oti-with.html
and tell me the result please
I read, with the flash plugged and recognized by bios, start windows installation, in the option of choice unit to install, choose the flash and with L key delete partition
Igor
Mr Igor please read this article
http://www.flashdrive-repair.com/2012/12/how-to-install-multi-boot-windows-from.html
or
http://www.flashdrive-repair.com/2013/04/3-steps-to-make-usb-flash-drive.html
hello ashraaf can you help me. my pc doesnt recognise. it says please insert a device into drive d.
Device Description: [D:] USB Mass Storage Device (Generic USB Flash Disk)
Device Type: Mass Storage Device
Protocol version: USB 2.00
Current Speed: High-speed (HighSpeed)
Power Consumption: 100mA
USB Device ID: VID = 058F PID = 1234
Equipment suppliers: Alcor Micro
Device Name: Mass Storage Device
Device Revision: 0001
Manufacturer: Generic
Product Type: USB Flash Disk
Product Revision: 7.76
Chip manufacturers: Alcor Micro (Yasukuni)
Chip Model: SC708 (FC8708) / AU6987/AU6990 - F / W 4120
Online information: http://dl.mydigit.net/special/up/alcor.html
Hello Mr Neelkanth Govindji try to use this software
http://www.4shared.com/file/XbpMV0Qb/fc_mptool_fc8308_fc8508_fc8406.html
and click on the file named AlcorMp
and tell me the result please
Description: [P:]Urządzenie pamięci masowej USB(2250 PRAM)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 50mA
USB Device ID: VID = 13FE PID = 3100
Device Name: 2250 PRAM
Device Revision: 0110
Product Model: 2250 PRAM
Product Revision: 1.00
Chip Vendor: Phison
Chip Part-Number: PS2251-50(PS2250) - F/W 03.04.10 [2009-11-12]
Flash ID Code: ADD7949A - Hynix [MLC-8K]
Try this software and tell me the result
http://www.mediafire.com/?yqc7yomm3a3rlno
sanjeev kalra
victor120277@gmail.com
hello ashraaf plaese help....
this disk says write protected and i cannot solve till now......
here is chipgenius info
Description: [S:]USB Mass Storage Device(Generic Flash Disk)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 0001 PID = 7778
Serial Number: 9CFD35FD
Device Vendor: Generic
Device Name: Mass Storage
Device Revision: 0104
Manufacturer: Generic
Product Model: Flash Disk
Product Revision: 8.00
Chip Vendor: Alcor Micro
Chip Part-Number: AU6983/AU6986 - F/W EF57
Flash ID Code: ECD314A5 - Samsung - 1CE/Single Channel [MLC-4K] -> Total Capacity = 1GB
Reference Product: ??:?U????????
Tools on web: http://dl.mydigit.net/special/up/alcor.html
please help need a tool to help recover my usb drive
MEMORY BAR)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 090C PID = 3000
Device Vendor: Silicon Motion,Inc.
Device Name: SM321BB MEMORY BAR
Device Revision: 0100
Product Model: USB MEMORY BAR
Product Revision: 1000
Chip Vendor: SMI
Chip Part-Number: SM321BB - ISP NONE
Flash ID Code: 3F3F3F3F - 4CE/Single Channel [QLC]
hi i'm ramy the probleme with my flasdisk is write protected
Hello Marlon try to use this software
http://www.mediafire.com/?wmcbpsqn5db1ern
and tell me the result
Hello Mr Victor Kal i send to you the software of your flash in a message check it
hello, i didnt quite understand but i tried the software. do i need to be connected to the internet for this or what. i tried it but no result
and also can you add me in your gmail account so that we can chat online it would be much better(can be solved easily) neelkanthgovindji@gmail.com and also tell me the time when you are online
OK i add you there
sorry can you add me on facebook as my gmail is problematic right now, its ok if you are not free.
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 5678 PID = 1234
Serial Number: CCBB1203081505172194929608
Device Vendor: Generic
Device Name: Flash Disk
Device Revision: 0100
Manufacturer: Generic
Product Model: Flash Disk
Product Revision: 5.00
Chip Vendor: ChipsBank
Chip Part-Number: CBM2096/CBM2096P - [2010-06-01]
Flash ID Code: 98D394BA - Toshiba - 1CE/Single Channel [MLC-4K] -> Total Capacity = 1GB
can you help find it.?
i'm needed..
please...
