Digital Slot Caliper
After years of trying to get accurate, consistent Distance From Tail (DFT) fin measurements, David Dipol has created the ultimate tool.
The digital slot caliper was designed to allow a stable platform for distance From tail measurement.
Improve your skiing performance,
Exchange fin settings with friends, coaches, pros with confidence.
Read the review on Ball of Spray:
- Holding the caliper in your right hand pull back the slide past the slot. Slip the slot onto the back of the fin making sure that it stops against the fin.

- With the left hand thumb hold down the front of the caliper to the bottom of the ski. Move the slide forward until it stops at the back of the fin. Press zero to reset.

- Move the slide back past the tail of the ski allowing the caliper lie flat on the bottom of the ski. Then slide forward to reveal tail measurement number.

Only $125

Or call David Dipol (504) 915-9292
or e-mail david@slotcaliper.com
첫댓글 국내에서 사는게 더 효과적일 겁니다...^^ 저야 몇개 있긴 하지만, 외국에서 사는것보다 국내에서 사는게 더 편할것 같네요 ~~~ better!! (제품은 똑같거든요!!) / 위와같은 디지털방식은 대게 mm/inch를 다 쓸순 있지만 값의 변화차가 커서 좀 불편하기도 합니다. 또한 dial 식으로 사실 분들은 mm인지 inch인지 정확히 확인후 구매하십시요. 한국분들은 inch로 오면 좀 어려워하는 모습을 종종 봅니다... 하지만dial식은 값의 편차가 크지 않기 때문에 훨씬 측정하기가 좋습니다... 참조바랍니다..>^^
중요한 점은 가운데 홈이있느냐 하는거죠. 홈 없는건 마트에도 있을거에요.
홈이 있어 매력이 있네요...^^ 처음 사용하시는 분들에게는 꽤 편할것 같습니다... (사실 tail 부분이 젤 귀찮긴 합니다 : 스키 구조상 R진 부분들이 많아 정확한 포지션 잡기가 어려움) 가격도 나름 매력이 있구요...!! caliper나 기타 측정장비 전문업체의 물건들은 대게 20만원이 훌쩍 넘어가는걸 감안한다면 가격대비 매력 좋습니다...!! / 단, a/s문제라던지 측정값의 허용오차들의 정확성을 추구하신다면 전문 브랜드를 사용하시는것도 괜찮습니다... 단, 가격이~~~ ㅋㅋㅋ [저 캘리퍼에 게이지 방식이면 바로 지를텐데..>^^]