|
Coating standards specifically available for the oil & gas industry
Abbreviations
ABS American Bureau of Shipping
ABNT Associação Brasileira de Normas Técnicas AFNOR Association Française de Normalisation ASME American Society of Mechanical Engineers ANSI American National Standards Institute
API American Petroleum Institute AWWA American Water Works Association BS British Standards
CEN European Committee for Standardization CSA Canadian Standards Association
DNV Det Norske Veritas (Norway)
DIN German Institute for Standardization
EEMUA Engineering Equipment & Materials Users' Association EFC European Federation of Corrosion
EN European Norm
GCC Cooperation Council for the Arab States of the Gulf
GSO Gulf Standardization Organization for the Cooperation Council for the Gulf Arab States IEC International Electrotechnical Commission
IMO International Maritime Organization EEMUA Instrumentation and Control Committee IS Indian Standard
ISO International Organization for Standardization NACE National Association of Corrosion Engineers (US) NF National French Standard
NORSOK Norwegian Competitive Position on the Continental Shelf NPD Norwegian Petroleum Directorate
NS Norwegian Standard
OCIMF Oil Companies International Marine Forum OCMA Oil Companies Materials Association
OGP International Association of Oil & Gas Producers OLF Norwegian Oil Industry Association
PAS Publicly Available Specification (ISO) PIP Process Industry Practices (US)
PSA Petroleum Safety Authority (Norway)
RAL German Reichsausschuß für Lieferbedingungen und Gütesicherung SDO Standards Developing Organization
SFS Finnish Standards Association SSPC Society for Protective Coatings (US) STG Specific Technology Groups
TBL Federation of Norwegian Manufacturing Industries TEG Technology Exchange Groups
TC Technical Committee
TF Task Force
TG Task Group
UKOOA UK Offshore Operator Association (Now UK Oil & Gas) VDI Association of German Engineers
WG Working Group
Available coating standards
The primary and specific coating standards for the oil & gas industry are singled out in paragraph 1.0 below, as these standards are the responsibility of the coating experts of the oil & gas industry community to develop and maintain, and nobody else.
Many of the references in paragraph 2.0 below are generally applicable coating and paint related standards not specifically made for the oil & gas industry, but they are frequently used by the coating discipline and hence listed to check if they are commonly referenced by the global oil & gas industry for their individual and specific purposes.
1.0 Coating standards specifically available for the oil & gas industry
API Bull 91 Planning and Conducting Surface Preparation and Coating Operations for Oil and Natural Gas Drilling and Production Facilities in a Marine EnvironmentAPI RP 5L2 RP for Internal Coating of Line Pipe for Non-Corrosive Gas Transmission ServiceAPI RP 5L7 RP for Un-primed Internal Fusion Bonded Epoxy Coating of Line PipeAPI RP 5L9 External Fusion Bounded Epoxy Coating of Line PipeAPI RP 652 Linings of Aboveground Petroleum Storage Tank BottomsAPI 1160 Managing system integrity for hazardous liquid pipelinesAPI 2217A Guidelines for Work in Inert Confined Spaces in the Petroleum IndustryASTM 06.02 Paint-Products and Applications; Protective Coatings; Pipeline CoatingsASTM G 8 Test method for cathodic disbanding of pipeline coatingsASTM G14 Standard Test Method for Impact Resistance of Pipeline Coatings (Fall- ing Weight Test).ASTM G17 Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod).DNV RP-F102 Pipeline field joint coating and field repair of line pipe coatingDNV RP–F106 Factory applied external pipeline coatings for corrosion control.EN 10288 Steel Tubes and Fittings for Onshore and Offshore Pipelines - External Two Layer Extruded Polyethlene Based CoatingsEN 10289 Steel Tubes and Fittings for Onshore and Offshore Pipelines - External Liquid Applied Epoxy and Epoxy-Modified CoatingsEN 10290 Steel Tubes and Fittings for Onshore and Offshore Pipelines External Liquid Applied Polyurethane and Polyurethane-Modified CoatingsEN 10300 Steel tubes and fittings for onshore and offshore Pipelines - Bituminous hot applied materials for external coatingEN 10301 Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gasEN 10310 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatingsEN 10329 Steel tubes and fittings for onshore and offshore pipelines - External field joint coatingsEEMUA 194 Guidelines for Materials Selection and Corrosion Control for Subsea Oil and Gas Production EquipmentISO 15741 Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gasesISO 20340 Paints and varnishes – Performance requirements for protective paint systems for offshore and related structuresISO 21809 Petroleum and natural gas industries – External coatings for buried or submerged pipelines used in pipeline transportation systems:
Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (In preparation)
Part 2: Fusion-bonded epoxy coatings (issued 2007)
Part 3: Field joint coatings (issued 2008)
Part 4: Polyethylene coatings (2-Layer PE) (In preparation) Part 5: External concrete coatings (In preparation)
NACE 30105 Electrical Isolation/Continuity and Coating Issues for Offshore Pipeline Cathodic Protection SystemsNACE RP0105 Standard Recommended Practice Liquid-Epoxy Coatings for External Repair, Rehabilitation, and Weld Joints on Buried Steel PipelinesNACE RP-0176 Corrosion Control of Steel, Fixed Offshore Platforms Associated with Petroleum ProductionNACE RP0178 Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to be Lined for Immersion Sur- face.NACE RP0188 Discontinuity (Holiday) Testing of Protective CoatingsNACE RP0191 Application of Internal Plastic Coatings for Oilfield Tubular Goods and AccessoriesNACE RP0193 External Cathodic Protection of On-Grade Carbon Steel Storage Tank BottomsNACE RP0198 Control of Corrosion Under Thermal Insulation and Fireproofing Materials - A Systems ApproachNACE RP0274 High-Voltage Electrical Inspection of Pipeline CoatingsNACE RP0303 Standard Recommended Practice Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application, Performance, and Quality ControlNACE RP0304 Design, Installation, and Operation of Thermoplastic Liners for Oilfield PipelinesNACE RP0375 Field-Applied Underground Wax Coating Systems for Underground Pipelines: Application, Performance, and Quality ControlNACE RP0394 Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe CoatingNACE RP0399 Plant Applied, External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality ControlNACE RP0402 Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints: Application, Performance, and Quality ControlNACE RP0602 Field-Applied Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality ControlNACE RP0892 Coatings and Linings over Concrete for Chemical Immersion and Containment ServiceNACE SP0108 Corrosion Control of Offshore Structures by Protective CoatingsNACE SP0169 Control of External Corrosion on Underground or Submerged Metallic Piping SystemsNACE SP0181 Liquid-Applied Internal Protective Coatings for Oilfield Production EquipmentNACE SP0185 Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged PipeNACE SP0490 Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 um (10 to 30 Mils)NACE TM0102 Measurement of Protective Coating Electrical Conductance on Under- ground PipelinesNACE TM0104 Offshore Platform Ballast Water Tank Coating System EvaluationNACE TM0105 Test Procedures for Organic-Based Conductive Coating Anodes for Use on Concrete StructuresNACE TM0174 Laboratory Methods for the Evaluation of Protective Coatings and Linings Materials on Metallic Substrates in Immersion ServiceNACE TM0185 Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave TestingNACE TM0186 Holiday Detection of Internal Tubular Coatings of 250 to 760μm (10 to 30 Mils) Dry Film ThicknessNACE TM0204 Exterior Protective Coatings for Seawater Immersion ServiceNACE TM0299 Corrosion Control and Monitoring in Seawater Injection SystemsNACE TM0304 Offshore Platform Atmospheric and Splash Zone Maintenance Coating System EvaluationNACE TM0384 Holiday Detection of Internal Tubular Coatings of Less Than 250 Micrometers (10 mils) Dry-Film ThicknessNACE TM0404 Offshore Platform Atmospheric and Splash Zone New Construction Coating System EvaluationNORSOK M-501 Surface preparation and protective coating
2.0 Generally applicable coating or related standards
ABS 49 The Inspection, Maintenance and Application of Marine Coating Systems
ABS 153 Guide for the Class Notation Coating performance standardAFNOR NF M87-803 Oil industry - Ballast coating for pipes - Implementation.AFNOR NF M88-516 Steel tanks with outside concrete coating for underground storage of mineral oils.ANSI A13.1 Scheme for identification of piping systemsANSI Z535.1 Safety Color CodeAPI/EI Std 1541 Performance requirements for protective coating systems used in avia- tion fuel storage tanks & pipingASTM A 123/A123M Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel ProductsASTM A 143 Safeguarding Against Embrittlement of Hot-Dip, Galvanized Structural Steel ProductsASTM A 153/A153M Zinc Coating (Hot-Dip) on Iron and Steel HardwareASTM A 385 Standard Specification for Zinc Dust PigmentASTM A 392 Specification for zinc-coated steel chain-link fence fabric.ASTM A 