Hello Mr Bonifasius Newversion , for your flash drive , try to use this software
http://www.mediafire.com/download/dbqn2ewqqw3dwck/UMPToolV5537_M71M%282012-03-09%29.rar
and please tell me the result
hello selam ashraaf muhammed help me please thnks
Name: Mass Storage Device (USB2.0)
Logic Driver: M:\
VID&PID: Vid_14cd&Pid_125c
Speed: high speed
VendorID: Mass
ProductID: Storage Device
Product Revision:
Vendor Description: Generic
Product Description: Mass Storage Device
Serial Number: 125C20100726
give me full chip genius report for your flash drive
please help i dont know which icon to click to download
Description: [N:]USB Mass Storage Device(Kingston DT 101 II)
Protocal Version: USB 2.00
Current Speed: High Speed
USB Device ID: VID = 0951 PID = 1625
Device Revision: 0110
Manufacturer: Kingston
Product Model: DT 101 II
Product Revision: PMAP
Chip Part-Number: Unknown
Tools on web: http://dl.mydigit.net/special/up/phison.html
hello selam Ashraaf Muhammed help me please very thnks
This MicroSD Card
ChipGenius 4.0 report
Description: [M:]USB Mass Storage Device(Mass Storage Device)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 248mA
USB Device ID: VID = 14CD PID = 125C
Serial Number: 125C20100726
Device Vendor: Generic
Device Name: Mass Storage Device
Device Revision: 0300
Manufacturer: Mass
Product Model: Storage Device
Product Revision:
Chip Part-Number: Unknown
for this flash please help i dont know which icon to click to download
Description: [N:]USB Mass Storage Device(Kingston DT 101 II)
Protocal Version: USB 2.00
Current Speed: High Speed
USB Device ID: VID = 0951 PID = 1625
Device Revision: 0110
Manufacturer: Kingston
Product Model: DT 101 II
Product Revision: PMAP
Chip Part-Number: Unknown
use the following software used in this article
http://www.flashdrive-repair.com/2013/05/download-kingston-format-tool-online.html
and tell me the result
For micro SD try use the software used in this article and tell me the result
http://www.flashdrive-repair.com/2012/12/how-you-can-format-corrupted-or-write.html
or this
http://www.flashdrive-repair.com/2013/04/best-sd-memory-card-format-software.html
hello selam Ashraaf Muhammed
1-http://www.flashdrive-repair.com/2012/12/how-you-can-format-corrupted-or-write.html
HP USB Disk Storage Format Tool v2.0.6
says
Error
Failed to format the device
2-http://www.flashdrive-repair.com/2013/04/best-sd-memory-card-format-software.html
MMC format utility software (MMC Tools very 1.01by)
i run this prog. i slected my usb drive and format says
Error!
No disk in the driver!
hi, try the other program
hi , selam
this software cant seeing my flash usb disk
http://www.flashdrive-repair.com/2013/05/download-kingston-format-tool-online.html
ok can you give me full chip genius report of your flash drive .
hi , selam
ChipGenius 4.0 report
Description: [M:]USB Mass Storage Device(Mass Storage Device)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 248mA
USB Device ID: VID = 14CD PID = 125C
Serial Number: 125C20100726
Device Vendor: Generic
Device Name: Mass Storage Device
Device Revision: 0300
Manufacturer: Mass
Product Model: Storage Device
Product Revision:
Chip Part-Number: Unknown
hi , sorry but Chip Part-Number isn't available , so i can't find to you any software , what is the flash drive brand ???
It is writing on micro sd
brand none
RT6G3I103610
made in taiwan
its same
http://www.startimes.com/f.aspx?t=31056880
Sorry , but no software for this SD because chip genius report don't give chip vendor
ok thank you Ashraaf MUHAMMED
Dear Mr. Ashraaf,
I had use almost all tools you mentions in this post. but they didn't work.
My flash drive showing error "Please insert disk into drive E:"
here is the ChipGenius details:
Description: [M:]USB Mass Storage Device(Kingston DataTraveler2.0)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 0951 PID = 1607
Serial Number: 0803101557422
Device Vendor: Kingston
Device Name: DataTraveler2.0
Device Revision: 0100
Manufacturer: Kingston
Product Model: DataTraveler2.0
Product Revision: 1.00
Chip Vendor: Solid State Systems
Chip Part-Number: SSS6677-A3
Tools on web: http://dl.mydigit.net/special/up/sss.html
Regards,
Dileep kumar
Hello Mr Dileep , try to use the software in this article and please tell me the result
http://www.flashdrive-repair.com/2013/06/repair-sss6677a5-and-sss6677b5-and.html
if this didn't work with your flash , try this software used in this article
http://www.flashdrive-repair.com/2013/05/download-kingston-format-tool-online.html
Dear Mr. Ashraaf,
Thanks for prompt replying of my post.
