상품DB//인도네시아 불포화 폴리에스터 수지 시장동향(2014.6)//폴리아세탈수지ㆍ그 밖의 폴리에테르와 에폭시수지, 폴리카보네이트ㆍ알키드수지ㆍ폴리아릴에스

[piaazhead]

제목	인도네시아 불포화 폴리에스터 수지 시장동향(2014.6)
게시일	2016-03-23	국가	인도네시아	작성자	김주선(자카르타무역관)
품목	폴리아세탈수지ㆍ그 밖의 폴리에테르와 에폭시수지, 폴리카보네이트ㆍ알키드수지ㆍ폴리아릴에스테르와 그 밖의 폴리에스테르[일차제품(primary form)으로 한정한다]
품목코드	3907
작성일자: 2014.6.13 작성자: 자카르타 무역관 Kim Eun Hee(ehkim@kotra.or.kr), Ruth Duhita(ruth@kotra.or.id) 1. Market Overview  ○ Ministry of Industry noted, currently there are about 925 plastic manufacturers from upstream to downstream, and absorb more than 37,000 workers. The growth of the plastics industry will continue to be encouraged with the provision of government borne import duty facility (BMDTP). In addition, the government also encourages the development of the petrochemical industry as the main pillar of the plastics industry. Competitiveness will be enhanced by accelerating the implementation of SNI in order to improve competitiveness and protection for the local industry through SNI for five upstream chemical products sector.  ○ Plastic industry will likely continue to grow rapidly, according to the Association of Industrial Aromatic, Olefin and Plastic Indonesia (Inaplas), plastic consumption nationwide in 2013 predicted reached around 3 million tons or an increase of about 7% of consumption previous year that reached 2.8 million tons.  ○ The increase was driven by increasing demand of packaging industry and the domestic plastic industry that is optimistic that demand of plastic will still increase, because of the demand from the food and beverage industry continues to strengthen, and the automotive sector that plan to continue to increase its production capacity. Despite concerns with the flood of imported food and beverage products in the local market will erode plastic local market.  ○ Currently plastic raw material products that are already have production facilities in the country are: Plastic Resins Manufacturers in Indonesia Production Capacity of Plastic Resin in Indonesia, 2013 (Tons per Year)  ○ Local raw materials have not yet been able to fully supply the demand of downstream industries. For example, for products PP resins capacity of 550,000 tons per year, while the demand of it reached 842,000 tons. Some plastic products raw materials had to be imported, whereas the number of plastic consumption in Indonesia tends to increase every year. Indonesia is a potential market; consumption is only expected to grow 7 percent annually. Comparison between the Plastic Raw Material Production Capacity and Local Demand, 2012  ○ As for the finished plastic products, is estimated to Indonesia will import 420,000 tons, up 3.7% from last year's imports of 405,000 tons. Imports includes tarpaulin products, toys, and pipes and others. 2. Competition Trend □ Local Production of Unsaturated Polyester Resin  ○ There are 9 manufacturers of Unsaturated Polyester Resin in Indonesia. Major manufacturers of Unsaturated Polyester Resin are PT Justus Sakti Raya, PT Eternal Buana Chemical Industries, PT Pardic Jaya Chemicals, and PT Airindo Pacific Chemicals.  ○ PT Justus Sakti Raya is the first and the largest of the manufacturer of Unsaturated Polyester Resin in Indonesia. The company has a production capacity around 40,000 tons per annum. The products are applicable for Boat, Flat and Corrugated Sheet, Paper Impregnation, Pipes, Tanks, Profiles, Sanitary Wares, Reinforced Plastics, FRP Reduced Fire Hazard, Gelcoat, Topcoat, FRP Chemical Resistance, SMC/BMC, Flexibilizer Resin, Varnishes/Wood Coating, Buttons, Synthetic Marbles, Clear Casting, Putty, Polyester Pigment Paste, Plywood/Decorative Board, Vehicle Body, Building Industry, Consumer goods, etc.  ○ Further information about the company and its products; please refer to the table below: Manufacturer of Unsaturated Polyester Resin □ Import Trend  ○ To get more detail data about the import trend of the product, we contacted Indonesian Statistic Agency (BPS). Unsaturated Polyester Resin is classified as HS Code 3907.91. In this report, besides present the import trend of Unsaturated Polyester Resin (HS Code 3907.91), we also show the import trend of Polyester Resin in general (HS Code 3907). Product Description of HS Code 3907  ○ In general, the import of Polyester Resin reached US$ 851 million in 2013. It has increased 2.5% compare to the previous year.  ○ The import of Unsaturated Polyester Resin (HS Code 3907.91) reached US$ 26.15 million in 2013. It decreased 52.8% compare to the previous year. Import Value of HS Code 3907 into Indonesia     Source: BPS  ○ China, South Korea, and Thailand were the 3 major origin countries of the import polyester resins in Indonesia. China dominated 23.25% of the import of polyester with growth 40.8%, then followed by South Korea in the second position with share 19.89% with only 5.3% of growth. Origin Countries of Import of HS Code 3907 into Indonesia       Source: BPS  ○ For Unsaturated Polyester Resin, the import that reached US$ 26.15 million in 2013 was majored by the import of other form besides chips and liquid/paste. The Unsaturated Polyester Resin with chips form was imported as much as US$ 8.3 million (31.7%), while the liquid/paste form was US$ 3 million (11.5%). However, all of these forms showed decrement on its imports. Import Value of HS Code 3907.91 (Unsaturated Polyester Resin) into Indonesia              Source: BPS  ○ China (22.9%), Malaysia (22.0%), and Japan (12.1%) were the major origin countries of the import of Unsaturated Polyester Resin into Indonesia in 2013. Meanwhile South Korea was ranked in the 12th position with share only 1.6%. Import of Unsaturated Polyester Resin from South Korea reached US$ 415,148 in 2013 that decreased 26.7% compared to previous year that reached US$ 566,301 in 2012. Origin Countries of Import Value of HS Code 3907.91 (Unsaturated Polyester Resin) into Indonesia       Source: BPS