백 종 배 (Baek Jong-Bae)
▶ 주요 관심 분야
- Quantitative Risk Control
- Safety Climate Measurement & Implementation
- Chemical Process Safety
▶ 주요경력
- 1996.08 ~ 현 재 : 한국교통대학교 안전공학전공 교수
- 2019.03 ~ 현 재 : International Congress on Modelling and Simulation, Session Organizer
- 2022.02 ~ 현 재 : 한국안전학회 회장
- 1996.08 ~ 2022.01 : 한국안전학회 부회장
- 2017.01 ~ 2018.06 : 한국교통대학교 산학협력단장
- 2007.07 ~ 2009.04 : 한국교통대학교 학생지원처 처장, 센터장
- 2005.12 ~ 2006.12 : University of North Texas, (Public Health Science Center) Visiting Faculty
- 1996.02 ~ 1996.08 : 한국과학기술원 선임연구원
▶ 주요 위원회 활동
- 2022.02 ~ 현 재 : 한국가스안전공사 가스용품 검사판정위원회 위원
- 2022.02 ~ 현 재 : 한국가스안전공사 기술위원회 위원
- 2021.12 ~ 현 재 : 한국가스안전공사 가스안전 기술심의위원회 위원
- 2021.11 ~ 현 재 : 한국가스안전공사 수소안전 커뮤니케이터
- 2021.10 ~ 현 재 : 수소충전소 안전성평가 자문 위원회 위원
- 2021.07 ~ 현 재 : 가스기술기준위원회 가스기술기준 자문 위원회 위원
- 2021.07 ~ 현 재 : 화학물질안전원 화학사고 조사 위원회
- 2019.09 ~ 현 재 : 안전보건공단 교과과정심의위원회
- 2019.06 ~ 현 재 : 과학기술정보통신부 연구실안전심의위원회 위원
- 2019.04 ~ 현 재 : 환경부 화학물질관리위원회 위원
- 2018.04 ~ 현 재 : 한국가스안전공사 사고조사전문위원회 위원
- 2017.11 ~ 현 재 : 고용노동부 정책자문위원회 위원
- 1996.08 ~ 현 재 : 고용노동부 산업재해보상보험 및 예방심의위원회 전문위원회 위원
- 2019.12 ~ 2021.04 : 안전보건공단 공공기관 안전활동 수준평가 평가위원
- 2018.09 ~ 2020.09 : 화학물질안전원 안전성평가심의위원회 위원
- 2015.11 ~ 2016.09 : 대통령직속 산업안전혁신위원회 위원
- 2015.03 ~ 2020.11 : 행정안전부 중앙합동평가단 평가위원
- 2013.03 ~ 2015.03 : 안전보건공단 사고조사위원회 위원
- 2012.03 ~ 2013.03 : 대통령직속 경제사회발전노사정위원회 공익대표
- 2012.04 ~ 2013.04 : 안전보건공단 리스크관리 기술지침 제정위원회 위원장
- 2010.07 ~ 2014.06 : 고용노동정책평가위원회 위원
- 2005.04 ~ 2021.08 : 안전보건공단 공정안전보고서 심사위원
▶ 주요연구업적
[학술저서]
- 백종배 외5, 화학공정안전, 동화기술, 2020
- 백종배 외5, 스마트공장 안전성 확보 기술, 동화기술, 2019
[학술논문]
- Myung Chul Kim, Jong-Bae Baek, Priority Analysis of Cause Factors of Safety Valve Failure Mode Using Analytical Hierarchy Process, Journal of Korean chemical engineering research, Vol.60, No.3, pp.347-355, 2022
- Mi Jeong Lee, Jong-Bae Baek, The Factor Analysis for Acceptance on Hydrogen Refueling Station Using Structure Equation Model, Journal of Korean chemical engineering research, Vol.60, No.3, pp.356-362, 2022
- Jong-Gwon Woo, Mi jeong Lee, Mun Su Seol, Jong-Bae Baek, A case study on the estimation of the risk based on statistics, Journal of the Korean Institute of Hazardous Materials, Vol.36, No.4, pp.80-87, 2021
- Hyun-Gil Kwon, Sang Ryung Kim, Jong-Bae Baek, A study on the gas-liquid separation effect of the knockout drum in the flare system, Journal of the Korean Institute for gas, Vol.25, No.3, pp.1-8, 2021
- Pil-rae Cho, Jong-Bae Baek, Optimization of Release Modeling for the Natural Gas Piping by Using ALOHA Program, Journal of the Korean Institute of Hazardous Materials, Vol.8, No.2, pp.37-44, 2020
- Pil-rae Cho, Jong-Bae Baek, Study on the application of flammable liquids of KS C IEC 60079-10-1:2015 Standard based on the flash points, Journal of the Korean Institute of Hazardous Materials, Vol.8, No.2, pp.45-54, 2020
- Dong-Yeon Joo, Jae Min Seo, Myung-Chul Kim, Jong-Bae Baek, Efficient Management of the pH of the Wet Scrubber Washing Water for Risk Mitigation, Journal of the Korean Society of Safety, Vol.35, No.6, pp.85-92, 2020