The "SSS6677A5,B5 and D5 format tool" Error is
### No 3S USB Disk be found ###
and
Kingston Format Utility didn't get the device in his list.
But my PC detected it as "removable disk"
Regards,
Dileep Kumar
Thank you in advance.
Description: [O:]USB Mass Storage Device(GENERIC USB Mass Storage)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 0C76 PID = 0005
Device Vendor: GENERIC
Device Name: USB Mass Storage
Device Revision: 0100
Manufacturer: GENERIC
Product Model: USB Mass Storage
Product Revision: 1.00
Chip Vendor: Solid State Systems
Chip Part-Number: SSS6697-B7
Tools on web: http://dl.mydigit.net/special/up/sss.html
I've searched and used all the tools including the SSS_MP_Utility_v.2162, Urescue 2013 format tool and the Kingston Format Utility. I am unable to find the SSS6697-B ini file for the SSS Utility. Any suggestions would be great. Thank you.
Hi Mr F1 ok please give me your chip genius report again
Hi mr bryanc1 , please try the software use in the following article and tell me the result
http://www.flashdrive-repair.com/2013/06/repair-sss6677a5-and-sss6677b5-and.html
Thank you for the quick reply. Unfortunately, that didn't work as well. The "Go" stays grayed out when I insert my flash drive.
Hello Mr bryanc1 you know this chip vendor SSS is very difficult controller so it's to hard to find it's software .Now the last try ,what is your flash drive brand ???
My device is Kingstone Datatraveler101 64GB. My result of chipgenius is bellow.
Description: [K:]USB Mass Storage Device(USB2.0 Flash Disk)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 1221 PID = 3234
Serial Number: 10000000000012B5
Device Vendor: USB2.0
Device Name: Flash Disk
Device Revision: 0000
Manufacturer: USB2.0
Product Model: Flash Disk
Product Revision: 2.60
Chip Vendor: Micov
Chip Part-Number: MXT6208E/MW8209 - F/W 1.2.0.8
Tools on web: http://dl.mydigit.net/special/up/micov.html
Pls Help me.
First use this software that used in this article
http://www.flashdrive-repair.com/2013/05/download-kingston-format-tool-online.html
If didn't work use this software
http://www.mediafire.com/?0jqpk7x5zgzz4gc
and tell me the result
It would be the 128GB variant of this, from Centon. I wonder why it's so hard to find.
http://www.centon.com/products/usb/styles/waterproof
If I was able to even pull a list of the files off of there, I would be pretty happy. Thank you again.
Device Name: ?USB Mass Storage Device
PnP Device ID: VID = 058F PID = 9380
Serial Number: 6&&944C330&&0&&1
Revision: (Information not returned)
Device Type: Standard USB device - USB2.0 High-Speed
Chip Vendor: Alcor(??)
Chip Part-Number: AU9380~9386
Product Vendor: USB
Product Model: Mass Storage Device
Device Name: ?USB Mass Storage Device
PnP Device ID: VID = 1234 PID = 5678
Serial Number: 2011071510380177
Revision: (Information not returned)
Device Type: Standard USB device - USB2.0 High-Speed
Chip Vendor: (No match record)
Chip Part-Number: (No match record)
Product Vendor: USB
Product Model: Mass Storage Device
Tools on Web: (N/A)
USB Device ID: VID = 1E3D PID = 095C
Device Revision: 0100
Manufacturer: ChipsBnk
Product Model: Flash Disk
Product Revision: 5.00
Chip Vendor: ChipsBank
Chip Part-Number: CBM2095S - [2010-06-01B]
Flash ID Code: 01000000 - Spansion - 4CE/Single Channel [SLC]
Please Help! In panic here! Thanks a lot!
Description: USB Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
USB Device ID: VID = 090C PID = 1000
Device Revision: 1100
Chip Vendor: SMI(??)
