9744244_허권주_컴퓨터학부_1021

[허권주]

###############################################################
######## 베지어 곡선 그리기 #########
###############################################################

// lab08View.h : interface of the CLab08View class
//
/////////////////////////////////////////////////////////////////////////////

#if !defined(AFX_LAB08VIEW_H__1A723E66_7056_44EF_8D71_FEB86DAE3AAF__INCLUDED_)
#define AFX_LAB08VIEW_H__1A723E66_7056_44EF_8D71_FEB86DAE3AAF__INCLUDED_

#if _MSC_VER > 1000
#pragma once
#endif // _MSC_VER > 1000

#define LINE_MODE 1
#define ELLIPSE_MODE 2
#define RECTANGLE_MODE 3
#define POLY_RUBBER_MODE 4
#define POLY_NOTRUBBER_MODE 5
#define POLY_BEIZER_MODE 6

#include "MainFrm.h"

class CLab08View : public CView
{
protected: // create from serialization only
CLab08View();
DECLARE_DYNCREATE(CLab08View)

// Attributes
public:
CLab08Doc* GetDocument();

// Operations
public:

// Overrides
// ClassWizard generated virtual function overrides
//{{AFX_VIRTUAL(CLab08View)
public:
virtual void OnDraw(CDC* pDC); // overridden to draw this view
virtual BOOL PreCreateWindow(CREATESTRUCT& cs);
protected:
virtual BOOL OnPreparePrinting(CPrintInfo* pInfo);
virtual void OnBeginPrinting(CDC* pDC, CPrintInfo* pInfo);
virtual void OnEndPrinting(CDC* pDC, CPrintInfo* pInfo);
//}}AFX_VIRTUAL

// Implementation
public:
COLORREF m_BeizerColor;
int m_nCount;
CPoint m_ptData[50];
COLORREF m_BrushXORColor;
COLORREF m_BrushColor;
COLORREF m_PenXORColor;
COLORREF m_PenColor;
BOOL m_bLButtonDown;
BOOL m_bFirst;
CPoint m_ptPrev;
CPoint m_ptStart;
CString m_strDrawMode;
int m_nDrawMode;
virtual ~CLab08View();
#ifdef _DEBUG
virtual void AssertValid() const;
virtual void Dump(CDumpContext& dc) const;
#endif

protected:

// Generated message map functions
protected:
//{{AFX_MSG(CLab08View)
afx_msg void OnLine();
afx_msg void OnEllipse();
afx_msg void OnRectangle();
afx_msg void OnPolyRubber();
afx_msg void OnPolyNotrubber();
afx_msg void OnLButtonDown(UINT nFlags, CPoint point);
afx_msg void OnMouseMove(UINT nFlags, CPoint point);
afx_msg void OnLButtonUp(UINT nFlags, CPoint point);
afx_msg void OnRButtonDown(UINT nFlags, CPoint point);
afx_msg void OnLinecolor();
afx_msg void OnFacecolor();
afx_msg void OnBezier();
//}}AFX_MSG
DECLARE_MESSAGE_MAP()
};

#ifndef _DEBUG // debug version in lab08View.cpp
inline CLab08Doc* CLab08View::GetDocument()
{ return (CLab08Doc*)m_pDocument; }
#endif

/////////////////////////////////////////////////////////////////////////////

//{{AFX_INSERT_LOCATION}}
// Microsoft Visual C++ will insert additional declarations immediately before the previous line.

#endif // !defined(AFX_LAB08VIEW_H__1A723E66_7056_44EF_8D71_FEB86DAE3AAF__INCLUDED_)



// lab08View.cpp : implementation of the CLab08View class
//

#include "stdafx.h"
#include "lab08.h"

#include "lab08Doc.h"
#include "lab08View.h"

#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif

/////////////////////////////////////////////////////////////////////////////
// CLab08View

IMPLEMENT_DYNCREATE(CLab08View, CView)

BEGIN_MESSAGE_MAP(CLab08View, CView)
//{{AFX_MSG_MAP(CLab08View)
ON_COMMAND(ID_LINE, OnLine)
ON_COMMAND(ID_ELLIPSE, OnEllipse)
ON_COMMAND(ID_RECTANGLE, OnRectangle)
ON_COMMAND(ID_POLY_RUBBER, OnPolyRubber)
ON_COMMAND(ID_POLY_NOTRUBBER, OnPolyNotrubber)
ON_WM_LBUTTONDOWN()
ON_WM_MOUSEMOVE()
ON_WM_LBUTTONUP()
ON_WM_RBUTTONDOWN()
ON_COMMAND(ID_LINECOLOR, OnLinecolor)
ON_COMMAND(ID_FACECOLOR, OnFacecolor)
ON_COMMAND(ID_BEZIER, OnBezier)
//}}AFX_MSG_MAP
// Standard printing commands
ON_COMMAND(ID_FILE_PRINT, CView::OnFilePrint)
ON_COMMAND(ID_FILE_PRINT_DIRECT, CView::OnFilePrint)
ON_COMMAND(ID_FILE_PRINT_PREVIEW, CView::OnFilePrintPreview)
END_MESSAGE_MAP()

/////////////////////////////////////////////////////////////////////////////
// CLab08View construction/destruction

