Rotor를 열어보면 2군데 볼이 있다. 안쪽과 바깥커버쪽 볼 수량은 안쪽 49개 바깥쪽 49개다. 볼 크기는 9.52mm 추정된다. 어떤 자료에서 찾지 못했고 신품 로터에서 확인 못했고 판매점에는 사이즈가 8.73mm 9.00mm 9.52mm가 있는데 로터를 열어 볼을 재보니 안쪽 볼은 9.49mm 바깥쪽 볼은 9.47mm로 체크 되네요 로터를 15년이상 사용하다보니 볼이 닮은것 같네요. 이번에 9.52mm 신품으로 볼을 구입 교체해 봤습니다.
When you open the rotor, there are two balls. The number of balls inside and outside the cover is 49 inside and 49 outside. Ball size is estimated at 9.52mm. I couldn't find it in any data, I couldn't confirm it on the new rotor, and there are sizes 8.73mm 9.00mm 9.52mm at the store, but when I opened the rotor and measured the ball, the inner ball is 9.49mm and the outer ball is 9.47mm. After using the rotor for more than 15 years, the ball is It seems to be similar. This time, I bought and replaced the ball with a new 9.52mm.
볼 교체 후 조립시에는 그림B에 C표시 제어판이 그림A A쪽에 위치에 놓고 조립해야 정상 작동 됩니다. B쪽에 놓으면 비정상 작동 됩니다
When assembling after replacing the ball, the control panel marked C in Figure B must be placed on the A side of Figure A for normal operation. If you put it on B side, it will work abnormally
교체 전 바같쪽 볼
바깥쪽 볼이 구리스가 다 말라 있고 볼이 녹도 쓸어 있고, 10년이상 사용해서인지 볼도 많이 닮았고 모양도 정구형이 아니라 좀 찌그러져 보이고 실제로 구형을 제보니 방향에 따라 싸이즈가 다르게 체크 됩니다
☆ 교체전 안쪽 볼
이것은 내부쪽 볼 입니다. 이것도 구리스가 거의 말랐고 볼은 80%정도는 광이 살아 있고 볼 싸이즈가 이것도 0.03mm 줄었습니다
그림A
그림 B