|
A satellite navigation or satnav system is a system that uses satellites to provide autonomous geo-spatial positioning. It allows small electronic receivers to determine their location (longitude, latitude, and altitude/elevation) to high precision (within a few metres) using time signals transmitted along a line of sight by radio from satellites. The system can be used for providing position, navigation or for tracking the position of something fitted with a receiver (satellite tracking). The signals also allow the electronic receiver to calculate the current local time to high precision, which allows time synchronisation. Satnav systems operate independently of any telephonic or internet reception, though these technologies can enhance the usefulness of the positioning information generated.
A satellite navigation system with global coverage may be termed a global navigation satellite system (GNSS). As of December 2016 only the United States NAVSTAR Global Positioning System (GPS), the Russian GLONASS and the EUs Galileo are global operational GNSSs. China is in the process of expanding its regional BeiDou Navigation Satellite System into the global BeiDou-2 GNSS by 2020.[1] The European Union's Galileo is a global GNSS scheduled to be fully operational by 2020.[2] India currently has satellite-based augmentation system, GPS Aided GEO Augmented Navigation (GAGAN), which enhances the accuracy of NAVSTAR GPS and GLONASS positions. India has already launched the IRNSS, with an operational name NAVIC (Navigation with Indian Constellation), a constellation of satellites for navigation in and around the Indian Subcontinent. It is expected to be fully operational by June 2016. France and Japan are in the process of developing regional navigation systems as well.
Global coverage for each system is generally achieved by a satellite constellation of 18–30 medium Earth orbit (MEO) satellites spread between several orbital planes. The actual systems vary, but use orbital inclinations of >50° and orbital periods of roughly twelve hours (at an altitude of about 20,000 kilometres or 12,000 miles).
Satellite navigation systems that provide enhanced accuracy and integrity monitoring usable for civil navigation are classified as follows:[3]
Early predecessors were the ground based DECCA, LORAN, GEE and Omega radio navigation systems, which used terrestrial longwave radio transmitters instead of satellites. These positioning systems broadcast a radio pulse from a known "master" location, followed by a pulse repeated from a number of "slave" stations. The delay between the reception of the master signal and the slave signals allowed the receiver to deduce the distance to each of the slaves, providing a fix.
The first satellite navigation system was Transit, a system deployed by the US military in the 1960s. Transit's operation was based on the Doppler effect: the satellites travelled on well-known paths and broadcast their signals on a well-known frequency. The received frequency will differ slightly from the broadcast frequency because of the movement of the satellite with respect to the receiver. By monitoring this frequency shift over a short time interval, the receiver can determine its location to one side or the other of the satellite, and several such measurements combined with a precise knowledge of the satellite's orbit can fix a particular position.
Part of an orbiting satellite's broadcast included its precise orbital data. In order to ensure accuracy, the US Naval Observatory (USNO) continuously observed the precise orbits of these satellites. As a satellite's orbit deviated, the USNO would send the updated information to the satellite. Subsequent broadcasts from an updated satellite would contain the most recent accurate information about its orbit.
Modern systems are more direct. The satellite broadcasts a signal that contains orbital data (from which the position of the satellite can be calculated) and the precise time the signal was transmitted. The orbital data is transmitted in a data message that is superimposed on a code that serves as a timing reference. The satellite uses an atomic clock to maintain synchronization of all the satellites in the constellation. The receiver compares the time of broadcast encoded in the transmission of three (at sea level) or four different satellites, thereby measuring the time-of-flight to each satellite. Several such measurements can be made at the same time to different satellites, allowing a continual fix to be generated in real time using an adapted version of trilateration: see GNSS positioning calculation for details.
Each distance measurement, regardless of the system being used, places the receiver on a spherical shell at the measured distance from the broadcaster. By taking several such measurements and then looking for a point where they meet, a fix is generated. However, in the case of fast-moving receivers, the position of the signal moves as signals are received from several satellites. In addition, the radio signals slow slightly as they pass through the ionosphere, and this slowing varies with the receiver's angle to the satellite, because that changes the distance through the ionosphere. The basic computation thus attempts to find the shortest directed line tangent to four oblate spherical shells centred on four satellites. Satellite navigation receivers reduce errors by using combinations of signals from multiple satellites and multiple correlators, and then using techniques such as Kalman filtering to combine the noisy, partial, and constantly changing data into a single estimate for position, time, and velocity.
The original motivation for satellite navigation was for military applications. Satellite navigation allows the precision in the delivery of weapons to targets, greatly increasing their lethality whilst reducing inadvertent casualties from mis-directed weapons. (See Guided bomb). Satellite navigation also allows forces to be directed and to locate themselves more easily, reducing the fog of war.
The ability to supply satellite navigation signals is also the ability to deny their availability. The operator of a satellite navigation system potentially has the ability to degrade or eliminate satellite navigation services over any territory it desires.
The United States' Global Positioning System (GPS) consists of up to 32 medium Earth orbit satellites in six different orbital planes, with the exact number of satellites varying as older satellites are retired and replaced. Operational since 1978 and globally available since 1994, GPS is currently the world's most utilized satellite navigation system.
The formerly Soviet, and now Russian, Global'naya Navigatsionnaya Sputnikovaya Sistema (Russian: ГЛОбальная НАвигационная Спутниковая Система, GLObal NAvigation Satellite System), or GLONASS, is a space-based satellite navigation system that provides a civilian radionavigation-satellite service and is also used by the Russian Aerospace Defence Forces. The full orbital constellation of 24 GLONASS satellites enables full global coverage.