CLab08View::CLab08View()
{
// TODO: add construction code here
m_nDrawMode = LINE_MODE;
m_bFirst = true;
m_bLButtonDown = false;
m_PenColor = RGB(0, 0, 0);
m_PenXORColor = RGB(255, 255, 255);
m_BeizerColor = RGB(100, 100, 100);
m_BrushColor = RGB(255, 255, 255);
m_BrushXORColor = RGB(0, 0, 0);
m_nCount = 0;
for ( int i=0 ; i<50 ; i++ ) m_ptData[i] = 0;

}

CLab08View::~CLab08View()
{
}

BOOL CLab08View::PreCreateWindow(CREATESTRUCT& cs)
{
// TODO: Modify the Window class or styles here by modifying
// the CREATESTRUCT cs

return CView::PreCreateWindow(cs);
}

/////////////////////////////////////////////////////////////////////////////
// CLab08View drawing

void CLab08View::OnDraw(CDC* pDC)
{
CLab08Doc* pDoc = GetDocument();
ASSERT_VALID(pDoc);

CPen pen, beizerpen, *oldpen;
pen.CreatePen(PS_SOLID, 1, m_PenColor);
beizerpen.CreatePen(PS_SOLID, 1, m_BeizerColor);

CBrush brush, *oldbrush;
brush.CreateSolidBrush(m_BrushColor);
pDC->SetROP2(R2_COPYPEN);
oldpen = pDC->SelectObject(&pen);
oldbrush = pDC->SelectObject(&brush);

switch(m_nDrawMode)
{
// 직선 그리기
case LINE_MODE:
// 마지막 직선 그림
pDC->MoveTo‎(m_ptStart);
pDC->LineTo(m_ptPrev);
break;

case ELLIPSE_MODE:
// 마지막 원을 그림
pDC->Ellipse(m_ptStart.x, m_ptStart.y, m_ptPrev.x, m_ptPrev.y);
break;

case RECTANGLE_MODE:
// 마지막 사각형을 그림
pDC->Rectangle(m_ptStart.x, m_ptStart.y, m_ptPrev.x, m_ptPrev.y);
break;

case POLY_RUBBER_MODE:
case POLY_NOTRUBBER_MODE:
// 배열에 저장한 순서대로 연결해 마지막 다각형을 그림
pDC->Polygon(m_ptData, m_nCount);
break;

case POLY_BEIZER_MODE:
pDC->SelectObject(GetStockObject(GRAY_BRUSH));
pDC->MoveTo‎(m_ptData[0]);
for(int i= 0; i < m_nCount; i++)
{
pDC->Ellipse(m_ptData[i].x-3, m_ptData[i].y-3, m_ptData[i].x+3, m_ptData[i].y+3);
}

// 배열에 저장한 순서대로 연결해 CONTROL POLYGON그림
pDC->Polyline(m_ptData, m_nCount);
// 배열에 저장한 순서대로 연결해 베지어 곡선 그림
pDC->SelectObject(beizerpen);
pDC->PolyBezier(m_ptData, m_nCount);
break;



}

pDC->SelectObject(oldpen);
pDC->SelectObject(oldbrush);
pen.DeleteObject();
brush.DeleteObject();
// TODO: add draw code for native data here
}

/////////////////////////////////////////////////////////////////////////////
// CLab08View printing

BOOL CLab08View::OnPreparePrinting(CPrintInfo* pInfo)
{
// default preparation
return DoPreparePrinting(pInfo);
}

void CLab08View::OnBeginPrinting(CDC* /*pDC*/, CPrintInfo* /*pInfo*/)
{
// TODO: add extra initialization before printing
}

void CLab08View::OnEndPrinting(CDC* /*pDC*/, CPrintInfo* /*pInfo*/)
{
// TODO: add cleanup after printing
}

/////////////////////////////////////////////////////////////////////////////
// CLab08View diagnostics

#ifdef _DEBUG
void CLab08View::AssertValid() const
{
CView::AssertValid();
}

void CLab08View::Dump(CDumpContext& dc) const
{
CView::Dump(dc);
}

CLab08Doc* CLab08View::GetDocument() // non-debug version is inline
{
ASSERT(m_pDocument->IsKindOf(RUNTIME_CLASS(CLab08Doc)));
return (CLab08Doc*)m_pDocument;
}
#endif //_DEBUG

/////////////////////////////////////////////////////////////////////////////
// CLab08View message handlers

void CLab08View::OnLine()
{
// TODO: Add your command handler code here
// 직선 그리기 모드 변경
m_nDrawMode = LINE_MODE;
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
// 그리기 모드 출력할 문자열 생성
m_strDrawMode = "직선 그리기";
// 상태바에 그리기 모드 출력
pFrame->m_wndStatusBar.SetWindowText(m_strDrawMode);

}

void CLab08View::OnEllipse()
{
// TODO: Add your command handler code here

// 원 그리기 모드 변경
m_nDrawMode = ELLIPSE_MODE;
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
// 원 그리기 모드 출력할 문자열 생성
m_strDrawMode = "원 그리기";
// 상태바에 그리기 모드 출력
pFrame->m_wndStatusBar.SetWindowText(m_strDrawMode);
}

void CLab08View::OnRectangle()
{
// TODO: Add your command handler code here
// 사각형 그리기 모드 변경
m_nDrawMode = RECTANGLE_MODE;
// 메일 프레임의 포인터 얻음
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
// 그리기 모드 출력할 문자열 생성
m_strDrawMode = "사각형 그리기";
// 상태바에 그리기 모드 출력
pFrame->m_wndStatusBar.SetWindowText(m_strDrawMode);

