대만 GNS-25 NON -GUIDE BUSHING TYPE SLIDING HEAD CNC LATHE

[Time News]

GNS-25 NON -GUIDE BUSHING TYPE SLIDING HEAD CNC LATHE

Outstanding Features Machine Specifications Standard Accessories Optional Accessories

Ge Fong Compactly Constructed GNS-25 An Exact Solution For Part Turning The Ge fong GNS-25 non-guide bushing type Sliding Head CNC Lathe combines speed and flexibility in one machine. It's a new compact design but with greater capacity. 25mm, bar capacity with maximum 3,500 rpm spindle speed. 8-tool turret and 3 position ID tool rest are designed to move only in X axis direction for greater rigidity and stability. Its sliding head design makes parts machining more precise, stable and provides a fine surface effect. Special LCD monitor combined with machine operation panel assure maximum operational convenience. More profitable production is achievable with the Ge Fong GNS-25.

Outstanding Features:

HYDRAULIC CHUCK The headstock is equipped with a powerful hydraulic chuck for fast and secure workpiece clamping. It fully eliminates shrinking backward problems during machining. PRECISION LINEAR MOTION GUIDES The headstock traverses on precision linear motion guides , assuring smooth movement .

Tool Rest (Turret & ID Tool Rest) Moves Only In Redial (X-axis) Direction. Tool rest on a conventional fixed head CNC lathe moves on either 1 or both 2 ( X , Z ) axes simultaneously. However, the tool rest on the Ge Fong GNS-25 is specially designed only. This greatly upgrades rigidity and cutting stability.

PARAMETER DESCRIPTION DISPLAY Description of each parameter selected by the cursor is displayed at the bottom of the parameter menu. assuring no mistakes in parameter changing or setting. LCD MONITOR Instead of a conventional CRT monitor, the machine is equipped with an LCD monitor which does not reflect light, emits less heat and lasts longer.

MACHINE OPERATION PANEL The operation panel provides various control buttons. such as spindle CW. spindle CCW, stop, optional stop, block skip, machine lock, Z-axis lock, single block run, and MPG dry run, etc. It provides convenience for program checking and trial cutting. SEPARATED CNC OPERATION PANEL The CNC operation panel and machine operation panel are separated, permitting one set CNC operation panel are separated, permitting one setCNC operation panel that can be used for several machines.

Machine Specifications :

ITEM		GNS-25	UNIT
Main spindle	Controller	PC BASED	SET
	Tool turret	TAIWAN MADE	SET
	Min. speed	100	rpm
	Max. speed	6000	rpm
	X axis stroke	160	rpm
	Z axis stroke	75	mm
	Bar capacity <Dia.>	Ø25	mm
	X.Y.Z Rapid travel speed	12	m/min
	Face fixed ID tool collet size	ER16	mm
	Face fixed ID tool collet Nos.	4	pcs
	OD tool shank size	16*16	mm
	OD tool Nos.	8	pcs
	Spindle center height	950	mm
Machine accuracy	Min. Unit	0.001	mm
	Positioning accuracy	0.001	mm
	Repeated accuracy	±0.001	mm
C axis	Arbitrary angle spindle positioning	NONE	YES/NONE
	Pin-locked 15-degree incremental positioning	NONE	YES/NONE
Capacity	Main spindle motor	2.2 / 3	Kw / HP
	Servo motor	0.4 Kw	Kw / HP
	Coolant pump motor	1 HP	Kw / HP
	Hydraulic motor	0.75 / 1	Kw / HP
Machine size	L*W*H	1055*855*1430	mm

Standard Accessories:

ITEM	UNIT
Collet chuck 富士25#	SET
ER16 Collet	SET
2-position ID drill holder rest	SET
16mm OD tool	SET
Standard Tool Set	SET
Inverter-controlled spindle motor	SET
Svervo driver	SET
Worklamp	SET
Flow sensor	SET
Auto lubrication sys.	SET
Hydraulic sys.	SET
Coolant sys.	SET
Product catcher	SET
Auto power OFF	SET
Transformer 220/380	SET
Bar feeder interface	SET

Optional Accessories:

ITEM	UNIT
Automatic voltage regulater <AVR>	SET
Chip tank	SET
Chip cart	SET
Air blow	SET
Cut-off sensor	SET
Rotary guide bush holder	SET
Coolant pump motor 1HP	SET
Small bore spindle sleeve	SET
Manually loaded single bar feeder	SET
Automatic bar feeder	SET
3 Jaw ckuck	SET

＊ All specification are subject to change without notice in advance ＊