|
Description[edit]
In thermodynamic terms, all organic tissues are composed of chemical energy, which, when not maintained by the constant biochemical maintenance of the living organism, begin to chemically break down due to the reaction with water into amino acids, known as hydrolysis. The breakdown of the proteins of a decomposing body is a spontaneous process. Protein hydrolysis is accelerated as the anaerobic bacteria of the digestive tract consume, digest, and excrete the cellular proteins of the body.
Putrefaction in human hands after several days of one of the Oba Chandler victims underwater in Florida, United States
The bacterial digestion of the cellular proteins weakens the tissues of the body. As the proteins are continuously broken down to smaller components, the bacteria excrete gases and organic compounds, such as the functional-group amines putrescine (from ornithine) and cadaverine (from lysine), which carry the noxious odor of rotten flesh. Initially, the gases of putrefaction are constrained within the body cavities, but eventually diffuse through the adjacent tissues, and then into the circulatory system. Once in the blood vessels, the putrid gases infiltrate and diffuse to other parts of the body and the limbs.
The visual result of gaseous tissue-infiltration is notable bloating of the torso and limbs. The increased internal pressure of the continually rising volume of gas further stresses, weakens, and separates the tissues constraining the gas. In the course of putrefaction, the skin tissues of the body eventually rupture and release the bacterial gas. As the anaerobic bacteria continue consuming, digesting, and excreting the tissue proteins, the body's decomposition progresses to the stage of skeletonization. This continued consumption also results in the production of ethanol by the bacteria, which can make it difficult to determine the blood alcohol content (BAC) in autopsies, particularly in bodies recovered from water.[1]
Generally, the term decomposition encompasses the biochemical processes that occur from the physical death of the person (or animal) until the skeletonization of the body. Putrefaction is one of seven stages of decomposition; as such, the term putrescible identifies all organic matter (animal and human) that is biochemically subject to putrefaction. In the matter of death by poisoning, the putrefaction of the body is chemically delayed by poisons such as antimony, arsenic, carbolic acid (phenol), nux vomica (plant), strychnine (pesticide), and zinc chloride.
Approximate timeline[edit]
Timeline of postmortem changes (stages of death), with putrefaction labeled near middle.
The rough timeline of events during the putrefaction stage is as follows:
Order of organs' decomposition in the body:[2]
The rate of putrefaction is greatest in air, followed by water, soil, and earth. The exact rate of putrefaction is dependent upon many factors such as weather, exposure and location. Thus, refrigeration at a morgue or funeral home can retard the process, allowing for burial in three days or so following death without embalming. The rate increases dramatically in tropical climates. The first external sign of putrefaction in a body lying in air is usually a greenish discoloration of the skin over the region of the cecum, which appears in 12–24 hours. The first internal sign is usually a greenish discoloration on the undersurface of liver.
Factors affecting putrefaction[edit]
Various factors affect the rate of putrefaction.[3][4][5]
Exogenous (external)[edit]
Environmental temperature: Decomposition is accelerated by high atmospheric or environmental temperature, with putrefaction speed optimized between 21 °C (70 °F) and 38 °C (100 °F), further sped along by high levels of humidity. This optimal temperature assists in the chemical breakdown of the tissue and promotes microorganism growth. Decomposition nearly stops below 0 °C (32 °F) or above 48 °C (118 °F).
Moisture and air exposure: Putrefaction is ordinarily slowed by the body being submerged in water, due to diminished exposure to air. Air exposure and moisture can both contribute to the introduction and growth of microorganisms, speeding degradation. In a hot and dry environment, the body can undergo a process called mummification where the body is completely dehydrated and bacterial decay is inhibited.
Clothing: Loose-fitting clothing can speed up the rate of putrefaction, as it helps to retain body heat. Tight-fitting clothing can delay the process by cutting off blood supply to tissues and eliminating nutrients for bacteria to feed on.
Manner of burial: Speedy burial can slow putrefaction. Bodies within deep graves tend to decompose more slowly due to the diminished influences of changes in temperature. The composition of graves can also be a significant contributing factor, with dense, clay-like soil tending to speed putrefaction while dry and sandy soil slows it.
Light exposure: Light can also contribute indirectly, as flies and insects prefer to lay eggs in areas of the body not exposed to light, such as the crevices formed by the eyelids and nostrils.[3]
Endogenous (internal)[edit]
Age at time of death: Stillborn fetuses and infants putrefy slowly due to their sterility. Otherwise, however, younger people generally putrefy more quickly than older people.[citation needed]
Condition of the body: A body with a greater fat percentage and less lean body mass will have a faster rate of putrefaction, as fat retains more heat and it carries a larger amount of fluid in the tissues.[5]
Cause of death: The cause of death has a direct relationship to putrefaction speed, with bodies that died from acute violence or accident generally putrefying slower than those that died from infectious diseases. Certain poisons, such as potassium cyanide or strychnine, may also delay putrefaction, while chronic alcoholism and cocaine will speed it.[citation needed]
External injuries: Antemortem or postmortem injuries can speed putrefaction as injured areas can be more susceptible to invasion by bacteria.[citation needed]
Delayed putrefaction[edit]
Certain poisonous substances to the body can delay the process of putrefaction. They include:
Embalming[edit]
Embalming is the process of preserving human remains by delaying decomposition. This is acquired through the use of embalming fluid, which is a mixture of formaldehyde, methanol, and various other solvents. The most common reasons to preserve the body are for viewing purposes at a funeral, for above-ground interment or distant transportation of the deceased, and for medical or religious practices.
Research[edit]
Body farms subject donated cadavers to various environmental conditions to study the process of human decomposition.[7] These include The University of Tennessee's Forensic Anthropologic Facility, Western Carolina Universities Osteology Research Station (FOREST), Texas State University's Forensic Anthropology Research Facility (FARF), Sam Houston State University's Southeast Texas Applied Forensic Science Facility (STAFS), Southern Illinois University's Complex for Forensic Anthropology Research, and Colorado Mesa University's Forensic Investigation Research Station. The Australian Facility for Taphonomic Experimental Research, near Sydney, is the first body farm located outside of the United States [8] In The United Kingdom there are several facilities which, instead of using human remains or cadavers, use dead pigs to study the decomposition process. Pigs are less likely to have infectious diseases than human cadavers, and are more readily available without any concern for ethical issues, but a human body farm is still highly sought after for further research.[9] Each body farm is unique in its environmental make-up, giving researchers a broader knowledge, and allowing research into how different environmental factors can affect the rate of decomposition significantly such as humidity, sun exposure, rain or snow, altitude level and more.
Other uses[edit]
Putrefaction, the eighth alchemical key of Basil Valentine, 1678, Chemical Heritage Foundation
In alchemy, putrefaction is the same as fermentation, whereby a substance is allowed to rot or decompose undisturbed. In some cases, the commencement of the process is facilitated with a small sample of the desired material to act as a "seed", a technique akin to the use of a seed crystal in crystallization.[citation needed]
See also[edit]
References[edit]
External links[edit]
첫댓글 심해의 난파선은 수온이 낮고 공기접촉이 없어 부패속도가 늦어진다. 0도이하나 48도이상에서는 부패가 정지되어 극지나 사막에서도 부패속도는 거의 정지수준이다. 그래서 선박의 장기보관을 위해 일부러 침몰시키기도 한다.