If you cannot see this FAQ properly, please click here to view it in your default web browser.
![GRAITEC: CAD, Structural Analysis and Design Integration](https://img1.daumcdn.net/relay/cafe/original/?fname=http%3A%2F%2Fwww.graitec.com%2Fen%2Fimages%2Fadvantages_FAQ_header.jpg)
Advance Steel FAQ
Subscribe to GRAITEC Advantage - FAQ feed
-
Software:
Advance Steel -
Module:
Detailing -
Question:
How is a detail drawing header modified? -
Type:
Creation of documents -
Difficulty:
**
Answer
In order to change the detail drawing header you must complete the following steps:
1. Open the desired prototype. This is stored in the following path:
C:\Documents and Settings\AllUsers\Application Data\Graitec\AdvanceSteel\2010\Shared\Support\Prototypes.
2. Type "BEDIT" on the command line and press "Enter". A dialog box, as shown in the following figure, will appear where you should select "HYPERSTEELPAGEHEADER" and click "OK".
C:\Documents and Settings\AllUsers\Application Data\Graitec\AdvanceSteel\2010\Shared\Support\Prototypes.
2. Type "BEDIT" on the command line and press "Enter". A dialog box, as shown in the following figure, will appear where you should select "HYPERSTEELPAGEHEADER" and click "OK".
3. Make the desired modifications.
4. "Save and exit" the editing.
4. "Save and exit" the editing.
5. Type "ATTSYNC" on the command line and press "Enter". Choose "select" and pick the block that you modified, and then press "enter" when asked for "HYPERSTEELPAGEHEADER".
The header is updated with the modifications.
These modifications do not apply to the existing drawings; the existing drawings must be recreated with the edited prototype.
These modifications do not apply to the existing drawings; the existing drawings must be recreated with the edited prototype.
Information contained in this e-mail are reserved to GRAITEC Advantage subscribers. Any re-use is forbidden without a previous written agreement from GRAITEC.
If you no longer wish to receive Advance Steel FAQs, click here.
If you no longer wish to receive Advance Steel FAQs, click here.