Chip Part-Number: SM321~SM325
Tools on web: http://dl.mydigit.net/special/up/smi.html
For this flash
Chip Vendor: Alcor(??)
Chip Part-Number: AU9380~9386
use this software
http://www.mediafire.com/download/2rgtx11nr28fm35/Alcor-AU9380.rar
if not working well , use this software
http://www.mediafire.com/download/94go90969xs5hvg/ALCOR-AU9386-V1.10.rar
and please tell me the result
For this flash
Device Name: ?USB Mass Storage Device
PnP Device ID: VID = 1234 PID = 5678
Serial Number: 2011071510380177
Revision: (Information not returned)
Device Type: Standard USB device - USB2.0 High-Speed
Chip Vendor: (No match record)
Chip Part-Number: (No match record)
Product Vendor: USB
Product Model: Mass Storage Device
please insert your flash drive to another computer and give me chip genius report because in your first report no chip vendor found
For this flash
Chip Vendor: ChipsBank
Chip Part-Number: CBM2095S - [2010-06-01B]
use the software used in this article
http://www.flashdrive-repair.com/2013/06/Download-Chipsbank-Umptool-v5532-to-repair-CBM2093A1-CBM2093P-CBM2095-CBM2096-CBM2096P-CBM2193A1-CBM2193P.html
or this
http://www.flashdrive-repair.com/2013/05/download-chips-bank-firmware-CBM209X-UMPTool-v5520.html
السلام عليكم
أخبارك يا بشمهندس اشرف لو سمحت معايا فلاشة كينج ستون 4 جيجا كانت متوصلة في اللاب توب وفجاة الجهاز فصل شحن وانا فاتح ملفات من الفلاشة وبعد ما شغلت الجهاز الفلاشة ما بتشتغل ولا عارف افرمتها ولا افتحها ولا اعمل اي حاجة ده غير انها بتهنج الجهاز والجهاز بيحاول انه يفتح الفلاشة ومش عارف
ياريت تقولي اعمل فيها ايه لان عليها ملفات مهمة جدا
والف شكر لحضرتك وربنا يبارك في عمرك
نبيل خضر
Help me please..
Description: [F:]USB Mass Storage Device(Company PMP Platform OPN)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 500mA
USB Device ID: VID = 115E PID = 0003
Serial Number: 200605091234
Device Name: USB DISK
Device Revision: 0100
Manufacturer: Company
Product Model: PMP Platform OPN
Chip Vendor: Anyka(??)
Chip Part-Number: AK3221~AK3225
Reference Product: Audio Player
Description: [G:]USB Mass Storage Device(GENERIC USB Mass Storage)
Protocal Version: USB 2.00
Current Speed: High Speed
USB Device ID: VID = 0C76 PID = 0005
Device Vendor: GENERIC
Device Name: USB Mass Storage
Device Revision: 0100
Manufacturer: GENERIC
Product Model: USB Mass Storage
Product Revision: 1.00
Chip Vendor: SSS(??)
Chip Part-Number: SSS6677/SSS6690
Tools on web:??http://dl.mydigit.net/special/up/sss.html
استاذ نبيل لو انا اديتك السوفت وير التالى هيصلحلك الفلاشه ويفرمتها لكن لا اضمن لك رجوع الملفات المهمه التى تقول عليها وليس هناك حل غير الفورمات .. اذا قررت عمل الفورمات فاليك السوفت وير الخاص بفلاشتك
أولا استخدم هذا السوفت وير
تابع الموضوع ده وحمل السوفت وير فى اخر الموضوع
http://www.flashdrive-repair.com/2013/06/sss6677-usb-on-card-sorting-format-tool.html
لو ما اشتغلش مع الفلاشه
جرب السوفت وير ده
http://www.mediafire.com/?y6ciaxca2nc4b3a
وقولى النتيجه لحد ما نشوف الفلاشه بتاعتك تقريرها ده مظبوط ولا لا
Mr Boim Fals , sorry i don't deal with mp3 software
Device Name: +[P:]+Broadcom BCM2070 Bluetooth 3.0 + HS USB Device(SMI USB DISK USB Device)
PnP Device ID: VID = 0A5C PID = 219C
Serial Number: 90A4DE55E33B
Revision: 1100
Device Type: Standard USB device - USB2.0 High-Speed
Chip Vendor: (No match record)
Chip Part-Number: (No match record)
Product Vendor: SMI
Product Model: USB DISK
السلام عليكم
م اشرف
للاسف الاثنين سوفت اللي حضرتك بعتهم ليا ما اشتغلو مع الفلاشة
برجاء الإفادة
شكراً
please help
i have Description: [G:]USB Mass Storage Device(USB2.0 Flash Disk)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: Full Speed
Max Current: 100mA
USB Device ID: VID = 1234 PID = 5678
Device Revision: 0000
Manufacturer: USB2.0
Product Model: Flash Disk
Product Revision: 1.00
Chip Vendor: SSS(??)