780 Specification for repair of damaged hot-dip galvanized coatings. ASTM A 972/A972M Standard Specification for Fusion Bonded Epoxy Coated Pipe Piles ASTM B 117 Standard Practice for Operating Salt Spray (fog) ApparatusASTM C633 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings (NOTE - often preferred by thermal sprayers to ASTM D4541).ASTM D16 Standard Terminology for Paint, Related Coatings, Materials, and ApplicationsASTM D 521 Test methods for chemical analysis of zinc dust (metallic zinc powder)ASTM D 570 Standard test method for water absorption of plasticsASTM D 610 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces.ASTM D 638 Standard Test Method for Tensile Properties of PlasticsASTM D 823 Method of producing films of uniform thickness of paint, varnish, lac- quer and related products on test panelsASTM D 1000 Method of testing pressure sensitive adhesive coated tapes used for electrical insulationASTM D 1141 Specification for substitute ocean waterASTM D 1186 Standard Test Methods for Non-Destructive Measurement of Dry Film Thickness of Non-Magnetic Coatings Applied to a Ferrous Base.ASTM D 1200 Test method for viscosity of paints, varnishes and lacquers by Ford viscosity cupASTM D 1212 Standard Test Methods for Measurement of Wet Film Thickness of Organic CoatingsASTM D 3276 Standard Guide for Painting Inspectors (Metal Substrates)ASTM D 1640 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room TemperatureASTM D 2092 Practices for preparation of zinc-coated galvanized steel structures for paintASTM D 2240 Standard Test Method for Rubber Property—Durometer HardnessASTM D 2369 Test method for volatile content of coatingsASTM D 2371 Test method for pigment content of solvent-reducible paintsASTM D 3359 Method for measuring adhesion by tape testASTM D 3418 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calor- imetryASTM D3451 Standard Guide for Testing Coating Powders and Powder CoatingsASTM D 4060 Standard test method for abrasion resistance of organic coatings by the Taber abraserASTM D4228 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces.ASTM D 4285 Test method for indicating oil or water in compressor airASTM D 4414 Standard Practice for Measurement of Wet Film Thickness by Notch GagesASTM D 4417 Method C Test method for Field Measurement of Surface ProfileASTM D 4541 Test method for pull-off strength of coatings using portable adhesion testers.ASTM D 4752 Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub.ASTM D 4940 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting AbrasivesASTM D5144 Standard Guide for Use of Protective Coating Standards in Nuclear Power PlantsASTM D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle MeasurementsASTM E 337 Standard Test Method for Measuring Humidity with a Psychrometer (Wet and Dry Bulb Temperatures)ASTM F 21 Standard Test Method for Hydrophobic Surface Films by Atomiser TestASTM G 53 Recommended practice for operating light – and water – exposure apparatus (fluorescent UV-condensation type) for exposure of nonmetallic materialsASTM G65 Standard Test Method for Measuring Abrasion Using the Dry Sand/ Rubber Wheel ApparatusASTM G99 Standard Test Method for Wear Testing with a Pin-on-Disk ApparatusAWWA C-203 Coal tar protective coatings and linings for steel water pipelines- enamel and tape-hot appliedAWWA C213 Standard for Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water LinesBS 381C Colour for Identification, Coding and Special PurposesBS 1710 Identification of Pipelines and ServicesBS 2451 Chilled Iron, Shot and GritBS 2482 Whirling HygrometersBS 3900 Methods for Testing CoatingsBS 4164 Specification for coal tar based, hot applied coating materials for protecting iron and steel including suitable primers.BS 4800 Specification for Paint Colours for Building PurposesBS 5378 Safety Signs and Colours: Colour and Design.BS 5493 Code of Practice for Protective Coating of Iron and Steel against CorrosionBS 5973 Code of Practice for Access and Working Scaffolds and Special Scaffold Structures in SteelBS 6374 Lining of Equipment with Polymeric Materials for the Process IndustriesCSA–Z245.20-06 External Fusion Bond Epoxy Coating for Steel PipeCSA Z245.21-06 External polyethylene coating for pipeDIN 32521 Acceptance test and quality control for thermal spraying equipment.DNV CN 33.1 Corrosion prevention of tanks and holdsDNV OS–F101 Submarine pipeline systemsEFC 20 Organic and Inorganic Coatings for Corrosion Prevention - Research and ExperienceEFC 54 Innovative pre-treatment techniques to prevent corrosion of metallic surfacesEN Standards CEN has adopted most of the ISO standards issued by ISO/TC35 