Call Status 화면의 각 숫자들이 뭘 뜻하는 건지 찾아보다가
웹에서 찾아냈습니다.
쩝 이런 자료는 어느 게시판에 올려야하는지...
Call status 들어가는 방법은 쩝.. 아래에 영어로도 되어있구.
자주묻는질문 게시판에도 있죠?
http://ridge.trideja.com/wireless/ststatus.html#cps 에서 펌.
Deciphering the Call & Battery Status Screens on CDMA Digital StarTAC's (776x, 786x)
Thanks to Richard Ness for providing a good chunk of this information. I haven't cleaned up most of it yet, and I'm still trying to fill in the last section... E-mail me if you have any info: ryang@trideja.com
USE AT YOUR OWN RISK!!!
IT IS STRONGLY SUGGESTED THAT CAUTION IS USED
First, Get into Test mode: FCN 00 ** 83786633 STO
Then, enable the Debug Menu Feature:
5509# then changing bit 6 from 0 to 1 (i.e.01000100 STO)
And Reboot the Phone:
01#
Now just press FCN FCN to get the new menu.
Use standard scroll and select buttons. CLR or END to exit.
The only selections that should be used are:
Battery Status Mode
Call Status Mode
Vocoder
Call Status Mode - CDMA |
AAA |
PseudoNoise Offset of strongest active pilot |
BBB |
Ec/Io of strongest active pilot |
CCC |
Number of pilots in active set (Soft-Handoff Candidates) 1-3 on Lucent-based networks, 1-6 on Nortel. |
DD |
Number of pilots in neighbour set |
xEEE |
Current CDMA Carrier channel (eg 384, 426, 468, 510 for Cellular) 7760 Shows only Channel Num. 786x will show C for Cellular Band, or P for PCS band before number - See PRL) |
FFF |
PseudoNoise Offset of strongest neighbour pilot |
GGG |
Ec/Io of strongest neighbour pilot |
H |
Number of pilots in candidate set (shows 1 briefly as SH candidates are added) |
III |
Call processing state |
JJ |
Last call indicator |
KKK |
Current RF RSSI in dBm |
LLL |
Current transmit power in dBm (N/A if idle) |
MM.MM |
Frame error rate |
NN |
Dropped call counter |
OOO |
Current service option |
PPPP |
Current SID (in HEX in Canada) |
Q |
Current NID |
RR |
Call counter | |
AAA BBB C DDxEEE FFF GGG H III JJ KKK LLL MM.MM NN OOO PPPPx Q RR | |
Call Status Mode - Analog |
AAA |
Current channel |
BBB |
RSSI |
CC |
?1 on B side, 0 on A Side? |
DDD |
Current RF Channel (0 in analog) |
EEE |
Word Syncs |
FFF |
Bad Words |
GGG |
Call Processing State |
HH |
Last Call Indicator |
II |
Dropped Call Count |
JJJ |
Seconds until retry for Digital |
KKKK |
Current SID | |
AAA BBB x CC DDD EEE FFF x GGG HH xxx xxx x xxx II JJJ KKKKx | |
Battery Status Mode - Not Charging |
AAA |
Temp in C |
B |
0 = Discharging main 1 = Charging main 2 = Discharging Aux 3 = Charging Aux |
C.CC |
Voltage of B+ rail |
DD |
percentage of battery remaining |
E |
0 = Discharging/destroyed 1 = battery detect 2 = waiting to charge 3 = Rapid charge 4 = Top off charge 5 = Maintenance charge 6 = Paused |
F |
L = Lithium N = NMh U = Does not recognize | |
|
Battery Status Mode - Charging |
AAA |
Temp in C |
B |
0 = Discharging main 1 = Charging main 2 = Discharging Aux 3 = Charging Aux |
D |
F = Fast charge S = Slow charge |
E.EE |
Voltage of B+ rail |
FFF |
Unphased charge current |
GGG |
Phased charge current |
H |
0 = Discharging/destroyed 1 = battery detect 2 = waiting to charge 3 = Rapid charge 4 = Top off charge 5 = Maintenance charge 6 = Paused |
I |
L = Lithium N = NiMh U = Does not recognize | |
|
I have not seen any official documentation on the various status displays that appear in the following lists, so currently they are only educated guesses to the ones I have seen myself.
Call Processing State |
IDL |
Idle |
PAG |
Page - Incoming Call or Short Message |
VOH |
Analog (?) Virtual Off Hook |
TIM |
Synchronizing Phone's Clock with Network |
CON |
Connection In Use |
ORG |
Originating (Outgoing) Call |
UOH |
Analog (?) |
REL |
Mobile Releasing Call |
RPM |
|
RPW |
|
AWT |
Await Channel Assignment |
SEZ |
Seize Paging Channel |
NA |
No Info Available |
AWR |
|
WFO |
Analog (?) Just before Incoming Call |
WFA |
Analog (?) Just before Incoming Call | |
Last Call Indicator |
BR |
Base Release |
MR |
Mobile Release |
SM |
Short Message |
NI |
No Information |
?? |
No Information (Analog) |
L2 |
Call Dropped? |
N5 |
- |
TC |
Return to D. from A? |
MP |
- |
RR |
-Remote Ring Release? |
NC |
- |
|
|
|
|
|
| |
Current Service Option |
13V |
Qualcomm 13Kbps Purevoice Codec |
8V |
Original 8Kbps Codec |
8EV |
Enhanced Variable Rate Codec (EVRC) |
AD2 |
Asynchronous Data Mode 2 |
FD2 |
Asynchronous Fax Mode 2 |
8L |
8Kbps Loopback |
13L |
13Kbps Loopback |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Return to Main Page
Ryan Goolevitch - ryang@trideja.com
Last Modified August 22, 2001
첫댓글 좋은 정보 감사합니다...^^