Chip Part-Number: SSS6677
Reference Product: ??:?U????????
sararf1994@gmail.com
hi mr ss saraf use the software in this article
http://www.flashdrive-repair.com/2013/06/sss6677-usb-on-card-sorting-format-tool.html
Hola:
Description: [I:]Dispositivo de almacenamiento USB(Kingston DataTraveler 2.0)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 0951 PID = 1607
Serial Number: 5B840100034F
Device Vendor: Kingston
Device Name: DataTraveler 2.0
Device Revision: 0110
Manufacturer: Kingston
Product Model: DataTraveler 2.0
Product Revision: PMAP
Chip Vendor: Phison
Chip Part-Number: PS2251-32(PS2232) - F/W 01.03.10 [2007-09-29]
Flash ID Code: 98D594BA - Toshiba [MLC-4K]
Gracias
Hola mr dinitri tri use the software in this article first
http://www.flashdrive-repair.com/2013/05/download-kingston-format-tool-online.html
if not working with your flash drive , use this software
http://www.mediafire.com/?sg4ey8djtbd8sa6
and please tell me the result
السلام عليكم
م اشرف
للاسف الاثنين سوفت اللي حضرتك بعتهم ليا ما اشتغلو مع الفلاشة
برجاء الإفادة
شكراً
- See more at: http://www.flashdrive-repair.com/2012/12/how-to-repair-usb-flash-drive-in-three.html#sthash.y3caxf8W.eFeFy6xc.dpuf
Thanks for your efforts, you deserve a medal!!
I've searched for a along time but i didn't find any Utlities for my 2 USB Flash drives!!!
may you help me please :( ?
Both are 8GB
Device Name: +[K:]+USB Mass Storage Device(Kingston DT 101 G2 USB Device)
PnP Device ID: VID = 0951 PID = 1642
Serial Number: 001CC0EC32BCFCC15712561F
Revision: 1.00
Device Type: Standard USB device - USB2.0 Full-Speed (USB1.1)
Chip Vendor: skymedi
Chip Part-Number: SK6215/SSS6691
Product Vendor: (N/A)
Product Model: (N/A)
Tools on Web: http://dl.mydigit.net/special/up/skymedi.html
And the last one,
Device Name: +[K:]+USB Mass Storage Device(Kingston DT 101 G2 USB Device)
PnP Device ID: VID = 0930 PID = 6544
Serial Number: 0013729827EECBB1856D241F
Revision: 1.00
Device Type: Standard USB device - USB2.0 High-Speed
Chip Vendor: Toshiba
Chip Part-Number: SK6211BB/TC58NC6686G1F
Product Vendor: (N/A)
Product Model: (N/A)
Tools on Web: http://bbs.mydigit.cn/read.php?tid=72885
Thanks in advance :)
I've just followed you on G+ =]
Hello,
I got this one
Description: [G:]USB Mass Storage Device(SanDisk Cruzer Edge)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 0781 PID = 556B
Serial Number: 200608781302B6805B20
Device Vendor: SanDisk
Device Name: Cruzer Edge
Device Revision: 0126
Manufacturer: SanDisk
Product Model: Cruzer Edge
Product Revision: 1.26
Chip Part-Number: Unknown
How to format with write protected pendrive.
hi mr Ashraf
Current Speed: Full Speed
Max Current: 100mA
USB Device ID: VID = 5136 PID = 4678
Device Vendor: Generic
Device Name: USB2.0 FlashDisk
Device Revision: 1000
Manufacturer: Generic
Product Model: Flash Disk 2.0
Product Revision: 1.00
Chip Part-Number: Unknown
Hi! I have this pendrive, what tool can I use?? THANKS!!!!
