닥터피알피키트(DR.PRP)/피일피키트/피알피주사/PRPKIT/닥터PRP/

[지엘메디]

닥터피알피키트(DR.PRP)

문의:02-6272-6270 / 010-9535-4842

DR.PRP (닥터피알피)

The PRP theraphy is gaining in popularity as "the blood injection of miracle." PRP contains several different growth factors and other cytokines which may elicit gathering of stem cells around the damaged region stimulating cellular proliferation and tissue regeneration. Since the patient uses his or her own blood for the collection of platelets, there is absolutely no possibility of infection or other side effects.

Dr.PRP is a medical device exclusively designed for PRP separation. Highly concentrated platelets by the Dr.PRP kit release large amounts of growth factors which are normally inside the platelets. The large amount of released growth factors induces the theraphy of damaged connective tissue rapidly and robustly. These growth factors may lead stable regeneration of the damaged area by collecting the cells capable of wound theraphy induction.

Extraction of Buffy Coat

1st centrifugation separation spin Plasma and buffy coat extraction Plasma : yellowish layer, little cells White cell band : leukocyte and platelets Red Cell fraction : RBC layer * Extraction of whole plasma and buffy coat, some upper RBC 2nd centrifugation concentration spin Extraction of lower fraction plasma and white Cells band

Distinct Features of Dr.PRP

1. Safety
   - We have built safety and reliability of the Dr.PRP Kit by exclusively using biocompatibility-certification completed raw materials as well as thorough gamma-ray sterilization system according to the ISO 13485
2. One Step - Simplicity
   - Contamination from surrounding air during the concentration of platelets is blocked by adopting the One-Kit system and double safety cap. Because of this feature, the secondary contamination possibility is minimized unlike the cases of the similar products in the market.
3. Speed & Convenience
   - The Buffy coat layer can be conveniently and easily identified by any ordinary person that precise separation of highly concentrated PRP is easily done.
4. Compatibility
   - Any swinging bucket type centrifuge may be compatible with Dr.PRP Kit.

Dr.PRP Prolotherapy

Orthopedic medicine Healing process

• Plantar Fasciitis, sports ligament injuries, frozen shoulder, chronic elbow inflammation
• Recovery from postoperative pain, damaged shoulder rotator cuff, tendon injury
• Achilles tendinitis, chondromalacia patellae, ligament injury of ankle, cartilage damage, degenerative arthritis, etc.

Dr.PRP Skin Regeneration Therapy

Cosmetic Rejuvenation

• Wrinkle improvement: fine wrinkles, eye wrinkles, wrinkles around mouth, forehead wrinkles
• Skin pores and elasticity: reduction of skin pore size, improvement in skin elasticity and skin tone
• Skin pigmentation disorders: skin whitening against hyper-pigmentation such as freckles, skin blemish, etc.
• Other applications: improvement in hair loss, chapped skin, burn wound, dark circle, etc.

​How to use Dr.PRP

	In a 20 cc syringe take 2 cc of anticoagulant, then draw 18cc of blood from a subject (final volume : 20 cc)
	Inject the drawn blood to Dr.PRP kit through the upper injection port until the blood level reaches the 20cc scale marked on the kit. (For easier injection, tilt the kit)
	Separate the plasma layer and red blood cell (RBC) layer by thd first centrifugation. (Prior to centrifugation, balance the weight of kit with counterbalance) Conditions for the First Centrifugation (RPM)   Female : 3,000 RPM 3 minutes Male : 3,000 RPM 4 minutes When fail the separation : 3,000 RPM 1 minutes * For subjects taking aspirin, antihypertensive drugs, with cardiac disease, anemia, or during menstruation, the centrifugation should be done for 4 min at 1,000 RCF
	After the first centrifugation, identify the separation position of the plasma and the RBC layer. Then adjust the height of the separated boundary to the indicated point by pushing up or pulling down the adjusting knob located at the lower part of the Kit. (If the volume of the plasma layer or the separation is not quite welldone, additional centrifugation may be done for about 1-2 min at same RPM)
	In order to block the plasma and the RBC layer completely, fasten the adjusting knob (clockwise) located at the lower part of the Kit. Then fasten the valve(clockwise) just above the adjusting knob. Finally fasten the adjusting knob(clockwise) again.
	Put the fastened PRP Kit to the centrifuge with counterbalance for the second centrifugation to enrich the concentrated platelet. * Condition for the second centrifugation : 6 min at 3,200 RPM
	Place the PRP Kit in its upright position with care in order to prevent mixing of the separated PRP and PPP. Open the upper silicone lid on the Kit. Using a 10cc syringe with a long needle (> 5 cm) take out the PPP layer slowly from the upper part leaving 4 cc at the base.
	Shake and mix the remaining 4 cc of the PRP layer. Then administrate the PRP

https://www.youtube.com/watch?v=e1IgqdeBtYo&version=3&hl=ko%5FKR

닥터피알피키트(DR.PRP)

문의:02-6272-6270 / 010-9535-4842