In this experiment, the photon density of the ablation laser is very important. 이 실험에서는 절삭용 레이저의 광자밀도(레이저광의 세기)를 잘 조절하는 것이 매우 중요하다.
When it was tightly focused, the packed metallocene(*) powder target (8mm in diameter~ 7mm in thickness) was easily scattered inside the chamber in a few seconds, and then the laser photons hit the wall of the sample holder. 레이저광의 초점을 조밀하게 맞출 경우, 목표물인 정제(錠劑) 상태의 메탈로센 파우더 ( 직경 8mm, 두께 7mm )는 시료실 안에서 몇 초만에 분해되어 산란되어 버리고 그렇게 되면 레이저 광이 시료 지지대의 벽을 때리게 된다.
Thus, a loosely focused laser beam (5-8mm in diameter) was the best choice. 따라서, 초점을 느슨하게 맞춘 레이저 빔(직경 5~8mm 정도의)이 가장 적당하다.
After ~1h of ablation, a cylindrical hole of ~5mm deep, having the same diameter as the laser beam, was generated on the metallocene sample target. 약 1시간 동안의 절삭과정을 거치자, 메탈로센 시료 위에 약 5mm 정도의 깊이에, 레이저 빔의 직경과 같은 직경의 원통형 구멍이 형성되었다.
The black-tinted final products were characterized with XRD, a FE- TEM, an EPMA, a SQUID, and an EELS attached to the TEM instrument 최종 결과물은 검은 빛을 띠고 있었으며 특성 파악을 위해 XRD(X-ray Diffraction, X선 회절 분석법), FE-TEM(Field Emission Transimission Electron Microscope, 투과 전자 현미경), EPMA(Electron Probe Micro-Analyser, 전자탐침형 미소 분석기), SQUID(Superconducting Quantum Interference Device, 스퀴드, 초전도 양자 간섭 장치), 그리고 투과전자현미경 장치에 부착된 EELS(Electron Energy Loss Spectroscopy, 전자 에너지 손실 분광장치)를 사용하였다.
주*) 메탈로센(metallocene) 시클로펜타디엔과 전이금속이 샌드위치 구조로 결합한 새로운 유기금속화합물인 비스(시클로펜타디엔일)금속의 총칭으로 대부분 승화성이 있고, 철이 결합한 페로센을 제외하고는 불안정하여 연구가 진척되지는 못하고 있다. 시클로펜타디엔에 전자가 풍부해서 친전자성반응이나 플라델크래프츠 아실화 ·알킬화 반응을 한다.