}


void CLab08View::OnPolyRubber()
{
// TODO: Add your command handler code here
// 다각형 그리기[러버밴드 사용] 모드 변경
m_nDrawMode = POLY_RUBBER_MODE;
// 메일 프레임의 포인터 얻음
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
// 그리기 모드 출력할 문자열 생성
m_strDrawMode = "다각형 그리기[러버밴드 사용]";
// 상태바에 그리기 모드 출력
pFrame->m_wndStatusBar.SetWindowText(m_strDrawMode);

}


void CLab08View::OnPolyNotrubber()
{
// TODO: Add your command handler code here
// 다각형 그리기[러버밴드 사용안함]모드 변경
m_nDrawMode = POLY_NOTRUBBER_MODE;
// 메일 프레임의 포인터 얻음
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
// 그리기 모드 출력할 문자열 생성
m_strDrawMode = "다각형 그리기[러버밴드 사용안함]";
// 상태바에 그리기 모드 출력
pFrame->m_wndStatusBar.SetWindowText(m_strDrawMode);

}

void CLab08View::OnLButtonDown(UINT nFlags, CPoint point)
{
// TODO: Add your message handler code here and/or call default

// 각 변수들을 초기화 => 화면을 초기화
if (m_bFirst)
{
m_ptStart = m_ptPrev = 0;
m_bLButtonDown = false;
m_bFirst = true;
m_nCount = 0;
for (int i=0 ; i<50 ; i++)
{
m_ptData[i]=0;
}
Invalidate(true);
}

CClientDC dc(this);
RECT rectClient;
CPen pen, *oldpen;
pen.CreatePen(PS_SOLID, 1, m_PenColor);
dc.SetROP2(R2_COPYPEN);
oldpen = dc.SelectObject(&pen);

switch(m_nDrawMode)
{
case LINE_MODE:
case ELLIPSE_MODE:
case RECTANGLE_MODE:
m_ptStart = m_ptPrev = point;
m_bLButtonDown = true;
m_bFirst = false;
break;

case POLY_RUBBER_MODE:
if (m_bFirst)
{
m_bFirst = false;
}

m_ptStart = m_ptPrev = point;
m_ptData[m_nCount] = point;
m_nCount++;
break;

case POLY_NOTRUBBER_MODE:
if (m_bFirst)
{
m_ptStart = point;
m_bFirst = false;
}
else
{
dc.MoveTo‎(m_ptStart);
dc.LineTo(point);
m_ptStart = point;
}
m_ptData[m_nCount] = point;
m_nCount++;
break;

case POLY_BEIZER_MODE:
if ( m_bFirst )
{
dc.SelectObject(GetStockObject(GRAY_BRUSH));
m_ptStart = m_ptPrev = point;
dc.Ellipse(point.x-3, point.y-3, point.x+3, point.y+3); // 마우스 클릭시 선택위치점을 원으로 표시
m_bFirst = false;
}
else
{
dc.SelectObject(GetStockObject(GRAY_BRUSH));
m_ptStart = m_ptPrev = point;
dc.Ellipse(point.x-3, point.y-3, point.x+3, point.y+3);
}
m_ptData[m_nCount] = point;
m_nCount++;
break;
}


SetCapture();

GetClientRect(&rectClient);
ClientToScreen(&rectClient);
::ClipCursor(&rectClient);

dc.SelectObject(oldpen);
pen.DeleteObject();

CView::OnLButtonDown(nFlags, point);
}

void CLab08View::OnMouseMove(UINT nFlags, CPoint point)
{
// TODO: Add your message handler code here and/or call default
CClientDC dc(this);
CPen pen, *oldpen;
pen.CreatePen(PS_SOLID, 1, m_PenXORColor);
CBrush brush, *oldbrush;
brush.CreateSolidBrush(m_BrushXORColor);
dc.SetROP2(R2_XORPEN);
oldpen = dc.SelectObject(&pen);
oldbrush = dc.SelectObject(&brush);

switch(m_nDrawMode)
{
case LINE_MODE:
if (m_bLButtonDown)
{
dc.MoveTo‎(m_ptStart);
dc.LineTo(m_ptPrev);
dc.MoveTo‎(m_ptStart);
dc.LineTo(point);
m_ptPrev = point;
}
break;

case ELLIPSE_MODE:
if (m_bLButtonDown)
{
// 이전 원을 지움
dc.Ellipse(m_ptStart.x, m_ptStart.y, m_ptPrev.x, m_ptPrev.y);
// 현재 원을 그림
dc.Ellipse(m_ptStart.x, m_ptStart.y, point.x, point.y);
m_ptPrev = point; //이전점에 현재점을 저장
}
break;

case RECTANGLE_MODE:
if (m_bLButtonDown)
{
// 이전 사각형을 지움
dc.Rectangle(m_ptStart.x, m_ptStart.y, m_ptPrev.x, m_ptPrev.y);
// 현재 사각형을 그림
dc.Rectangle(m_ptStart.x, m_ptStart.y, point.x, point.y);
m_ptPrev = point;
}
break;