Paints and varnishes, but for simplicity they are not shown here.EN 582 Thermal spraying. Determination of tensile adhesive strengthEN 1403 Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirementsEN 10142 Specification for continuously hot-dip zinc coated low carbon steel sheet and strip for cold forming: technical delivery conditionsEN 10147 Continuously hot-dip zinc coated structural steels strip and sheet. Technical delivery conditionsEN 10240 Internal and/or External Protective Coatings for Steel Tubes - Specification for Hot Dip Galvanized Coatings Applied in Automatic PlantsEN 12540 Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromiumEN 13143 Metallic and other inorganic coatings - Definitions and conventions concerning porosityEN 13144 Metallic and other inorganic coatings – Method for quantitative measurement of adhesion by tensile testEN 22063 Metallic and Other Inorganic Coatings – Thermal SprayingIMO MSC.215(82) Performance standard for protective coatings for dedicated seawater ballast tanks in all types of ships and double-side skin spaces of bulk carriersIMO MSC.244(83) Performance standard for protective coatings for void spaces on bulk carriers and oil tankersIMO A.798(19) Guidelines for the selection, application and maintenance of corrosion prevention systems of dedicated seawater ballast tanksIMO MSC.1/Circ.1279 Guidelines for corrosion protection of permanent means of access arrangementsIMO MSC.1/Circ.1330 Guidelines for maintenance and repair of protective coatingsIS-5 Colour codingIS-101 Methods for test for ready mixed paints and enamelsIS-2379 Indian Standard for Pipe line identification-colour codeISO 62 Plastics – Determination of water absorptionISO 179-2 Plastics – Determination of Charpy impact properties – Part 2: Instrumented impact testISO 306 Plasctics – Thermoplastic materials – Determination of Vicat softening temperatureISO 527-1 Plastics – Determination of tensile properties – Part 1: General principlesISO 527-2 Plastics – Determination of tensile properties – Part 2: Test conditions for moulding and extrusion plasticsISO 787-10 General methods of test for pigments and extenders - Part 10: Determination of density. Pyknometer methodISO 868 Plastics and ebonite – Determination of indentation hardness by means of a Durometer (Shore hardness)ISO 1133 Plastics – Determination of the melt-mass flow rate (MFR) and melt- volume flow rate (MVR) of thermoplasticsISO 1183 Plastics-Test method for determinig the density and relative density of non-cellular plasticsISO 1461 Metallic coatings - Hot-dip galvanised coating on fabricated ferrous productsISO 1512 Paints and varnishes – Sampling of products in liquid or paste formsISO 1513 Paints and varnishes – Examination and preparation of samples for test- ingISO 1514 Paints and varnishes – Standard panels for testingISO 1516 Paints and varnishes – Closed cup equilibrium methodISO 1517 Paints and varnishes – Surface-drying test – Ballotini methodISO 1519 Paints and varnishes – Bend test (cylindrical mandrel)ISO 1524 Paints and varnishes – Determination of fineness of grindISO 2063 Thermal Spraying - Metallic and Other Inorganic Coatings - Zinc, Aluminium and Their AlloysISO 2080 Metallic and other inorganic coatings – Surface treatment, metallic and other inorganic coatings – VocabularyISO 2409 Paints and varnishes – Cross-cut testISO 2431 Paints and varnishes – Determination of flow time by use of flow cupsISO 2555 Plastics – Resins in the liquid state or as emulsions or dispersions – Determination of apparent viscosity by the Brookfield Test methodISO 2808 Paints and varnishes - Determination of film thicknessISO 2811 Paints and varnishes – Determination of densityISO 2812 Paints and varnishes - Determination of resistance to liquidsISO 2813 Paints and varnishes – Determination of specular gloss of non-metallic paint films at 20 degrees, 60 and 85 degrees.ISO 2814 Paints and varnishes - Comparison of contrast ratio (hiding power) of paint of the same type and colourISO 2815 Paint and Varnishes – Buchholz Indentation Test MethodISO 2632 Roughness Comparison Specimens, Cast SurfacesISO 2808 Paints and varnishes – Determination of film thicknessISO 2814 Paints and varnishes - Comparison of contrast ratio (hiding power) of paint of the same type and colourISO 3001 Plastics – Epoxy compounds – Determination of epoxy equivalentISO 3231 Paints and varnishes – Determination of resistance to humid atmospheres containing sulphur dioxideISO 3233 Coating and varnishes determination of volume of dry coating obtained from a given volume of liquid coatingISO 3251 Paints and varnishes –Determination of non-volatile matter of