- Gun Moon Na, Jae Min Seo, Mi Jeong Lee, Jong-Bae Baek, Case Study on Advanced Fire and Explosion Index, Journal of the Korean Society of Safety, Vol.35, No.6, pp.78-84, 2020
- Jeong Jae Woo, Min Hwan Kim, Chang Yeop Chu, Jong-Bae Baek, Synthesizing Failure Data of Pump in PCB Manufacturing using Bayesian Method, Journal of the Korean Society of Safety, Vol.35, No.1, pp.79-86, 2020
- Pil-rae Cho, Hyang-jig Lee, Jong-Bae Baek, Study on the Negligible Extent(NE) and Release Characteristic of KS C IEC 60079-10-1(2015) Standard, Journal of the Korean Society of Safety, Vol.35, No.2, pp.111-117, 2020
- Chang-Yeop Chu, Jong-Bae Baek, The Safety Design of Corrosive Chemical Handling Process based on Reliability Database, Journal of the Korean Society of Safety, Vol.33, No.5, pp.141-149, 2019
- Jung-chul Park, Jong-Bae Baek, et al. A Study on the Analysis of Human-errors in Major Chemical Accidents in Korea, Journal of the Korean Society of Safety, Vol.33, No.1, pp.66-72, 2018
- Woosoo Choi, Jong-Bae Baek, Risk Analysis of Off-site Risk Assessment using Vulnerability by Environmental Medium, Journal of the Korean Society of Safety, Vol.33, No.5, pp.150-156, 2018
- Chang-Yeop Chu, Jong-Bae Baek, The Safety Design of Corrosive Chemical Handling Process based on Reliability Database, Journal of the Korean Society of Safety, Vol.33 No.5, pp.141-149, 2018
[학술대회 발표]
- Jung Hwang Shin, Jong-Bae Baek, Estimation of Risk Mitigation Rate according to Reduction Measures using Bayesian Networks, Korean Society of Safety, 2022
- Suk hyun Hong, Jong-Bae Baek, A Study on the Safety Performance Criteria of the Assembly Through the Correlation Between the Performance of Temporary Equipment and the Performance of the Assembly, Korean Society of Safety, 2022
- Seon Yeong Ha, Jong-Bae Baek, Derivation of Main Causes of Near-miss Accidents using Bayesian Network, Korean Society of Safety, 2022
- Sujin Gu, Jong-Bae Baek, et al, Exploring the Relationships between Automated Transport and Intention to use a Shared Autonomous Vehicle Experience from Chungju, Korea, Korean Society of Safety, 2022
- Bong Sun Choi, Sung Hee Lee, Jong-Bae Baek, A Study on Classification of Explosion Hazardous Area in FAB Facilities, Korean Society of Safety, 2022
- Mi Jeong Lee, Jong-Bae Baek, et al, A Study on the Suitability Evaluation of Exhaust Gas Ventilation of Fabrication Facilities – SEMI S6 Tracer Gas Test, Korean Society of Safety, 2022
- Nak Won Jo, Sung Hee Lee, Jong-Bae Baek, 3D Computational Fluid Dynamics for Fire and Explosion Safety Analysis of FAB Process Facility, Korean Society of Safety, 2022
- Choongsik Kim, Jong-Bae Baek, et al, A Study on the Risk Analysis Using Bayesian Network for Bio Pharmaceutical Company Process with Ethanol, Korean Society of Safety, 2022
- Jong-Gwon Woo, Jong-Bae Baek, et al, A Case Study on the Estimation of the Risk based on Statistics, Korean Society of Safety, 2021
- Jung Hwang Shin, Jong-Bae Baek, Developing Protection Factor for Estimating Risk Mitigation Rate of Risk Reduction Measures using Causal Inference Modeling, Korean Society of Safety, 2021
