스크랩 [코리아알씨] NEW! 신제품 1/8 EP 4WD r/s INFERNO VE , 1/10 EP 4WD r/s DBX VE 2.0 RTR 제품 2종 입고안내~~!!!!

[하비센터 관리자]

말머리 선택하지 않고  작성되는글은  삭제처리하겠습니다,

사이트 주소와 사진만 올려두고 사이트 들어와서 구매 하란식의 홍보는 제한합니다.

---

 1. 제품 설명 ::   1/8 EP 4WD r/s INFERNO VE

                       조종기는 포함이 되어 있으며 주행에 필요한 배터리와 충전기는 별도 구매하셔야 합니다.                                      

                        1/10 EP 4WD r/s DBX VE 2.0

                      조종기는 포함이 되어 있으며 주행에 필요한 배터리와 충전기는 별도 구매하셔야 합니다.

2.가격 ::          1/8 EP 4WD r/s INFERNO VE  소비자가격 648000원

                       1/10 EP 4WD r/s DBX VE 2.0   소비자가격 460000원

 3.쇼핑몰 주소 및 연락처 ::  www.korearc.co.kr  02-529-2334 담당정현우

4.제품 상세 사진. :: (제품에 관한 주소 링크를 허용하지 않습니다!! 직접 찍어서 올려주시기 바랍니다,,)

34101T2B Inferno VE Readyset

Power and acceleration tests the bounds of common sense in a buggy that also features nimble control !

Factory assembled Inferno VE Readyset delivers blistering acceleration of 0-50m in 3.5 seconds; now updated with minor changes. With its formidable reputation built on the racing scenes around the world, the VE uses the flagship model as a base to add a new transmitter/receiver/servo/brushless motor & ESC as well as minor enhancements to the chassis design. The new Syncro KT-231P transmitter delivers vastly improved control and features precision setting adjustments with throttle end point adjust, dual rate adjuster, plus a high-torque and high-speed steering servo. In addition, the powerful new Team ORION brushless motor and ESC combines with big bore oil shocks and high-grip square block tires to deliver superior performance on any surface. The Inferno VE 2.0 KT-231P allows anyone to test the bounds of common sense with powerful brushless motor acceleration.

Shares the same stylish gun metallic anodized finish aluminum parts as Kyosho’s flagship “Inferno MP9”.

Team ORION NEON8 brushless motor delivers powerful acceleration. 2-piece motor mount allows easy backlash adjustment and removal of motor.

Team ORION VORTEX R8 ESC with electric cooling fan features a 12-item program that allows precision adjustments such as brake, timing advance, cutoff voltage and heat protection.

Large Big Bore resin oil shocks produce excellent surface tracing. High-strength aluminum shock stays deliver full shock absorber performance.

Turnbuckle upper arms and steering tie rod can be adjusted to optimize alignment setting to running conditions.

Included high-torque (KS5031-09MW) steering servo delivers nimble control feel. Features built-in high durability metal gears.

Lowered chassis height in combination with optimal weight balance and big bore shocks realizes high stability running performance.

Square block pattern tires provide ultra high grip and combine with high visibility neon red dish wheels.

High visibility printed body is designed for airborne stability and control and is also pre-cut with decals applied.

• Pre-assembled chassis and body in a Readyset package can be ready for action the day you buy it.
• Full-time 4WD with low C of G 3-diff shaft drive.
• Big Bore oil shocks & 4-wheel independent double wishbone suspension.
• Full bearing specifications with 18 ball bearings on drive system and suspension.
• Features thick suspension arms with high torsional rigidity.
• Wide variety of optional parts is available to upgrade the chassis.
• Equipped with 1.0 module metal main gear, designed for hard running.
• Features high precision, efficiency and strength machined spiral gears on front/rear gear diff ring & pinion.
• Installed with high efficiency and high strength machined metal gears on center diff. Realizes stable performance even under severe driving conditions.