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 0951 PID = 1665
Serial Number: 001CC0EC3467FD2197076527
Device Vendor: Kingston
Device Name: DataTraveler 2.0
Device Revision: 0100
Manufacturer: GENERIC
Product Model: USB Mass Storage
Product Revision: 1.00
Chip Vendor: Solid State Systems
Chip Part-Number: Unknown(??) - 0xBB
Device Name: +[D:](Generic USB Flash Disk USB Device)
PnP Device ID: VID = 058F PID = 1234
Serial Number: 5&&2A9CD882&&0&&1
Revision: /7.76
Device Type: Standard USB device -
Chip Vendor: Alcor(??)
Chip Part-Number: AU9386~AU6983
Product Vendor: Generic
Product Model: USB Flash Disk
Tools on Web: http://bbs.mydigit.cn/read.php?tid=4345
please help me canot match software iflash in your list
which tool will work on this info :-
Description: USB Mass Storage Device(Mass Storage Device)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 250mA
USB Device ID: VID = 14CD PID = 121F
Serial Number: 121F20110712
Device Vendor: Generic
Device Name: Mass Storage Device
Device Revision: 0300
Manufacturer: Mass
Product Model: Storage Device
Product Revision: 1.00
Chip Part-Number: Unknown
Description: USB Human Interface Device(USB OPTICAL MOUSE)
Device Type: Human Interface Device
Protocal Version: USB 1.10
Current Speed: Low Speed
Max Current: 100mA
USB Device ID: VID = 15D9 PID = 0A4C
Device Name: USB OPTICAL MOUSE
Device Revision: 0100
Chip Part-Number: Unknown
...
and in the iflash there is no any programs ... what can i do ??
Description: [F:]USB Mass Storage Device(Generic Flash Disk)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 0000 PID = 7777
Serial Number: 8D4D7E88
Device Vendor: Generic
Device Name: Mass Storage
Device Revision: 0103
Manufacturer: Generic
Product Model: Flash Disk
Product Revision: 8.00
Controller Vendor: Alcor Micro
Controller Part-Number: SC908AN-G/AU6989AN-G - F/W FF01
Flash ID code: 8988244B - Intel JS29F64G08AAME1 - 1CE/Single Channel [MLC-8K] -> Total Capacity = 8GB
Tools on web: http://dl.mydigit.net/special/up/alcor.html
Any help with this is appriciated! Thank you.
Hay Bro My 64gb DatastickPro flash just is on Memory Bar mode
Description: [H:]USB Mass Storage Device(USB MEMORY BAR)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 090C PID = 3000
Device Vendor: Silicon Motion,Inc.
Device Name: SM3255AA MEMORY BAR
Device Revision: 0100
Product Model: USB MEMORY BAR
Product Revision: 1000
Chip Vendor: SMI
Chip Part-Number: SM3257ENAA - ISP NONE
Help me please
I have 32gb flash drive
USB Device ID: vid = 0011 Pid = 7788
serial number: 709D54EE
device vendor: generic
device revision: 0102
manufacturer: generic
product revision: 8.00
chip vendor: alcor micro
chip part-number: unknown(??)-0xE602-F/W D90E
flash id code: 98DE9892-toshiba-1CE/Single Channel [TLC]->total capacity = 8gb
Reference Product: ??:?U????????
my disk management shows 32gb, chip genius shows 8gb, I can only access 4gb. I would like to get it fixed, it originally worked at 32gb. any help would be appreciated!
Description: [F:]USB Mass Storage Device(SKYMEDI USB Drive)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 500mA
USB Device ID: VID = 1516 PID = 8628
Serial Number: 03
Device Vendor: SKYMEDI
Device Name: USB Drive
Device Revision: 0200
Manufacturer: SKYMEDI
Product Model: USB Drive
Chip Vendor: Skymedi
Chip Part-Number: SK6211BA
Description: [I:]USB Mass Storage Device(SanDisk Cruzer Pop)
Protocal Version: USB 2.00
Current Speed: High Speed
USB Device ID: VID = 0781 PID = 5577
Device Revision: 0126
Manufacturer: SanDisk
Product Model: Cruzer Pop
Product Revision: 1.26
Chip Part-Number: Unknown
I found SDCZ53-004G at back of my sandisk 4GB pendrive
plz tell how to repair and tool
or mail me at
se7encrystal@yahoo.com
Dear Brother Asraf, Can you please help me below. i have tried to solve as per your message but at the final page where i can not found last image data to search google for download. pls help.
