스크랩 [PlayOut] Schumacher Racing Mi7 1/10th Competition Touring Car 슈마커 신형 전동투어링 발매예정 (미정)

[하비센터 관리자]

말머리 선택하지 않고  작성되는글은  삭제처리하겠습니다,

사이트 주소와 사진만 올려두고 사이트 들어와서 구매 하란식의 홍보는 제한합니다.

---

 1. 제품 설명 ::슈마커 Mi7

 2.가격 ::미정

 3.쇼핑몰 주소 및 연락처 :: (수입사 주소및 연락처) www.playout.kr

4.제품 상세 사진. :: (제품에 관한 주소 링크를 허용하지 않습니다!! 직접 찍어서 올려주시기 바랍니다,,)

안녕하세요 플레이아웃 입니다.

슈마커사의 신형 전동 투어링 미션7 Mi7이 발매예정입니다.

10월말경이라고 하는데 정확한 날짜가 나오는대로 알려드리겠습니다.

초도한정으로 미드 리어 모터 옵션이 포함되어 있습니다.

샤시 x 2  어퍼덱 x 2  벨트 x 4

Mi7 Specification		Equipment Needed
		2 Channel Radio Motor Servo Electric Speed Control Wheels & Tyres Motor Pinion 2s Lipo Battery, stick or shorty. Bodyshell
Power Source:	ELECTRIC
Model Type:	4WD, ON-ROAD, COMPETITION
Length:	300mm
Width:	185mm
Top Speed:	70 MPH+
Features
Main Features... - Mid Motor or Rear Motor included in first batch. - Ultimate low centre of gravity. - Locating dowels on major components improve build accuracy and reduce tweak. - Double wishbone suspension for increased suspension rigidity, and reduced play, with single turnbuckle for easy camber adjustment. - Durable and more efficient drive train with larger pulley's 22:40. Great for stock racing. - Fully adjustable, suspension geometry, wheelbase, caster, camber, roll centre, ackerman, droop, anti-dive, anti-squat, front and rear toe in/out, ride height and much more.    - Speed secret parts available to fine tune to all track conditions.   Precision alloy gear diff, with large oil volume for improved consistency.  Ball raced diff outputs with all new high precision gears. Rear track rod for infinite adjustment to rear toe-in. This can be tuned for the use of passive rear steering.  Arrowmax supplied, industry standard fitting spur gear. 5mm wide for increased durability.   Alloy rear driveshaft bones with steel axles.  Symmetrical chassis cutout offers consistent chassis flex.  Simple twin bell crank chassis mounted steering assembly.  Features new moulded bell cranks with adjustable travel stops.   Low profile threaded brass insert. Eliminates the need for nuts.  Interchangeable hub carrier.  Lightweight upper wishbone.  Rebuildable double joint driveshafts.   Ultra short shocks with no loss of stroke for ultra-low centre of gravity.  Upper and lower shock pivots. Screw on fitment, for easy assembly and maintenance.  Stiff 4mm shock towers with optimised shock positions.   Chassis mounted bumper. Stronger, lighter and more aerodynamic.  Ultra lightweight 40 tooth front spool. With alloy outputs.  Easy access front spool and rear differential.  Generic front and rear anti roll bars in 0.1mm increments with laser engraving.  Suspension straps and blocks.  Incorporates new precision moulded inserts. Enables width adjustment without the need for  expensive optional parts.  2.0mm Carbon Fibre, horizontal top deck.  Ultra durable ‘Long Life’ blades.  2 position, LiPo adjustment for fine tuning weight distribution with a Shorty option. LiPo retention mouldings. No tape required.  Carbon fibre wishbones for improved stiffness & strength.  Lightweight alloy & carbon fibre CNC servo mount. Dowels throughout for consistent alignment. Super low motor mount. Lowers motor by 0.5mm and optimises central weight distribution.  Anti-roll bar drop link.  Aerospace carbon fibre 2.25mm soft weave chassis and components throughout.  Hollow, precision steel layshaft. 22 tooth 7075 alloy pulley.  Includes lightweight roll bar sockets. 32 precision ball raced bearings. Precision matched shock springs.  Ultra fine adjustment eccentrics for optimum belt tension. Ball raced suspension pivot mounts for reduced friction and easier assembly. “O” ring retained alloy wheel hexes.