paints, varnishes and binders for paints and varnishesISO 3549 Zinc dust pigments for paints – Specifications and test methodsISO 3678 Paints and varnishes - Print-free testISO 3892 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methodsISO 4287 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parametersISO 4541 Metallic and other non-organic coatings - Corrodkote corrosion testISO 4543 Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditionsISO 4623 Paints and varnishes – Determination of resistance to filiform corrosionISO 4624 Paints and varnishes - Pull-off test for adhesionISO 4628 Paints and varnishes - Evaluation of degradation of paint coatings Designation of intensity, quantity and size of common types of defectISO 4892-2 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lampsISO 4998 Continuous hot-dip zinc-coated carbon steel sheet of structural qualityISO 6270 Paints and varnishes – Determination of resistance to humidityISO 6860 Paints and varnishes – Bend test (conical mandrel)ISO 6964 Polyolefine pipes and fittings: Determination of carbon black content by calcinations and pyrolysis: Test method and basic principlesISO 7253 Paints and Varnishes – Determination of Resistance to Neutral Salt Spray.ISO 7724 Paints and varnishes. Determination of colour and colour differenceISO 8130-6 Coating powders – Part 6- Determination of gel time of thermosetting coating powders at a given temperatureISO 8401 Metallic coatings - Review of methods of measurement of ductilityISO 8403 Metallic coatings - Coatings anodic to the substrate - Rating of test specimens subjected to corrosion testsISO 8302 Thermal insulation-Determination of steady state thermal resistance and related properties-Guarded hot plate apparatusISO 8501 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness –
Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
Part 3: Preparation grades of welds, edges and other areas with surface imperfections
Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
ISO 8502 Preparation of steel substrates before application of paints and related products – Test for the assessment of surface cleanliness
Part 2: Laboratory determination of chloride on cleaned surfaces
Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
Part 4: Guidance on the estimation of the probability of condensation prior to paint application
Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
Part 6: Extraction of soluble contaminants for analysis - The Bresle method
Part 8: Field method for the refractometric dedetermination of moisture Part
9: Field method for the conductometric determination of water- soluble salts
Part 11: Field method for the turbidimetric determination of water-soluble sulfate
Part 12: Field method for the titrimetric determination of water-soluble ferrous ions
ISO 8503 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast cleaned substrates.
Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
Part 2: Method for the grading of surface profile of abrasive blast- cleaned steel - Comparator procedure
Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure
Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure
Part 5: Replica tape method for the determination of the surface profile
ISO 8504 Preparation of steel substrates before application of paints and related products - Surface preparation methods
Part 1: General principles
Part 2: Abrasive blast cleaning.
Part 3: Hand- and power-tool cleaning
ISO 9220 Metallic coatings - Measurement of coating thickness - Scanning electron microscope methodISO 9223 Corrosion of metals and alloys. Atmospheres’ corrosivity. ClassificationISO 9227 Corrosion tests in artificial atmospheres – Salt spray testsISO 10308 Metallic coatings – review of porosity testISO 11124 Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives – 4 partsISO 11125 Paints and varnishes – Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives – 7 partsISO 11126 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – 8 partsISO 11127 Paints and varnishes – Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast- cleaning abrasives – 7 partsISO 11295 Guidance on the classification and design of plastics piping systems used for renovationISO 11357-1 Plastics – Differential scanning calorimetry (DSC) – Part 1: General principles ISO 11357-3 Plastics – Differential scanning calorimetry (DSC) – Part 3: Determination of temperature and enthalpy of melting and crystallization ISO 12944 Paints and Varnishes – Corrosion protection of steel structures by protective paint systems
Part 1: General introduction
Part 2: Classification of environments
Part 3: Design considerations.