case POLY_RUBBER_MODE:
if (!m_bFirst)
{
// 시작점에서 이전점까지 선을 지움
dc.MoveTo‎(m_ptStart);
dc.LineTo(m_ptPrev);
// 시작점에서 현재점까지 선을 그림
dc.MoveTo‎(m_ptStart);
dc.LineTo(point);
m_ptPrev = point;
}
break;
case POLY_BEIZER_MODE:
if(!m_bFirst)
{
dc.MoveTo‎(m_ptStart);
dc.LineTo(m_ptPrev);
dc.MoveTo‎(m_ptStart);
dc.LineTo(point);
m_ptPrev=point;
}
break;

}

dc.SelectObject(oldpen);
dc.SelectObject(oldbrush);
pen.DeleteObject();
brush.DeleteObject();

// 메인 프레임의 포인터 얻음
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
CString strPoint;
strPoint.Format("마우스 위치 X : %d, Y : %d", point.x, point.y);
// 새로 추가한 팬에 마우스 위치 출력
pFrame->m_wndStatusBar.SetPaneText(1, strPoint);

CView::OnMouseMove(nFlags, point);
}

void CLab08View::OnLButtonUp(UINT nFlags, CPoint point)
{
// TODO: Add your message handler code here and/or call default
if(m_bLButtonDown)
{
// 그리기 모드가 직선 그리기, 원그리기, 사각형 그리기이면
if (m_nDrawMode == LINE_MODE || m_nDrawMode == ELLIPSE_MODE ||
m_nDrawMode == RECTANGLE_MODE)
{
// 체크 변수 초기화 -> 다시 직선, 원, 사각형을 그리기 위해
m_bLButtonDown = false;
m_bFirst = true;
ReleaseCapture();
::ClipCursor(NULL);
Invalidate(true);
}
}

CView::OnLButtonUp(nFlags, point);
}

void CLab08View::OnRButtonDown(UINT nFlags, CPoint point)
{
// TODO: Add your message handler code here and/or call default

if (m_nDrawMode == POLY_RUBBER_MODE || m_nDrawMode == POLY_NOTRUBBER_MODE)
{
if (!m_bFirst)
{
// 배열에 현재점을 저장하고 카운트 증가
m_ptData[m_nCount] = point;
m_nCount++;
// 체크변수 초기화->다시 다각형을 그리기 위해
m_bFirst = true;
ReleaseCapture();
::ClipCursor(NULL);
Invalidate(true);
}
}
else if (m_nDrawMode == POLY_BEIZER_MODE)
{
CClientDC dc(this);

if (!m_bFirst)
{
dc.SelectObject(GetStockObject(GRAY_BRUSH));
dc.Ellipse(point.x-3, point.y-3, point.x+3, point.y+3);
dc.MoveTo‎(m_ptStart);
dc.LineTo(m_ptPrev);
m_ptStart = point;
m_ptData[m_nCount] = point;
m_nCount++;
int point_num = (m_nCount-1)%3;

if (point_num == 0)
{
m_bFirst = true;
ReleaseCapture();
::ClipCursor(NULL);
Invalidate(true);
}
else
{
AfxMessageBox("점의 수 오류 <점의 수 = 베이지 곡선수 * 3 +1>");
}
}
}

CView::OnRButtonDown(nFlags, point);
}

void CLab08View::OnLinecolor()
{
// TODO: Add your command handler code here
// 색상 다이얼로그의 인스턴스 생성
CColorDialog dlgColor;
// 색상 다이얼로그에서 색상을 선택하고 확인을 누르면
if (dlgColor.DoModal() == IDOK)
{
// 선택한 색상값을 얻어 PenColor에 설정
m_PenColor = dlgColor.GetColor();
COLORREF RedXORColor, GreenXORColor, BlueXORColor;
// XOR 연산후의 REd, Green, Blue 색상값을 구함
RedXORColor = GetRValue(m_PenColor)^255;
GreenXORColor = GetGValue(m_PenColor)^255;
BlueXORColor = GetBValue(m_PenColor)^255;
// XOR 현산후의 색상으로 변환
m_PenXORColor = RGB(RedXORColor, GreenXORColor, BlueXORColor);
Invalidate(true);
}

}

void CLab08View::OnFacecolor()
{
// TODO: Add your command handler code here
// 색상 다이얼로그의 인스턴스 생성
CColorDialog dlgColor;
// 색상 다이얼로그에서 색상을 선택하고 확인을 누르면
if (dlgColor.DoModal() == IDOK)
{
// 선택한 색상값을 얻어 PenColor에 설정
m_BrushColor = dlgColor.GetColor();
COLORREF RedXORColor, GreenXORColor, BlueXORColor;
// XOR 연산후의 REd, Green, Blue 색상값을 구함
RedXORColor = GetRValue(m_PenColor)^255;
GreenXORColor = GetGValue(m_PenColor)^255;
BlueXORColor = GetBValue(m_PenColor)^255;
// XOR 현산후의 색상으로 변환
m_BrushXORColor = RGB(RedXORColor, GreenXORColor, BlueXORColor);
Invalidate(true);
}