- Mi Jeong Lee, Jong-Bae Baek, et al, Reliability Analysis of Gas Turbine in Combined Cycle Power Plant using Bayesian Networks, Korean Society of Safety, 2021
- Myung-Il Kim, Jong-Bae Baek, et al, A study on Damaged Characteristics and Safety Standards Calculation Method by Strong Winds in Tornado Occurrence, Korean Society of Safety, 2021
- Kwang Soo Park, Jong-Bae Baek, et al, Study on Calculation of Ventilation Velocity based on Gas Leak CFD Simulation inside CVD Gas Box, Korean Society of Safety, 2021
- Seon Yeong Ha, Jong-Bae Baek, Hazard Analysis of Autonomous Vehicle Accident Using Statistical Inference Methods, Korean Society of Safety, 2021
- Dal-sik Kim, Jong-Bae Baek, et al, Improvement of Reliability for Ignition Device in Gas Turbine, Korean Society of Safety, 2021
- Jeong Woon Lim, Jong-Bae Baek, A Study on the Improvement of the Domestic Railroad Safety Certification System through the Analysis of the Overseas Railroad Safety Certification System, Korean Society of Safety, 2021
- Mi Jeong Lee, Jong-Bae Baek, Factor analysis on hydrogen charging station acceptance using structural equation model, Korean Institute of Chemical Engineers, 2021
- Seon Yeong Ha, Jong-Bae Baek, et al, Comparison and analysis of modeling with and without a hydrogen station construction plan, Korean Institute of Gas, 2021
- Si Hag Lyu, Jong-Bae Baek, Study on Industrial Disaster Prevention of Railway Drivers, Korean Society of Safety, 2021
- Hyun Gil Kwon, Jong-Bae Baek, et al, Gas/liquid Separation Effect of Knockout Drum according to the Long Distance and Diameter Change of the Flare Header, Korean Society of Safety, 2021
- Mi Sun Kim, Jong-Bae Baek, Study for the Basic Data Analysis for the Prevention and Management of Musculoskeletal Disease Development of Shunting Staff, Korean Society of Safety, 2021
- Si Hyung Park, Jong-Bae Baek, Acetic Acid Mixture (MAE, Wright Etchant) A study on the Determination of Flammability through Flash Point Prediction, Korean Society of Safety, 2021
- Gang Nam Ju, Jong-Bae Baek, A Case Study on the Treatment of Flammable Exhaust Gases in CVD Facilities, Korean Society of Safety, 2021
- Myung-Chul Kim, Jong-Bae Baek, et al, Prioritization of Risk Factors for failure mode of Pressure Safety Valve (PSV) Using Analytical Hierarchy Process(AHP), Korean Society of Safety, 2021
- Jin Wook Kim, Jong-Bae Baek, A study on the Method of Calculating the Safety Level for Laboratories, Korean Society of Safety, 2021
- Kyung-Rae Kim, Jong-Bae Baek, et al, Improvement Measrues to Reduce Risk of Railroad Workers, Korean Society of Safety, 2020
- Mi Jeong Lee, Jong-Bae Baek, et al, Factor Analysis for Tolerable Risk on Hydrogen Fueling Station, Korean Society of Safety, 2020
- Hyeon-Gil Kwon, Jong-Bae Baek, et al, A Study on Efficient Implementation to Hazard Identification for Work, Korean Society of Safety, 2020