Part 4: Types of surface and surface preparation
Part 5: Protective paint systems
Part 6: Laboratory performance test methods
Part 7: Execution and supervision of paint work
Part 8: Development of specifications for new work and maintenance
ISO 14713 Protection Against Corrosion of Iron and Steel in Structures – Zinc and Aluminium Coatings - GuidelinesISO 14918 Thermal Spraying - Approval Testing of Thermal SprayersISO 16348 Metallic and other inorganic coatings - Definitions and conventions concerning appearanceISO 19840 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Measurement of, and acceptance criteria for, the thickness of dry film on rough surfacesISO 28199 Paints and varnishes - Evaluation of properties of coating systems related to the application process – 3 partsNACE 6A100 Coatings Used in Conjunction with Cathodic ProtectionNACE 6A192 Dehumudification and Temperature Control During Surface Preparation, Application, and Curing for Coatings/Linings of Steel Tanks, Vessels, and Other Enclosed AreasNACE 6A287 Electroless Nickel CoatingsNACE 6H188 Coatings over Nonabrasive-Cleaned Steel SurfacesNACE 10D199 Coatings for the Repair and Rehabilitation of the External Coatings of Buried Steel PipelinesNACE 2103 Liquid-Applied Coatings for High-Temperature Atmospheric ServiceNACE 37507 Corrosion Prevention by Protective CoatingsNACE 80200 Preparation of Protective Coating Specifications for Atmospheric ServiceNACE NO. 4 Brush-Off Blast CleaningNACE NO. 5 Surface Preparation and Cleaning of Metals by Waterjetting Prior to RecoatingNACE NO. 8 Industrial Blast CleaningNACE NO. 11 Thin-Film Organic Linings Applied in New Carbon Steel Process VesselsNACE RP0169 Standard Recommended Practice for Control of External Corrosion on Underground or Submerged Metallic Piping SystemsNACE RP0188 Discontinuity (holiday) testing of protective coatingsNACE RP 0274 High voltage electrical inspection of pipeline coatings prior to installationNACE RP0287 Field Measurements of Surface Profile of Abrasive Blast Cleaned Steel Surface Using Replica Tape.NACE RP0394 Standard Recommended Practice for Application, Performance and Quality Control of Plant Applied, Fusion-Bonded Epoxy External Pipe Coating.NACE RP0490 Standard Recommended Practice for Holiday Detection of Fusion- Bonded Epoxy External Coating of 250 to 760 Microns (10 to 30 mils)NACE RP0495 Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail IndustriesNACE SP0188 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive SubstratesNACE TM0109 Aboveground Survey Techniques for the Evaluation of Underground Pipeline Coating ConditionNACE TM0174 Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials on Metallic Substrates in Immersion ServiceNACE TM0183 Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing EnvironmentNF A 49 710 External three layer polyethylene based coatingNF A 49 711 External triple layer polypropylene based coating – Appendix K: Test for evaluating delamination resistance under negative polarizationNF T 34 550 Paints and varnishes- Corrosion protection of steel structures by protective paints systems – SpecificationsNORSOK M-001 Material selectionNORSOK S-002 Working environmentNS 476 Paints and coatings - Approval and certification of surface treatment inspectorsOCIMF International Safety Guide for Oil Tankers and TerminalsPIP CTCE1000 External Coating System Selection CriteriaPIP CTSC1000 Application of Coatings to ConcretePIP CTSE1000 Application of External CoatingsPIP CTSL1000 Application of Internal LiningsPIP CTSU1000 Application of Underground Coatings PIP CTEG1000 Guidelines for Use of Coatings Practices PIP CTGG1000 Coatings Document Use GuidelineRAL 840 HR Deutschen Normen AuschussSIS 055900 Pictorial Surface Preparation Standards for Coating Steel SurfacesSFS 8145 Anticorrosive painting, surface preparation methods of blast cleaned and shop primer coated steel substrates and preparation grades for respective treatments.SSPC Volume 1 Good Painting PracticeSSPC Volume 2 Systems and SpecificationsSSPC-SP COM, Surface Preparation Commentary for Steel and Concrete SubstratesSSPC-SP 