< ReadySet Contents > Pre-assembled chassis with pre-installed RC linkages Completed body pre-painted with decals attached Syncro KT-231P transmitter Team Orion VORTEX 10 EVO brushless motor installed Team Orion Vortex R10 Sports ESC installed Hexagonal wrench 3-types (2.0, 2.5, 5,0mm) 17mm wheel wrench Cross wrench

< Required for operation > 2 x 7.2V for chassis (recommended NiMH battery) Battery charger for chassis AA-size alkaline batteries x 4 for transmitter Tools for maintenance (large and small Phillips head screw driver)

Chassis Technical Data

Length	496mm
Width	307mm
Height	189mm
Wheelbase	323-328mm
Tread (F/R)	F : 258mm/R : 261mm
Tire(F/R)	F115 x 45mm/ F115 x 45mm
Gear Ratio	12.7:1
Weight	3,550g approx.
Motor	Team ORION NEON 8

34201T2B DBX VE 2.0

R/C system and servo enhance dynamic brushless motor performance with the latest control technology!

The convenience of 1/10 scale mixes with 1/8 scale performance levels in the DBX VE 2.0, and is now equipped with the latest in R/C control technology. Precision detailed setting is possible through throttle end-point adjustment for accelerator and brake, and steering dual-rate adjustment for steering angle that augments the standard throttle and steering trim on the included 2.4GHz Syncro KT-231P transmitter. Linear steering feel is delivered by the new torque-type KS4031-06W steering servo that resists kickback from the road surface. In addition to superior control, the new DBX VE 2.0 is equipped with a colorful printed body with white motif and high-vis neon yellow wheels that light up the track. The formidable chassis features aluminum parts anodized in signature gun metallic and is equipped with the Team ORION power source of the former model. 1/8 scale racing buggy tires combine with long wheelbase and wide tread to deliver excellent stability to extract the full power of the brushless motor under any conditions.

Simple chassis structure features an inner cover as a barrier to dirt and dust and is excellent for maintenance. Receiver is installed inside the radio box for protection against the elements.

Equipped with high rigidity dish-type wheels. Micro square pattern tires are included as standard but can be changed to 1/8 GP buggy tires.

One-piece battery box is also compatible with lithium batteries. Battery is fixed securely for strong shock resistance.

Aluminum die cast mount firmly secures the Team ORION VORTEX R10 EVO brushless motor to deliver maximum power through to the drive system.

Team ORION VORTEX R10 Sports ESC features 5 programs to choose from. Super plug connection and cooling fan meet the demands of large currents.

Fully interchangeable suspension arms and front-rear interchangeable shock stays and knuckles are excellent for spare parts quantity and cost efficiency.

Features large capacity oil shocks with dial adjustment of chassis height. Optimal shock spring rates can be selected to match chassis specifications.

Includes Syncro KT-231P 2.4GHz transmitter with automatic frequency band control. Dial setting adjustments make it easy to adjust, even for beginners.

Advanced design of forward cabin-type body delivers superior aerodynamic effect. Printed body is pre-cut with decals attached.

• Combines the simplicity of 1/10 class with the dynamic performance of 1/8 class.
• Gun metallic anodized aluminum parts create a formidable racing style.
• Compatible with a wide variety of 1/8 racing buggy tires and wheels.
• Features high-torque waterproof servo that delivers superior controllability.
• Equipped with servo saver to protect servo from crash impact.
• Team Orion VORTEX R10 Sports features auto-cut function when overheating or low voltage situation occurs.
• Large size center shaft and swing shafts on each wheel deliver high rigidity and strength.
• Precision setting of chassis height, camber, tread and toe angle can be made.
• Gear ratio optimized for 1/8 racing buggy wheels & tires.

< ReadySet Contents > Pre-assembled chassis with pre-installed RC linkages Completed body is pre-painted with decals attached Syncro KT-231P transmitter Team Orion VORTEX 10 EVO brushless motor installed Team Orion Vortex R10 Sports ESC installed Hexagonal wrench 3-types (2.0, 2.5, 5,0mm) Cross wrench

< Required for operation > 7.2V for chassis (recommended NiMH battery) Battery charger for chassis battery AA-size alkaline batteries x 4 for transmitter Tools for maintenance (large and small Phillips head screw driver)

Chassis Technical Data

Length	475mm
Width	300mm
Height	154mm
Wheelbase	320mm
Tread (F/R)	246mm/246mm
Tire(F/R)	F115 x 45mm/ F115 x 45mm
Gear Ratio	8.87 : 1
First reduction	2,88 (46T/16T)
Second reduction	3.08 (450T/13T)
Weight	2,370g approx.
Motor	Team ORION VORTEX 10 EVO