Description: [H:]USB Mass Storage Device(Kingston DT 101 II)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 0951 PID = 1625
Serial Number: 001D0F0C73C3A9A0D55401E3
Device Vendor: Kingston
Device Name: DT 101 II
Device Revision: 0200
Manufacturer: Kingston
Product Model: DT 101 II
Product Revision: 1.00
Chip Vendor: Skymedi
Chip Part-Number: SK6211BA
Flash ID Code: 89D7943E - Intel - 2CE/Single Channel [MLC] -> Total Capacity = 8GB
Tools on web: http://dl.mydigit.net/special/up/skymedi.html
not respon my compter
<>
Protocal Version: USB 2.00
Current Speed: Full Speed
Max Current: 200mA
USB Device ID: VID = 0930 PID = 6544
Serial Number: 4F490CE07E01CCC1487FA47A
Device Vendor: TOSHIBA
Device Name: TransMemory
Device Revision: 0100
Manufacturer: GENERIC
Product Model: USB Mass Storage
Product Revision: 1.00
Chip Vendor: Toshiba
Chip Part-Number: SK6211BB/TC58NC6686G1F
And how about with mine. I have ADATA Flash Drive with this specification :
USB Device ID: VID = 125F PID = C08A
Serial Number: AA04012700008874
Device Vendor: ADATA
Device Name: ADATA USB Flash Drive
Device Revision: 1100
Manufacturer: ADATA
Product Model: USB Flash Drive
Product Revision: 1100
Chip Vendor: SMI
Chip Part-Number: SM3255AB - ISP 100304-AB-
Flash ID Code: ECD798CA - Samsung - 1CE/Single Channel [TLC] -> Total Capacity = 4GB
I try used the application that provided by those methode but, won't work. it says that my FD have bad sector.
So i decided try this http://www.flashdrive-repair.com/2013/04/a-data-usb-flash-disk-format-tool-and.html
But when i start the application, it says that it doesn't detect any USB Drive, but i had attached it.
Can you help me, please ?
Pls help me with my 8GB flash drive
I've tried some similar firmwares nothing worked :(
Device Name: +[J:]+USB Mass Storage Device(Kingston DT 101 G2 USB Device)
PnP Device ID: VID = 0951 PID = 1642
Serial Number: 001D6004CBA5BCB0E5970055
Revision: PMAP
Device Type: Standard USB device - USB2.0 High-Speed
Chip Vendor: phison(??)
Chip Part-Number: PS2250
Product Vendor: Kingston
Product Model: DT 101 G2
Tools on Web: http://dl.mydigit.net/special/up/phison.html
Hello Ashraf, i hope you can help me with this pendrive here are the chipgenius info:
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 090C PID = 3000
Device Vendor: Silicon Motion,Inc.
Device Name: SM3252A MEMORY BAR
Device Revision: 0100
Product Model: USB MEMORY BAR
Product Revision: 1000
Chip Vendor: SMI
Chip Part-Number: SM3252D - ISP NONE Roger
Flash ID Code: 98D59432 - Toshiba - 1CE/Single Channel [MLC-8K] -> Total Capacity = 2GB
Tools on web: http://dl.mydigit.net/special/up/smi.html
Hi ashraf, plz help me my toshiba 8gb flash disk
Description: [E:]USB Mass Storage Device(ChipsBnk Flash Disk)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: Full Speed
Max Current: 100mA
USB Device ID: VID = 1E3D PID = 095C
Device Revision: 0100
Manufacturer: ChipsBnk
Product Model: Flash Disk
Product Revision: 5.00
Controller Vendor: ChipsBank
Controller Part-Number: CBM2096(V96)/CBM2096P(V96P) - [2010-06-01]
Tools on web: http://dl.mydigit.net/special/up/chipsbank.html
Dear Ashraf
Can you please help me. I have tried to follow the steps you have shown. And still i have no joy. My flash drive is still unusable. Can you please help.
Thank you Adisen
Description: [E:]USB Mass Storage Device(SanDisk Firebird)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: Full Speed
Max Current: 200mA
USB Device ID: VID = 0781 PID = 5530
Serial Number: 0123456789ABCDEF
Device Vendor: SanDisk Corporation
Device Name: Firebird6Sp9
Device Revision: 0107
Manufacturer: SanDisk
Product Model: Firebird
Product Revision: 1.07
Chip Part-Number: Unknown
PLEASE, I NEED HELP..!!!