1, Solvent CleaningSSPC-SP 2, Hand Tool CleaningSSPC-SP 3, Power Tool CleaningSSPC-SP 5/NACE No. 1 White Metal Blast Cleaning SSPC-SP 6/NACE No. 3 Commercial Blast Cleaning SSPC-SP 7/NACE No. 4 Brush-Off Blast Cleaning SSPC-SP 8 PicklingSSPC-SP 10/NACE No. 2 Near-White Blast CleaningSSPC-SP 11 Power Tool Cleaning to Bare MetalSSPC-SP 12/NACE No. 5 Surface Preparation and Cleaning of Metals by Waterjetting Prior to RecoatingSSPC-SP 13/NACE No. 6 Surface Preparation of ConcreteSSPC-SP 14/NACE No. 8 Industrial Blast CleaningSSPC-SP 15 Commercial Grade Power Tool CleaningSSPC-TR 1/NACE 6G194 Thermal Pre-CleaningSSPC-TR 2/NACE 6G198 Wet Abrasive Blast CleaningSSPC-TR 3/NACE 6A192 Dehumidification and Temperature Control During Surface Preparation, Application, and Curing for Coatings/Linings of Steel Tanks, Vessels, and Other Enclosed SpacesSSPC-TR 4/NACE 80200 Preparation of Protective Coating Specifications for Atmospheric ServiceSSPC-TR 5/ICRI 03741/NACE 02203
Design, Installation, and Maintenance of Protective Polymer Flooring Systems for Concrete
SSPC-AB 1 Mineral and Slag AbrasivesSSPC-AB 2 Cleanliness of Recycled Ferrous Metallic AbrasivesSSPC-AB 3 Ferrous Metallic AbrasiveSSPC-PS 1.00 Guide for Selecting Oil Base Painting SystemsSSPC-PS 1.09 Three-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment)SSPC-PS 1.10 Four-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment)SSPC-PS 1.13 One-Coat Oil Base Slow Drying Maintenance Painting System (Without Lead or Chromate Pigments)SSPC-PS Guide 2.00 Guide for Selecting Alkyd Painting Systems SSPC-PS Guide 4.00 Guide for Selecting Vinyl Painting Systems SSPC-PS 4.02 Four-Coat Vinyl Painting SystemSSPC-PS 4.04 Four-Coat White or Colored Vinyl Painting System (For Fresh Water, Chemical, and Corrosive Atmospheres)SSPC-PS Guide 7.00 Guide for Selecting One-Coat Shop Painting SystemsSSPC-PS Guide 8.00 Guide to Topcoating Zinc-Rich PrimersSSPC-PS 9.01 Cold-Applied Asphalt Mastic Painting System with Extra Thick FilmSSPC-PS 10.01 Hot-Applied Coal Tar Enamel Painting SystemSSPC-PS 10.02 Cold-Applied Coal Tar Mastic Painting SystemSSPC-PS 11.01 Black (or Dark Red) Coal Tar Epoxy-Polyamide Painting SystemSSPC-PS Guide 12.00 Guide to Zinc-Rich Coating Systems SSPC-PS 12.01 One Coat Zinc-Rich Painting System SSPC-PS 13.01 Epoxy Polyamide Painting System SSPC-PS 14.01 Steel Joist Shop Painting SystemSSPC-PS Guide 15.00 Guide for Selecting Chlorinated Rubber Painting SystemsSSPC-PS 15.01 Chlorinated Rubber Painting System for Salt Water ImmersionSSPC-PS 15.02 Chlorinated Rubber Painting System for Fresh Water ImmersionSSPC-PS 15.03 Chlorinated Rubber Painting System for Marine and Industrial AtmospheresSSPC-PS 15.04 Chlorinated Rubber Painting System for Field Application Over a Shop- Base Inorganic Zinc-Rich PrimerSSPC-PS 16.01 Silicone Alkyd Painting System for New Steel SSPC-PS Guide 17.00 Guide for Selecting Urethane Painting Systems SSPC-PS 18.01 Three-Coat Latex Painting SystemSSPC-PS Guide 19.00 Guide for Selecting Painting Systems for Ship Bottoms SSPC-PS Guide 20.00 Guide for Selecting Painting Systems for Boottoppings SSPC-PS Guide 21.00 Guide for Selecting Painting Systems for TopsidesSSPC-PS Guide 22.00 Guide for Selecting One-Coat Preconstruction or Prefabrication Paint- ing SystemsSSPC-CS 23.00/AWS C2.23M/NACE No. 12
Specification for the Application of Thermal Spray Coatings (Metalliz- ing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel
SSPC-PS 24.00 Latex Painting System for Industrial and Marine Atmospheres, Performance-BasedSSPC-PS 26.00 Aluminum Pigmented Epoxy Coating System Materials Specification, Performance-BasedSSPC-PS 27.00 Alkyd Coating System Materials Specification, Performance-BasedSSPC-Paint COM Commentary on Paint SpecificationsSSPC-Paint 8 Aluminum Vinyl PaintSSPC-Paint 9 White (or Colored) Vinyl PaintSSPC-Paint 15 Steel Joist Shop Primer/Metal Building PrimerSSPC-Paint 16 Coal Tar Epoxy-Polyamide Black (or Dark Red) PaintSSPC-Paint 17 Chlorinated Rubber Inhibitive PrimerSSPC-Paint 18 Chlorinated Rubber Intermediate Coat PaintSSPC-Paint 19 Chlorinated Rubber Topcoat