입금하신 분들은 가급적 아래 양식에 맞게 쪽지나 문자 주세요.
이름/ 연락처/ 주소 / 수량/(선불.착불 유무) 입금금액 / 환불계좌
입금계좌 1.: 카카오뱅크 3333-01-5252661 (예금주: 최웅범)
* C-ARM 은 이동, 설치 , 등록 비용 따로 추가됩니다.
** 쉽게 택배나 용달로 오고가는 물건이 아닙니다.
미리 여기 오셔서 충분히 살펴보시고, 배송관련 상담하시고 구매 하시길바랍니다.
***그외 자세한 문의나 자료는=== 문의전화 : 010-6677-4062 카톡아이디 : untbum
Radieq Surgical Mobile C-Arm 9" X-Ray System = 590만원 (현금가격)
- 중고/리퍼제품 (분해, 점검 테스트 완료됨)
- 9" Mobile C-Arm 9" X-Ray System
- X-ray용 gray scale 17" CRT 모니터 + TFT LCD 19" 모니터 장착(영상비교)
-간단한 사용법과 적은 공간을 차지합니다.
* SURGIEYE RC-900 은 수출용 디지털 엑스레이 장비로, 병원내 수술실, 응급실, 석고실과 기타 임상 진단용으로 사용됩니다
** C-arm 테이블은 따로 제작 가능함
<제품 특성>
- 쉬운 사용, 운반, 보관 등이 편리
- 방식의 고전압 발생 장치 채택, 출력이 안정적
-저선량 / 저감 오일
- 0.5mm/1.5mm의 선관 초접을 채택, 수술 및 영상추출에 유용
- 고해상도 CCD camera채택, 최상의 영상을 제공
- Collimator를 장착, 불필요한 선 차단
- 온도 센서를 부착, tube 과열을 방지
- ABC/Pulse/Film mode로 사용 편리
- 영상 확대, 회전 기능, 3단 줌 기능
- Boost 기능
1. Features -Inverter type high voltage generator -Large C-arm SID1000mm -Long term stability of X-ray tube and HFG unit -High power ourput with 2.2KW -Easy operation both side control panel -Inteligent ABC(Automatic Brightness Control) system - Very easy installation, positioning and smooth movement -All the unit wheels with cable protection device -Last image hold -Soft control and efficient braking system -Easy operation by digital display control 2. Specification 1) X-ray tube -Type: Stationary anode -Focal spot: 0.5/1.5mm -Heat capacity: 45KHU -Target angle: 16 degree -Max. tube voltage: 110kV 2) Generator -Type: High Frequency Inverter -Max. output: 2.2KW -kV range: 40-110KV (1KV step) -mA range: 0.5-4mA, 5-10mA(Boost mode)/20mA only(RAD mode) -mAs range: 0.4-100mAs -ABC: Auto Brightness Control -Pulses/sec: 2pulse 3) Image Intensifier -Type: High definition -Field size: 10" tripple field(9") or +9" (option) -Resolution(Lp/cm): 48 (56,66), 54(6") 4) TV Camera -Type: CCD -Memory: 16Frame -Monitor: 17" (or 15", 12" option) -Scan Line: 525 lines (NTSC) -Last image hold, Image rotation 5) C-Arm -Free size: 785mm(9"), 770mm(6") -Depth: 670mm(9"), 640mm(6") -Horizontal movement: 200mm -Vertical movement: 200mm -Orbital rotation: 120degree -Panning motion: +/-12.5degree -Pivot rotation: +/-180degree 6) Power requirement: 220Vac, 50/60Hz, 3.5kVA