하나 솔루션 콜드 러너는 MAXI 니들 클로저 6bar를 위한 압축 공기
잠수 노즐 팁의 표준 직경 12mm I 13mm I 14mm I 15mm | 16mm | 20mm
냉각수 온도/압력 18° C –25° C / 4bar /6bar
사용된 탄성체형 LSR 10–80 쇼어 진공 시스템 영구 설계 권장 노즐 거리 180° C
게이트 직경 0.5mm~1.2mm(MAXI)에서 부품 분사 중량은 약 0.5~200g
The Hana Solution cold runners are designed for best function
under the following system conditions:
Compressed air for MAXI needle closure 6bar
Standard diameter of the submersion nozzle tip 12mm I 13mm I 14mm I 15mm | 16mm | 20mm
Cooling water temperature / pressure 18° C –25° C / 4bar
/6bar
Used elastomer type LSR 10–80 Shore A
Vacuum system permanent design recommended
Cavity temperature considered for nozzle distance 180° C
Parts injection weight at gate diameter 0.5mm~1.2 mm (MAXI) approx. 0.5–200g