아래의 신품기계를 판매합니다.
● 동탄성계수측정기 (Model ERUDITE Mk IV )
● Features
· Automated resonant frequency testing.
· Fast testing-Automatically sweeps through range frequency.
· Measures fundamental resonant frequencies-longitudinal,
torsional and flexural.
· Measures damping constnt 'Q'.
· Manual mode for detailed examination and testing.
· Memory for result storge.
· Serial output to PC or Printer.
● Benefits
· Can be used to determine dynamic modulus of elasticty, rigidity, poisson's ratio.
· Can be used to determine ultrasonic pulse velocity.
· Can be used on a wide range of materials, including concrete, ceramics, refractory
materials, glass, graphite, stone, etc.
· Widely used for concrete freeze-thaw testing.
· Also used for theminal cycling or thermal shock testing.
|
공진주파수 |
;
측정모드 |
콘크리트 시험체가 갖고 있는 고유의 공진주파수[Resonant Frequency]를 비파괴적으로 측정해내, 그 재료의
탄성계수[Dynamic Modulus of Elasticity], 경도계수[Dynamic Modulus Rigidity], 및 동프와송비[Dynamic Poission's Ration] 등을 산출해 낼수 있는 장비입니다. 특히 기존의 검출방식과는 달리, 자체 비교 회로에 의해 공진주파수[Resonant Frequency]를 검출해 내고 재료의 감쇄상수 'Q'값을 자동계산 및 모든 측정 데이타 값을
자동 저장합니다. ASTM 규정된 시험체에 대한 3축[3軸] 방향으로의 측정이 가능하여 조건에 적합한 시험을 수행
할 수 있습니다.
Specifications |
1. Measurements |
Frequency Range Frequensy Resolution Output Voltage Output Monitor Input Monitor |
1Hz∼100kHz 1∼99.99Hz = 0.01Hz, 100∼999.9Hz = 0.1Hz, 1000∼9999Hz = 1Hz and >10kHz = 10Hz 0∼2V pk-pk into 3Ω load (0.707V R.M.S into 3Ω, 1.5W) limited by software for health and safety reasons 0∼2V pk-pk from BNC socket on rear panel for oscilloscope 'X' input 0∼2.5V pk from BNC socket on rear panel for oscilloscope 'Y' input |
2. Display |
Frequencies, voltages and option menus displayed on a 20 character x 4-line liquid crystal display |
3. Key Pad |
16-key sealed membrane, for entering data and control parameters |
4. Drivers |
Contact vibrator for large mass specimens Electro-magnetic air gap driver for small mass apecimens |
5. Vibtation Sensor |
Miniature accelerometer for large mass specimens Electro-magnetic air gap driver for small mass apecimens Surface mounting accelerometer for transverse mode test |
6. Environmental |
Power Supply : 110/230V, 50/60Hz single phase AC (user selectable) Operating Temperature Range : 0∼40℃
|
7. Components |
· Test bench with accessories for longitudinal testing · Electronics unit · Vibrator assembly · Accelerometer assembly |
8. Optional Extras |
· Torsional Testing Kit · Flexural Testing Kit · Pickup Kit-includes surface mounting accelerometer and air plates · Oscilloscope and connecting leads |
| |
상담문의
www.wookyungse.co.kr 의 TEL: 02 . 453 . 4594 |