}

void CLab08View::OnBezier()
{
// TODO: Add your command handler code here
// 다각형 그리기[러버밴드 사용] 모드 변경
m_nDrawMode = POLY_BEIZER_MODE;
// 메일 프레임의 포인터 얻음
CMainFrame *pFrame = (CMainFrame *)AfxGetMainWnd();
// 그리기 모드 출력할 문자열 생성
m_strDrawMode = "베지어 곡선 그리기[러버밴드 사용]";
// 상태바에 그리기 모드 출력
pFrame->m_wndStatusBar.SetWindowText(m_strDrawMode);

}


// MainFrm.h : interface of the CMainFrame class
//
/////////////////////////////////////////////////////////////////////////////

#if !defined(AFX_MAINFRM_H__A67279F2_67A3_4727_AE66_F146301DC474__INCLUDED_)
#define AFX_MAINFRM_H__A67279F2_67A3_4727_AE66_F146301DC474__INCLUDED_

#if _MSC_VER > 1000
#pragma once
#endif // _MSC_VER > 1000

class CMainFrame : public CFrameWnd
{

protected: // create from serialization only
CMainFrame();
DECLARE_DYNCREATE(CMainFrame)

// Attributes
public:

// Operations
public:

// Overrides
// ClassWizard generated virtual function overrides
//{{AFX_VIRTUAL(CMainFrame)
virtual BOOL PreCreateWindow(CREATESTRUCT& cs);
//}}AFX_VIRTUAL

// Implementation
public:
virtual ~CMainFrame();
#ifdef _DEBUG
virtual void AssertValid() const;
virtual void Dump(CDumpContext& dc) const;
#endif

public: // control bar embedded members
CStatusBar m_wndStatusBar;
CToolBar m_wndToolBar;

// Generated message map functions
protected:
//{{AFX_MSG(CMainFrame)
afx_msg int OnCreate(LPCREATESTRUCT lpCreateStruct);
// NOTE - the ClassWizard will add and remove member functions here.
// DO NOT EDIT what you see in these blocks of generated code!
//}}AFX_MSG
DECLARE_MESSAGE_MAP()
};

/////////////////////////////////////////////////////////////////////////////

//{{AFX_INSERT_LOCATION}}
// Microsoft Visual C++ will insert additional declarations immediately before the previous line.

#endif // !defined(AFX_MAINFRM_H__A67279F2_67A3_4727_AE66_F146301DC474__INCLUDED_)


// MainFrm.cpp : implementation of the CMainFrame class
//

#include "stdafx.h"
#include "lab08.h"

#include "MainFrm.h"

#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif

/////////////////////////////////////////////////////////////////////////////
// CMainFrame

IMPLEMENT_DYNCREATE(CMainFrame, CFrameWnd)

BEGIN_MESSAGE_MAP(CMainFrame, CFrameWnd)
//{{AFX_MSG_MAP(CMainFrame)
// NOTE - the ClassWizard will add and remove mapping macros here.
// DO NOT EDIT what you see in these blocks of generated code !
ON_WM_CREATE()
//}}AFX_MSG_MAP
END_MESSAGE_MAP()

static UINT indicators[] =
{
ID_SEPARATOR, // status line indicator
ID_INDICATOR_CAPS,
ID_INDICATOR_NUM,
ID_INDICATOR_SCRL,
};

/////////////////////////////////////////////////////////////////////////////
// CMainFrame construction/destruction

CMainFrame::CMainFrame()
{
// TODO: add member initialization code here

}

CMainFrame::~CMainFrame()
{
}

int CMainFrame::OnCreate(LPCREATESTRUCT lpCreateStruct)
{
if (CFrameWnd::OnCreate(lpCreateStruct) == -1)
return -1;

if (!m_wndToolBar.CreateEx(this, TBSTYLE_FLAT, WS_CHILD | WS_VISIBLE | CBRS_TOP
| CBRS_GRIPPER | CBRS_TOOLTIPS | CBRS_FLYBY | CBRS_SIZE_DYNAMIC) ||
!m_wndToolBar.LoadToolBar(IDR_MAINFRAME))
{
TRACE0("Failed to create toolbar\n");
return -1; // fail to create
}

if (!m_wndStatusBar.Create(this) ||
!m_wndStatusBar.SetIndicators(indicators,
sizeof(indicators)/sizeof(UINT)))
{
TRACE0("Failed to create status bar\n");
return -1; // fail to create
}

// TODO: Delete these three lines if you don't want the toolbar to
// be dockable
m_wndToolBar.EnableDocking(CBRS_ALIGN_ANY);
EnableDocking(CBRS_ALIGN_ANY);
DockControlBar(&m_wndToolBar);

return 0;
}

BOOL CMainFrame::PreCreateWindow(CREATESTRUCT& cs)
{
if( !CFrameWnd::PreCreateWindow(cs) )
return FALSE;
// TODO: Modify the Window class or styles here by modifying
// the CREATESTRUCT cs

return TRUE;
}

/////////////////////////////////////////////////////////////////////////////
// CMainFrame diagnostics

#ifdef _DEBUG
void CMainFrame::AssertValid() const
{
CFrameWnd::AssertValid();
}

void CMainFrame::Dump(CDumpContext& dc) const
{
CFrameWnd::Dump(dc);
}

#endif //_DEBUG

/////////////////////////////////////////////////////////////////////////////
// CMainFrame message handlers



