저희 카페 회원분이 일전에 사용하시던 기종으로 자료로 가지고 계신 사진 보내 주셔서 감사히 공유 합니다.
메이커 소개 자료를 역시 영문과 구글의 힘을 빌린 한글 두가지로 올려 드립니다.
A record player with high C/P by inheriting the technology obtained in GT-2000.
A 36 cm diameter, 3 kg weight, high precision aluminum die cast turntable is used for the turntable. Combined with a 400g SBR sheet with good adsorption, inertial mass 600kg/cm2For the first time.
The drive uses a direct drive system using a DC coreless Hall motor with a starting torque of 1.2 kg ・ cm and a quartz PLL system to achieve rotational accuracy of 20 ppm or less compared to the crystal oscillation level.
A 10 mm diameter motor shaft is used to support the turntable.
A virtual one point support gimbal support arm is used to support the arm. This system has a structure in which the pivot is received by an angular contact bearing and the bearing is supported by a rubber bush. It eliminates play and achieves a horizontal and vertical initial motion sensitivity of 7 mg.
The arm is an S-shaped light heavy arm made of aluminum. By making it a long arm with an effective length of 262 mm, the S-shaped wake can be made small and the horizontal tracking error is kept within a narrow range.
A thread suspension type is adopted for the anti-skating mechanism.
Zinc die-cast is used for the arm base.
The cabinet is a 115 mm thick cabinet with a weight of 13.4 kg using a five layer structure of high-density particle board including one 20 mm thick bottom plate.
As a separately sold option, the tone arm YSA-1 adopted in the GT-2000X and the straight arm YSA-2 produced in limited quantity can be equipped.
Non-contact optical auto lifter YAL-1 can be used.
Anchor block YAB-1 can be used.
YAB-1 is a set of 2 dumbbell weights connected by a horizontal bar, and 1 set is 32 kg in weight.
In addition, it comes with a spring-rubber compound foot with height adjustment mechanism that can be used by players other than GT series players.
Disk stabilizer YDS-3 can be used.
The YDS-3 has a double structure consisting of a brass ground metal part and an African paddock wood part. You can enjoy the change of sound by using both parts separately.
74 mm φ x34mm aluminum / brass composite disk stabilizer YDS-8 can be used.
Pinpoint block YPB-1 can be used.
YPB-1 is a brass machined pinpoint block that can support GT players, speakers and amplifiers with points.
Disk stabilizer YDS-1 can be used.
The YDS-1 is an electric pump type record adsorption system using a brass milling machine. In principle, it can exhibit the power equivalent to increasing the record weight to 4.5 kg.
GT-2000에서 얻은 기술을 계승하여 높은 C/P를 가진 레코드 플레이어.
직경 36cm, 무게 3kg의 고정밀 알루미늄 다이캐스트 턴테이블이 턴테이블에 사용됩니다. 흡착력이 좋은 400g SBR 시트와 결합, 관성 질량 600kg/cm 2 최초.
드라이브는 기동 토크 1.2kg·cm의 DC 코어리스 홀 모터와 쿼츠 PLL 방식을 사용한 다이렉트 드라이브 방식을 채용해 수정 발진 레벨 대비 20ppm 이하의 회전 정도를 실현했다.
직경 10mm의 모터 축이 턴테이블을 지지하는 데 사용됩니다.
가상 원포인트 지지 짐벌 지지 암이 암을 지지하는 데 사용됩니다. 피봇은 앵귤러 컨택트 베어링으로 받치고 고무 부시로 베어링을 지지하는 구조입니다. 유격을 제거하고 7mg의 수평 및 수직 초기 동작 민감도를 달성합니다.
암은 알루미늄제의 S자형 경량 암입니다. 유효 길이 262mm의 긴 암으로 함으로써 S자 후류를 작게 할 수 있고, 수평 추종 오차를 좁은 범위로 억제할 수 있습니다.
안티스케이팅 기구에는 스레드 서스펜션 타입을 채용.
암 베이스에는 아연 다이캐스트를 사용.
캐비닛은 두께 115mm, 무게 13.4kg의 캐비닛으로 20mm 두께의 바닥판 1개를 포함하는 고밀도 파티클 보드의 5층 구조를 사용합니다.
별매 옵션으로 GT-2000X에 채용된 톤암 YSA-1과 한정 수량 생산된 스트레이트 암 YSA-2를 장착할 수 있습니다.
비접촉식 광학 자동 리프터 YAL-1을 사용할 수 있습니다.
앵커 블록 YAB-1을 사용할 수 있습니다.
YAB-1은 덤벨 웨이트 2개를 가로봉으로 연결한 세트로 1세트 무게는 32kg이다.
또한 GT 시리즈 플레이어 이외의 플레이어도 사용할 수 있는 높이 조절 장치가 있는 스프링 고무 복합 다리가 함께 제공됩니다.
디스크 안정제 YDS-3을 사용할 수 있습니다.
YDS-3는 황동 접지 금속 부분과 아프리칸 패독 우드 부분으로 구성된 이중 구조를 가지고 있습니다. 두 부분을 따로 사용하여 소리의 변화를 즐길 수 있습니다.
74mm φ x34mm 알루미늄 / 황동 복합 디스크 스태빌라이저 YDS-8 사용 가능.
핀포인트 블록 YPB-1을 사용할 수 있습니다.
YPB-1은 포인트로 GT 플레이어, 스피커, 앰프를 지원할 수 있는 황동 가공된 핀포인트 블록입니다.
디스크 안정제 YDS-1을 사용할 수 있습니다.
YDS-1은 황동 밀링머신을 이용한 전기펌프 방식의 기록 흡착 시스템입니다. 원칙적으로는 기록 중량을 4.5kg까지 올리는 것과 같은 위력을 발휘할 수 있다.
Type | Record player |
Arm type | Static balance type S-shaped arm |
Arm shaft | 27 mm φ |
Effective arm length | 262mm |
Arm initial motion sensitivity | 7 mg (horizontal / vertical) |
Applicable Cartridge Weight Range | 3g ~ 12g (when using 14g of attached shell) |
Arm support | Virtual one point support gimbal support system |
Drive system | Direct drive |
Servo system | Quartz PLL system |
Motor | DC coreless Hall motor |
Turntable | 36 cm Aluminum Die-cast, 3 kg |
Moment of inertia | 600kg/cm2 |
Wow flutter | 0.006% or Less (FG Direct Reading) |
Signal-to-noise ratio | 82dB(DIN-B) |
Cabinet | 5-Layer High Density Particle Board |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | 5W |
External dimensions | Width 532x Height 220x Depth 388 mm |
Weight | 22.0kg |
Sold Separately | Auto Lifter YAL-1 (¥ 9,000) Disc Stabilizer YDS-1 (¥ 60,000) Tone Arm YSA-1 (¥ 40,000) Tone Arm YSA-2 (limited product, ¥ 60,000) |
Sold Separately : Anchor Block YAB-1 (¥ 90,000) |
Weight | 32kg |
Sold Separately : Stabilizer YDS-3 (¥ 8,500) |
External dimensions | Diameter 70x height 32 mm |
Weight | 680g |
Sold Separately : Disc Stabilizer YDS-8 |
External dimensions | Diameter 74x height 34 mm |
Weight | 850g |
Sold Separately : Pinpoint Block YPB-1 (1 set of 4, ¥ 30,000) |
Weight | 1.5 kg (1 piece) |
별매 악세서리 제품들 입니다.