- Jong Bog You, Jong-Bae Baek, et al, A Study on the Occurrence Characteristics of Casualty Accident in Railway Workers Using ANOVA, Korean Society of Safety, 2020
- Mi Jeong Lee, Jong-Bae Baek, et al, Analysis of the Factors Affection Acceptance of Hydrogen Station, Korean Society of Safety, 2020
- Mi Jeong Lee, Jong-Bae Baek, et al, Life prediction and verification of degradation mechanism of gasket for corrosive materials in PCB Manufacturing Process, 23rd International Congress on Modelling and Simulation, 2019
- Chang-Yeop Chu, Jong-Bae Baek, et al, Life Prediction and Verification of Degradation Mechanism of Gasket for Corrosive Materials in PCB Manufacturing Process, Korean Society of Safety, 2019
- Mi Jeong Lee, Jong-Bae Baek, et al, Risk Analysis for Onboard Hydrogen Storage on Hydrogen Fueled Car, Korean Society of Safety, 2019
- Joon Sung Kim, Jong-Bae Baek, et al, A Study on the Need for Process Safety Report Resubmission System, Korean Society of Safety, 2019
- Namsik Kang, Jong-Bae Baek, et al, A case Study on Development and Application of Protective Wearing Standards for Semiconductor Bump Processes, Korean Society of Safety, 2019
- Myung-Chul Kim, Jong-Bae Baek, et al, Comparison of Methodology for Gas Detector Placement, Korean Society of Safety, 2019
- Jae-Min Seo, Jong-Bae Baek, et al, A study on the Safety Integrity Level Design of Conveyor, Korean Society of Safety, 2019
- Mi Jeong Lee, Jong-Bae Baek, et al, Estimation of Workplace failure data using Bayesian Method and Monte Carlo Simulation, Asia Pacific Symposium on Safety, 2019
- Mi Jeong Lee, Jong-Bae Baek, et al, Development of Model based safety assessment for Smart Factory, International Occupational Ergonomics and Safety Conference, 2019
- Mi Jeong Lee, Jong-Bae Baek, et al. Development of Model based Safety Assessment for Smart Factory, Korean Society of Safety, 2019
- Su-Ya Jeon, Jong-Bae Baek, et al. A Study on the Modification of the Laboratory Scopes for Precise Safety Diagnosis, Korean Society of Safety, 2019
- Bong-Sun Choi, Jong-Bae Baek, et al. Safety Protection Measures from Flare Stack Through QRA, Korean Society of Safety, 2019
- Dong-yeon Joo, Jong-Bae Baek, et al. Improvement of Effective Management of Wet Scrubber Storage Water PH, Korean Society of Safety, 2019
- Hyo-won Lee, Jong-Bae Baek, et al. Analysis of the Relationship between Safety Climate and First Aid Cases of Workplace, Korean Society of Safety, 2019
- Young Sik Park, et al. Jong-Bae Baek, Risk Analysis Research by Unrealistic Main Operations of Manufacturing Supervisor, Korean Society of Safety, 2019
- Seung-Gyu Park, Jong-Bae Baek, A Study on the Cause Analysis of Explosion from Reactive Materials and the Application of MSDS for the Risk Management, Korean Society of Safety, 2019
- Myung-chul Kim, Jong-Bae Baek, et al. Optimal Placement of Hazardous Gas Detector for Risk Management, Korean Society of Safety, 2019
- Gun Moon Na, Jong-Bae Baek, Simplified Quantitative Analysis in Small Scale Chemical Plants, Korean Society of Safety, 2019
