<사용법>
1.기타잭을 사운드카드의 라인인이나 마이크 인에 꽂는다.
2.라인인에 꽂았으면 라인인의 녹음 설정을 On으로, 마이크인에 꽂았으면 마이크 인의 녹음설정을 On으로 하고 나서 프로그램을 실행하면 화면에 튜닝상태가 나타난다.
<기타 튜닝기 사용법>
> daesein guitar tuner를 다운받아 설치했는데 자세한 사용법을 알고 싶습니다.
> 녹음설정을 on으로 하라고 했는데 녹음설정은 어떻게 하는지?
> 튜너기 보는 방법도요 알고싶어요
Re.........기타 튜닝기는 앰프기타나 앰프에 끼울 수 있는 잭이 있는 기타에 사용하는 것입니다.
자세한 사용법은 아래 적었습니다.
영문이므로 오랜만에 영어 공부한다고 생각하시고 해석해서 보세요.
뭐.... 번역프로그램을 이용해서 번역하셔도 되고요.
Please read the warning and disclaimer . By using this software, you immediately accept the conditions of the disclaimer.
Quick Start:
1.) Make sure the microphone is connected to the sound card.
2.) Go to the Edit menu and select Volume....
3.) Set the "main" or "master" volume to a small value in the range of 15 to 75.
4.) Set the "mic" or "microphone" level to the maximum value "255." If you hear a roar of feedback, you need to lower the "master" or "main" volume.
5.) Select the "Save" button to store your input/output levels.
6.) Strike the (high) first string E on your guitar. If the needle lands to the left and stays there, you are flat of the note shown directly beneath the needle. The string is in tune when the needle centers to the exact middle and turns white.
7.) When ready to end your tuning session, select File | Exit from the menu bar.
The Contents page links all available help information.
See also: The Noise Gate
A good mic
The Needle Gauge
Volume
Trouble-Shooting:
Always use the tuner's mixer when the tuner is running.
If the tuner is not sensitive enough or if it seems to drop off too quickly, decrease the "User Controlled" value under "Edit | Noise Gate..."and save your settings.
If the response is slow, make sure that Windows 95 virtual memory is not running. Also check the System Requirements.
If you have never used this software program, please read the Introduction.
You can keep this Help window from popping up every time you start the program by registering the software.
첫댓글 다운은 받았는데 어떻게 사용하지는 잘 모르겠습니다.