FOX 32 mm RL 2010
정비사진등록
▼Figure 1: Removing the Rebound Knob

▼Figure 2: Removing the Blue Lockout Lever

▼Note:Make sure that the lockout lever retaining ring
is in place, as shown below. The lockout lever snaps onto and is thereby secured by this ring

▲Remove the original bottom nut, and discard the crush washer. Thread a used bottom nut onto the damper shaft at least halfway, and place the socket over it. Free the damper from the lower assembly by firmly smacking the socket with a plastic faced hammer
▼Figure 3: Used Bottom Nut for Loosening the Damper Shaft


△▼Figure 4: Removing the Damper

▲▽Figure 5: Damper Removed

▼Figure 6: Removing the Smalley Seal Head Retaining Ring


▲▽Carefully pry under and remove the Smalley seal head retaining ring, to allow you to pop out the seal head, to separate the damper shaft assembly from the damper body.

△▼Separated by means of the snap ring is bound to the tube at the bottom of the stanchions awl


▲▽Fox Shock Parts Exploded View photos and a dedicated oil


▼ FOX 32mm RL overhaul is complete

FOX 32 mm RLrebounds function tests
첫댓글 지난 여름 튼튼건강위해 열심히 거친패달링 돌리며 함께 복식 호흡한 요놈들을 위해
겨울철 하나 하나 시간될때 마다 정성으로 닦고 조이고 기름칠하고 있습니다.
정성으로 잘 보살펴쓰니 꽃피는 춘삼월 요놈들 산과 들에서 펄~펄~~ 날겠죠!!~ ㅎ
모두 모두 해피한 목요일 오후 시간 되시길.. 아자!아자!!~~ 홧팅!!~ 임다...꾸벅!~
좋아요! 엄지 척!
ㅎ~~ 깜쏴!!~~~ㅎ~