//{{NO_DEPENDENCIES}}
// Microsoft Developer Studio generated include file.
// Used by lab08.rc
//
#define IDD_ABOUTBOX 100
#define IDR_MAINFRAME 128
#define IDR_LAB08TYPE 129
#define ID_LINE 32773
#define ID_ELLIPSE 32778
#define ID_BUTTON32780 32780
#define ID_POLY_RUBBER 32781
#define ID_POLY_NOTRUBBER 32782
#define ID_LINECOLOR 32783
#define ID_FACECOLOR 32789
#define ID_RECTANGLE 32790
#define ID_BEZIER 32792

// Next default values for new objects
//
#ifdef APSTUDIO_INVOKED
#ifndef APSTUDIO_READONLY_SYMBOLS
#define _APS_3D_CONTROLS 1
#define _APS_NEXT_RESOURCE_VALUE 130
#define _APS_NEXT_COMMAND_VALUE 32793
#define _APS_NEXT_CONTROL_VALUE 1000
#define _APS_NEXT_SYMED_VALUE 101
#endif
#endif



###############################################################
######## 비트맵 애니메이션 #########
###############################################################

// lab10View.h : interface of the CLab10View class
//
/////////////////////////////////////////////////////////////////////////////

#if !defined(AFX_LAB10VIEW_H__B186CF0D_E4F9_11D6_A0C5_0050047F7A9C__INCLUDED_)
#define AFX_LAB10VIEW_H__B186CF0D_E4F9_11D6_A0C5_0050047F7A9C__INCLUDED_

#if _MSC_VER > 1000
#pragma once
#endif // _MSC_VER > 1000


class CLab10View : public CView
{
protected: // create from serialization only
CLab10View();
DECLARE_DYNCREATE(CLab10View)

// Attributes
public:
CLab10Doc* GetDocument();

// Operations
public:

// Overrides
// ClassWizard generated virtual function overrides
//{{AFX_VIRTUAL(CLab10View)
public:
virtual void OnDraw(CDC* pDC); // overridden to draw this view
virtual BOOL PreCreateWindow(CREATESTRUCT& cs);
protected:
virtual BOOL OnPreparePrinting(CPrintInfo* pInfo);
virtual void OnBeginPrinting(CDC* pDC, CPrintInfo* pInfo);
virtual void OnEndPrinting(CDC* pDC, CPrintInfo* pInfo);
//}}AFX_VIRTUAL

// Implementation
public:
void ShowAnimation();
int m_nBitmapMode;
virtual ~CLab10View();
#ifdef _DEBUG
virtual void AssertValid() const;
virtual void Dump(CDumpContext& dc) const;
#endif

protected:

// Generated message map functions
protected:
//{{AFX_MSG(CLab10View)
afx_msg void OnShowBitmap();
afx_msg void OnMagnifyBitmap();
afx_msg void OnReduceBitmap();
afx_msg void OnAnimationStart();
afx_msg void OnAnimationStop();
afx_msg void OnTimer(UINT nIDEvent);
//}}AFX_MSG
DECLARE_MESSAGE_MAP()
};

#ifndef _DEBUG // debug version in lab10View.cpp
inline CLab10Doc* CLab10View::GetDocument()
{ return (CLab10Doc*)m_pDocument; }
#endif

/////////////////////////////////////////////////////////////////////////////

//{{AFX_INSERT_LOCATION}}
// Microsoft Visual C++ will insert additional declarations immediately before the previous line.

#endif // !defined(AFX_LAB10VIEW_H__B186CF0D_E4F9_11D6_A0C5_0050047F7A9C__INCLUDED_)


// lab10View.cpp : implementation of the CLab10View class
//

#include "stdafx.h"
#include "lab10.h"

#include "lab10Doc.h"
#include "lab10View.h"

#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif

/////////////////////////////////////////////////////////////////////////////
// CLab10View

IMPLEMENT_DYNCREATE(CLab10View, CView)

BEGIN_MESSAGE_MAP(CLab10View, CView)
//{{AFX_MSG_MAP(CLab10View)
ON_COMMAND(ID_SHOW_BITMAP, OnShowBitmap)
ON_COMMAND(ID_MAGNIFY_BITMAP, OnMagnifyBitmap)
ON_COMMAND(ID_REDUCE_BITMAP, OnReduceBitmap)
ON_COMMAND(ID_ANIMATION_START, OnAnimationStart)
ON_COMMAND(ID_ANIMATION_STOP, OnAnimationStop)
ON_WM_TIMER()
//}}AFX_MSG_MAP
// Standard printing commands
ON_COMMAND(ID_FILE_PRINT, CView::OnFilePrint)
ON_COMMAND(ID_FILE_PRINT_DIRECT, CView::OnFilePrint)
ON_COMMAND(ID_FILE_PRINT_PREVIEW, CView::OnFilePrintPreview)
END_MESSAGE_MAP()

/////////////////////////////////////////////////////////////////////////////
// CLab10View construction/destruction