USB: KINGSTON "DT109" 8GB
Description: [E:]Dispositivo de almacenamiento masivo USB(2261 PRAM)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 50mA
USB Device ID: VID = 13FE PID = 3E00
Device Name: 2261 PRAM
Device Revision: 0110
Product Model: 2261 PRAM
Product Revision: 1.00
Chip Vendor: Phison
Chip Part-Number: PS2251-61(PS2261) - F/W 01.01.10 [2011-01-26]
Flash ID Code: 98DE9892 - Toshiba [TLC]
hello
sir
my computer is not recognized USB devices when i plug in
how to repair ?
it is kingston DT 101G2 64 gb
email me chandu7200@gmail.com
sir please help me out sir these r my drive's details
Description: [I:]USB Mass Storage Device(Generic Flash Disk 2.0)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 5136 PID = 4678
Device Vendor: Generic
Device Name: USB2.0 FlashDisk
Device Revision: 1000
Manufacturer: Generic
Product Model: Flash Disk 2.0
Product Revision: 2.40
Chip Vendor: Micov
Chip Part-Number: MXT6208E/MW8209 - F/W 0.0.0.0
Tools on web: http://dl.mydigit.net/special/up/micov.html
Hi Ashraf,
Please help me fixing the 4 GB sony flash.
Below is full information after running ChipGenius.
I have tried but i cant reach step: Flash Drive Repair Step 3
Description: [G:]USB Mass Storage Device(Chipsbnk UDisk)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = ABCD PID = 1234
Serial Number: 1304291105421096179601
Device Vendor: Chipsbnk
Device Name: UDisk
Device Revision: 0100
Manufacturer: Chipsbnk
Product Model: UDisk
Product Revision: 5.00
Chip Vendor: ChipsBank
Chip Part-Number: CBM2198A - [2012-12-20]
Flash ID Code: A5965A69 - 4CE/Single Channel [TLC]
Tools on web: http://dl.mydigit.net/special/up/chipsbank.html
Description: (PQI PQI USB Flash Drive)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 500mA
USB Device ID: VID = 3538 PID = 0901
Device Vendor: PQI
Device Name: PQI USB Flash Drive
Device Revision: 1100
Chip Part-Number: Unknown
can be this repairable
Description: [E:]USB Mass Storage Device(USB DISK 2.0)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 13FE PID = 3E00
Serial Number: 0701C218655B5D60
Device Name: USB DISK 2.0
Device Revision: 0100
Product Model: USB DISK 2.0
Product Revision: PMAP
Chip Vendor: Phison
Chip Part-Number: PS2251-61(PS2261) - F/W 03.07.10 [2011-12-13]
Flash ID Code: 98DEA482 - Toshiba [MLC]
Description: [G:]USB Mass Storage Device(Kingston DataTraveler G3)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 0951 PID = 1643
Serial Number: 001CC0EC3519BB70A7180017
Device Vendor: Kingston
Device Name: DataTraveler G3
Device Revision: 0100
Manufacturer: Kingston
Product Model: DataTraveler G3
Product Revision: PMAP
Chip Vendor: Phison
Chip Part-Number: PS2251-50(PS2250) - F/W 03.01.10 [2010-04-20]
Flash ID Code: ADD7949A - Hynix [MLC]
Tools on web: http://dl.mydigit.net/special/up/phison.html
sir,
when i plug in the pendrive in window xp , it says windows - delayed write Failed
Hi ! If there any chance to recovre my data in this Flash disk
Thank you !
Description: [D:]Périphérique de stockage de masse USB(General USB Flash Disk)
Protocal Version: USB 2.00
Current Speed: High Speed
USB Device ID: VID = 090C PID = 1000
Device Revision: 1100
Manufacturer: General
Product Model: USB Flash Disk
Product Revision: 1100
Chip Vendor: SMI(??)
Chip Part-Number: SM321~SM325
Tools on web: http://dl.mydigit.net/special/up/smi.html
Device Name: ++USB Input Device(HP v100w USB Device)
PnP Device ID: VID = 15D9 PID = 0A4C
Serial Number: 6&&1BCAD829&&0&&2
Revision: 2048
Device Type: Standard USB device - USB2.0 High-Speed
Chip Vendor: (No match record)
Chip Part-Number: (No match record)
Product Vendor: HP
Product Model: v100w
Tools on Web: (N/A)
how to repair