The European Union and European Space Agency agreed in March 2002 to introduce their own alternative to GPS, called the Galileo positioning system. Galileo became operational on 15 December 2016 (global Early Operational Capability (EOC)) [4] At an estimated cost of EUR 3.0 billion,[5] the system of 30 MEO satellites was originally scheduled to be operational in 2010. The original year to become operational was 2014.[6] The first experimental satellite was launched on 28 December 2005.[7] Galileo is expected to be compatible with the modernized GPS system. The receivers will be able to combine the signals from both Galileo and GPS satellites to greatly increase the accuracy. Galileo is expected to be in full service in 2020 and at a substantially higher cost.[2] The main modulation used in Galileo Open Service signal is the Composite Binary Offset Carrier (CBOC) modulation.
China has indicated they plan to complete the entire second generation Beidou Navigation Satellite System (BDS or BeiDou-2, formerly known as COMPASS), by expanding current regional (Asia-Pacific) service into global coverage by 2020.[1] The BeiDou-2 system is proposed to consist of 30 MEO satellites and five geostationary satellites. A 16-satellite regional version (covering Asia and Pacific area) was completed by December 2012.
System | GPS | GLONASS | BeiDou | Galileo |
---|---|---|---|---|
Owner | United States | Russian Federation | China | European Union |
Coding | CDMA | FDMA | CDMA | CDMA |
Orbital altitude | 20,180 km (12,540 mi) | 19,130 km (11,890 mi) | 21,150 km (13,140 mi) | 23,222 km (14,429 mi) |
Period | 11.97 h (11 h 58 min) | 11.26 h (11 h 16 min) | 12.63 h (12 h 38 min) | 14.08 h (14 h 5 min) |
Revolutions per sidereal day | 2 | 17/8 | 17/9 | 17/10 |
Number of satellites | 31 (at least 24 by design)[8] | 28 (at least 24 by design) including:[9] 24 operational 2 under check by the satellite prime contractor 2 in flight tests phase | 5 geostationary orbit (GEO) satellites, 30 medium Earth orbit (MEO) satellites | 18 full operation capable satellites in orbit 30 operational satellites budgeted |
Frequency | 1.57542 GHz (L1 signal) 1.2276 GHz (L2 signal) | Around 1.602 GHz (SP) Around 1.246 GHz (SP) | 1.561098 GHz (B1) 1.589742 GHz (B1-2) 1.20714 GHz (B2) 1.26852 GHz (B3) | 1.164–1.215 GHz (E5a and E5b) 1.260–1.300 GHz (E6) 1.559–1.592 GHz (E2-L1-E11) |
Status | Operational | Operational | 22 satellites operational, 40 additional satellites 2016-2020 | 18 satellites operational 12 additional satellites 2017-2020 |
Chinese regional (Asia-Pacific, 16 satellites) network to be expanded into the whole BeiDou-2 global system which consists of all 35 satellites by 2020.
The NAVIC or NAVigation with Indian Constellation is an autonomous regional satellite navigation system developed by Indian Space Research Organisation (ISRO) which would be under the total control of Indian government. The government approved the project in May 2006, with the intention of the system completed and implemented on 28 April 2016. It will consist of a constellation of 7 navigational satellites.[10] 3 of the satellites will be placed in the Geostationary orbit (GEO) and the remaining 4 in the Geosynchronous orbit(GSO) to have a larger signal footprint and lower number of satellites to map the region. It is intended to provide an all-weather absolute position accuracy of better than 7.6 meters throughout India and within a region extending approximately 1,500 km around it.[11] A goal of complete Indian control has been stated, with the space segment, ground segment and user receivers all being built in India.[12] All seven satellites, IRNSS-1A, IRNSS-1B, IRNSS-1C, IRNSS-1D, IRNSS-1E, IRNSS-1F, and IRNSS-1G, of the proposed constellation were precisely launched on 1 July 2013, 4 April 2014, 16 October 2014, 28 March 2015, 20 January 2016, 10 March 2016 and 28 April 2016 respectively from Satish Dhawan Space Centre.[13][14] The system is expected to be fully operational by August 2016.[15]
The Quasi-Zenith Satellite System (QZSS), is a proposed three-satellite regional time transfer system and enhancement for GPS covering Japan. The first demonstration satellite was launched in September 2010.[16]
GNSS augmentation is a method of improving a navigation system's attributes, such as accuracy, reliability, and availability, through the integration of external information into the calculation process, for example, the Wide Area Augmentation System, the European Geostationary Navigation Overlay Service, the Multi-functional Satellite Augmentation System, Differential GPS, and inertial navigation systems.
Doppler Orbitography and Radio-positioning Integrated by Satellite (DORIS) is a French precision navigation system. Unlike other GNSS systems, it is based on static emitting stations around the world, the receivers being on satellites, in order to precisely determine their orbital position. The system may be used also for mobile receivers on land with more limited usage and coverage. Used with traditional GNSS systems, it pushes the accuracy of positions to centimetric precision (and to millimetric precision for altimetric application and also allows monitoring very tiny seasonal changes of Earth rotation and deformations), in order to build a much more precise geodesic reference system.[17]
The two current operational low Earth orbit satellite phone networks are able to track transceiver units with accuracy of a few kilometers using doppler shift calculations from the satellite. The coordinates are sent back to the transceiver unit where they can be read using AT commands or a graphical user interface.[18][19] This can also be used by the gateway to enforce restrictions on geographically bound calling plans.
|title=
(help)|title=
(help)