CLab10View::CLab10View()
{
// TODO: add construction code here

}

CLab10View::~CLab10View()
{
}

BOOL CLab10View::PreCreateWindow(CREATESTRUCT& cs)
{
// TODO: Modify the Window class or styles here by modifying
// the CREATESTRUCT cs

return CView::PreCreateWindow(cs);
}

/////////////////////////////////////////////////////////////////////////////
// CLab10View drawing

void CLab10View::OnDraw(CDC* pDC)
{
CLab10Doc* pDoc = GetDocument();
ASSERT_VALID(pDoc);
// TODO: add draw code for native data here

CDC memdc;
memdc.CreateCompatibleDC(pDC);
CBitmap bitmap, *oldbitmap;
bitmap.LoadBitmap(IDB_SINHO);
oldbitmap = memdc.SelectObject(&bitmap);

switch(m_nBitmapMode)
{
case 1:
pDC->BitBlt(0, 0, 123, 99, &memdc, 0, 0, SRCCOPY);
break;

case 2:
pDC->StretchBlt(0, 0, 123*2, 99*2, &memdc, 0, 0, 123, 99, SRCCOPY);
break;

case 3:
pDC->StretchBlt(0, 0, 123/2, 99/2, &memdc, 0, 0, 123, 99, SRCCOPY);
break;

case 4:
ShowAnimation();
break;
}

// DC를 복원
memdc.SelectObject(oldbitmap);

}

/////////////////////////////////////////////////////////////////////////////
// CLab10View printing

BOOL CLab10View::OnPreparePrinting(CPrintInfo* pInfo)
{
// default preparation
return DoPreparePrinting(pInfo);
}

void CLab10View::OnBeginPrinting(CDC* /*pDC*/, CPrintInfo* /*pInfo*/)
{
// TODO: add extra initialization before printing
}

void CLab10View::OnEndPrinting(CDC* /*pDC*/, CPrintInfo* /*pInfo*/)
{
// TODO: add cleanup after printing
}

/////////////////////////////////////////////////////////////////////////////
// CLab10View diagnostics

#ifdef _DEBUG
void CLab10View::AssertValid() const
{
CView::AssertValid();
}

void CLab10View::Dump(CDumpContext& dc) const
{
CView::Dump(dc);
}

CLab10Doc* CLab10View::GetDocument() // non-debug version is inline
{
ASSERT(m_pDocument->IsKindOf(RUNTIME_CLASS(CLab10Doc)));
return (CLab10Doc*)m_pDocument;
}
#endif //_DEBUG

/////////////////////////////////////////////////////////////////////////////
// CLab10View message handlers

void CLab10View::OnShowBitmap()
{
// TODO: Add your command handler code here
m_nBitmapMode = 1;
Invalidate();

}

void CLab10View::OnMagnifyBitmap()
{
// TODO: Add your command handler code here
m_nBitmapMode = 2;
Invalidate();

}

void CLab10View::OnReduceBitmap()
{
// TODO: Add your command handler code here
m_nBitmapMode = 3;
Invalidate();

}

void CLab10View::ShowAnimation()
{

static int bitmap_inc;
CClientDC dc(this);
CDC memdc;
memdc.CreateCompatibleDC(&dc);
CBitmap bitmap, *oldbitmap, bitmapMask, bitmapBack;

// 리소스에서 비트맵 읽기

bitmap.LoadBitmap(IDB_SINHO);
bitmapMask.LoadBitmap(IDB_MASK);
bitmapBack.LoadBitmap(IDB_BACK);


// 배경 출력
oldbitmap = memdc.SelectObject(&bitmapBack);
dc.BitBlt(0, 0, 256, 256, &memdc, 0, 0, SRCCOPY);

// 마스크 출력
memdc.SelectObject(&bitmapMask);
dc.BitBlt(80, 80, 41, 99, &memdc, 41*bitmap_inc, 0, SRCAND);
//dc.BitBlt(
// 비트맵 출력
memdc.SelectObject(&bitmap);
dc.BitBlt(80, 80, 41, 99, &memdc, 41*bitmap_inc, 0, SRCCOPY);

// 애니메이션 카운터 증가시킴
bitmap_inc++;
if ( bitmap_inc > 2 ) bitmap_inc = 0;

// DC를 복원
memdc.SelectObject(oldbitmap);


}

void CLab10View::OnAnimationStart()
{
// TODO: Add your command handler code here
SetTimer(0, 200, NULL); // 타이머설정
m_nBitmapMode = 4;
Invalidate();
}

void CLab10View::OnAnimationStop()
{
// TODO: Add your command handler code here
KillTimer(0);

}

void CLab10View::OnTimer(UINT nIDEvent)
{
// TODO: Add your message handler code here and/or call default
ShowAnimation();

CView::OnTimer(nIDEvent);
}


// MainFrm.h : interface of the CMainFrame class
//
/////////////////////////////////////////////////////////////////////////////

#if !defined(AFX_MAINFRM_H__B186CF09_E4F9_11D6_A0C5_0050047F7A9C__INCLUDED_)
#define AFX_MAINFRM_H__B186CF09_E4F9_11D6_A0C5_0050047F7A9C__INCLUDED_

#if _MSC_VER > 1000
#pragma once
#endif // _MSC_VER > 1000

class CMainFrame : public CFrameWnd
{

protected: // create from serialization only
CMainFrame();
DECLARE_DYNCREATE(CMainFrame)