- Hyun Koo Kang, Jong-Bae Baek, et al. A Study on Establishment of Optimum Maintenance Cycle of Diesel Locomotive Main Equipment Using EWMA, Korean Society of Safety, 2019
- Su Ya Jeon, Jong-Bae Baek, Analysis of Safety Culture and Accident Rate in Workplace, Applied Human Factors and Ergonomics, 2018
- Ok-Gu Ju, Jong-Bae Baek, Comparison between Korean process safety management and United States of America, risk based process safety, Applied Human Factors and Ergonomics, 2018
- Su-Ya Jeon, Jong-Bae Baek, et al. The Change of Specifications with Introduction of Smart Factory, Korean Society of Safety, 2018
- Pil-Rae Cho, Jong-Bae Baek, et al. Study for the Releases Modeling of Atural Gas Piping by using ALOHA Program, Korean Society of Safety, 2018
- Seung-Gyu Park, Jong-Bae Baek, Status of Legal System of Prevention from Chemical Accident and Risk Control of Civil Area from Major Hazard Installations, Korean Society of Safety, 2018
- Chang-Yeop Chu, Jong-Bae Baek, Thermal Stability Analysis of Fume Generated in PCB Drying Process, Korean Society of Safety, 2018
- Seung-Gyu Park, Jong-Bae Baek, Status of Process Safety Management and Chemical Safety in Semiconduct Industries, Korean Society of Safety, 2018
- Geon-Pil Park, Jong-Bae Baek, et al. A Study on the Development of Standard Checklist Based on Periodic Inspection Checklist for Laboratory Safety, Korean Society of Safety, 2018
- Mi Jeong Lee, Jong-Bae Baek, et al. Safety Climate of Business and Relational Analysis of Accident Rate, Korean Society of Safety, 2018
- Eun Si Bae, Jong-Bae Baek, et al. A Study on the Improvement of Laboratory Safety Management Supervision Through Analyzing Accident, Korean Society of Safety, 2018
- Jung-Pil Kim, Tae-Woong Kim, Jong-Bae Baek, Risk Management Method of Inflow Transfermer Using Gas Analysis Method(DGA), Korean Society of Safety, 2018
- Ok-gu Ju, Jong-Bae Baek, et al. Experiment of Leakage Distance about Dike Installation Criteria, Korean Society of Safety, 2018
- Jin-Seon Lee, Jong-Bae Baek, Safety Consciousness Measurement of Scaffold Worker in Construction Site, Korean Society of Safety, 2018
- Seung-Deok Seo, Jong-Bae Baek, Risk Analysis of Safety for Small LPG Storage Tank, Korean Society of Safety, 2018
- Hyung-Sub Lee, Jong-Bae Baek, et al. A Study on Risk of Operation a Forklift and its Reducing Measures, Korean Society of Safety, 2018
- Hee Yeon Lee, Jong-Bae Baek, Improvement of Domestic Safety Certification System for Industrial Machinery : Focusing on efficiency, Korean Society of Safety, 2018
- Pil-Rae Cho, Jong-Bae Baek, et al. Study for Determining Hazardous Distances, Korean Society of Safety, 2018
- Hyung Jun Jeon, Jong-Bae Baek, et al. A study on the Legal Deregulation for Low-risk Laboratories, Korean Society of Safety, 2018
- Hyun-Gil Kwon, Jong-Bae Baek, et al. A Study on Characteristics of Dust Explosion for LDPE, Korean Society of Safety, 2018
- Pil-Rae Cho, Jong-Bae Baek, et al. Study for Guideline of Non-destructive Testing for Piping, Korean Society of Safety, 2018
▶ 기타
- 2016.07 : 국무총리 표창 (국가산업발전)