// Attributes
public:

// Operations
public:

// Overrides
// ClassWizard generated virtual function overrides
//{{AFX_VIRTUAL(CMainFrame)
virtual BOOL PreCreateWindow(CREATESTRUCT& cs);
//}}AFX_VIRTUAL

// Implementation
public:
virtual ~CMainFrame();
#ifdef _DEBUG
virtual void AssertValid() const;
virtual void Dump(CDumpContext& dc) const;
#endif

protected: // control bar embedded members
CStatusBar m_wndStatusBar;
CToolBar m_wndToolBar;

// Generated message map functions
protected:
//{{AFX_MSG(CMainFrame)
afx_msg int OnCreate(LPCREATESTRUCT lpCreateStruct);
// NOTE - the ClassWizard will add and remove member functions here.
// DO NOT EDIT what you see in these blocks of generated code!
//}}AFX_MSG
DECLARE_MESSAGE_MAP()
};

/////////////////////////////////////////////////////////////////////////////

//{{AFX_INSERT_LOCATION}}
// Microsoft Visual C++ will insert additional declarations immediately before the previous line.

#endif // !defined(AFX_MAINFRM_H__B186CF09_E4F9_11D6_A0C5_0050047F7A9C__INCLUDED_)


// MainFrm.cpp : implementation of the CMainFrame class
//

#include "stdafx.h"
#include "lab10.h"

#include "MainFrm.h"

#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif

/////////////////////////////////////////////////////////////////////////////
// CMainFrame

IMPLEMENT_DYNCREATE(CMainFrame, CFrameWnd)

BEGIN_MESSAGE_MAP(CMainFrame, CFrameWnd)
//{{AFX_MSG_MAP(CMainFrame)
// NOTE - the ClassWizard will add and remove mapping macros here.
// DO NOT EDIT what you see in these blocks of generated code !
ON_WM_CREATE()
//}}AFX_MSG_MAP
END_MESSAGE_MAP()

static UINT indicators[] =
{
ID_SEPARATOR, // status line indicator
ID_INDICATOR_CAPS,
ID_INDICATOR_NUM,
ID_INDICATOR_SCRL,
};

/////////////////////////////////////////////////////////////////////////////
// CMainFrame construction/destruction

CMainFrame::CMainFrame()
{
// TODO: add member initialization code here

}

CMainFrame::~CMainFrame()
{
}

int CMainFrame::OnCreate(LPCREATESTRUCT lpCreateStruct)
{
if (CFrameWnd::OnCreate(lpCreateStruct) == -1)
return -1;

if (!m_wndToolBar.CreateEx(this, TBSTYLE_FLAT, WS_CHILD | WS_VISIBLE | CBRS_TOP
| CBRS_GRIPPER | CBRS_TOOLTIPS | CBRS_FLYBY | CBRS_SIZE_DYNAMIC) ||
!m_wndToolBar.LoadToolBar(IDR_MAINFRAME))
{
TRACE0("Failed to create toolbar\n");
return -1; // fail to create
}

if (!m_wndStatusBar.Create(this) ||
!m_wndStatusBar.SetIndicators(indicators,
sizeof(indicators)/sizeof(UINT)))
{
TRACE0("Failed to create status bar\n");
return -1; // fail to create
}

// TODO: Delete these three lines if you don't want the toolbar to
// be dockable
m_wndToolBar.EnableDocking(CBRS_ALIGN_ANY);
EnableDocking(CBRS_ALIGN_ANY);
DockControlBar(&m_wndToolBar);

return 0;
}

BOOL CMainFrame::PreCreateWindow(CREATESTRUCT& cs)
{
if( !CFrameWnd::PreCreateWindow(cs) )
return FALSE;
// TODO: Modify the Window class or styles here by modifying
// the CREATESTRUCT cs

return TRUE;
}

/////////////////////////////////////////////////////////////////////////////
// CMainFrame diagnostics

#ifdef _DEBUG
void CMainFrame::AssertValid() const
{
CFrameWnd::AssertValid();
}

void CMainFrame::Dump(CDumpContext& dc) const
{
CFrameWnd::Dump(dc);
}

#endif //_DEBUG

/////////////////////////////////////////////////////////////////////////////
// CMainFrame message handlers



//{{NO_DEPENDENCIES}}
// Microsoft Developer Studio generated include file.
// Used by lab10.rc
//
#define IDD_ABOUTBOX 100
#define IDR_MAINFRAME 128
#define IDR_LAB10TYPE 129
#define IDB_BACK 130
#define IDB_MASK 131
#define IDB_SINHO 132
#define ID_SHOW_BITMAP 32771
#define ID_MAGNIFY_BITMAP 32772
#define ID_REDUCE_BITMAP 32773
#define ID_ANIMATION_START 32774
#define ID_ANIMATION_STOP 32775

// Next default values for new objects
//
#ifdef APSTUDIO_INVOKED
#ifndef APSTUDIO_READONLY_SYMBOLS
#define _APS_3D_CONTROLS 1
#define _APS_NEXT_RESOURCE_VALUE 133
#define _APS_NEXT_COMMAND_VALUE 32776
#define _APS_NEXT_CONTROL_VALUE 1000
#define _APS_NEXT_SYMED_VALUE 101
#endif
#endif