PaintSSPC-Paint 20 Zinc-Rich Coating, Type I - Inorganic and Type II - OrganicSSPC-Paint 21 White or Colored Silicone Alkyd PaintSSPC-Paint 22 Epoxy Polyamide Paints (Primer, Intermediate, and Topcoat)SSPC-Paint 23 Latex Primer for Steel SurfacesSSPC-Paint 24 Latex Semigloss Exterior TopcoatSSPC-Paint 25 Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Hand Cleaned SteelSSPC-Paint 25 BCS, Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Blast Cleaned SteelSSPC-Paint 26 Slow-Drying Linseed Oil Black Maintenance Primer (Without Lead or Chromate Pigment)SSPC-Paint 27 Basic Zinc Chromate-Vinyl Butyral Wash Primer SSPC-Paint 28 Water-Borne Epoxy Primer for Steel Surfaces SSPC-Paint 29 Zinc Dust Sacrificial Primer, Performance-Based SSPC-Paint 30 Weld-Through Inorganic Zinc PrimerSSPC-Paint 31 Single-Package Water-Borne Alkyd Primer for Steel Surfaces, Perform- ance-BasedSSPC-Paint 32 Coal Tar Emulsion CoatingSSPC-Paint 33 Coal Tar Mastic, Cold AppliedSSPC-Paint 34 Water-Borne Epoxy Topcoat for Steel SurfacesSSPC-Paint 35 Medium Oil Alkyd Primer (Air Dry/Low Bake)SSPC-Paint 36 Two-Component Weatherable Aliphatic Polyurethane Topcoat, Performance-BasedSSPC-Paint 37 Waterborne Epoxy Coating for Cementitious Substrates, Performance- BasedSSPC-Paint 38 Single-Component Moisture-Cure Weatherable Aliphatic Polyurethane Topcoat, Performance-BasedSSPC-Paint 39 Two-Component Aliphatic Polyurea Topcoat, Fast or Moderate Drying, Performance-BasedSSPC-Paint 101 Aluminum Alkyd PaintSSPC-Paint 102 Black Alkyd PaintSSPC-Paint 104 White or Tinted Alkyd PaintSSPC-Paint 106 Black Vinyl PaintSSPC-Paint 108 High-Build Thixotropic Leafing Aluminum PaintSSPC-PA COM Commentary on Paint Application Monitoring and Controlling Ambient Conditions During Coating OperationsSSPC-PA 1 Shop, Field, and Maintenance Painting of SteelSSPC-PA 2 Measurement of Dry Coating Thickness with Magnetic GagesSSPC-PA 3 A Guide to Safety in Paint ApplicationSSPC-PA Guide 4 Guide to Maintenance Repainting with Oil Base or Alkyd Painting SystemsSSPC-PA Guide 5 Guide to Maintenance Coating of Steel Structures in Atmospheric SurfaceSSPC-PA 6/NACE No. 10 Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage TanksSSPC-PA 7 Applying Thin Film Coatings to ConcreteSSPC-PA 8/NACE No. 11 Thin-Film Organic Linings Applied in New Carbon Steel Process VesselsSSPC-QP COM Commentary on Qualification ProceduresSSPC-QP 1 Standard Procedure for Evaluating Painting Contractors (Field Applica- tion to Complex Industrial Structures)SSPC-QP 2 Standard Procedure for the Qualification of Painting Contractors (Field Removal of Hazardous Coatings from Complex Structures)SSPC-QP 3 Standard Procedure for Evaluating Qualifications of Shop Painting ApplicatorsSSPC-QP 4 Standard Procedure for Evaluating the Qualifications of Contractors Disturbing Hazardous Coatings During Demolition and Repair WorkSSPC-QP 5 Standard Procedure for Evaluating the Qualifications of Coating and Lining Inspection CompaniesSSPC-QP 6 Standard Procedure for Evaluating the Qualifications of Contractors Who Apply Thermal Spray (Metallizing) for Corrosion Protection of Steel and Concrete StructuresSSPC-QP 7 Procedure for Evaluating Painting Contractors with Limited Industrial Work ExperienceSSPC-QP 8 Standard Procedure for Evaluating the Qualifications of Contracting Firms That Install Polymer Coatings and Surfacings on Concrete and Other Cementitious SubstratesSSPC-QS 1 Standard Procedure for Evaluating a Contractor's Advanced Quality Management SystemSSPC-Guide 6 Guide for Containing Debris Generated During Paint Removal OperationsSSPC-Guide 7 Guide for the Disposal of Lead-Contaminated Surface Preparation DebrisSSPC-Guide 9 Guide for Atmospheric Testing of Coatings in the FieldSSPC-Guide 10 Guide to Specifying Coatings Conforming to Volatile Organic Com- pound (VOC) Content RequirementsSSPC-Guide 12 Guide for Illumination of Industrial Painting ProjectsSSPC-Guide 13 Guide for the Identification and Use of Industrial Coating Materials in Computerized Product DatabasesSSPC-Guide 14 Guide for the Repair of Imperfections in Galvanized, Organic, or Inor- ganic Zinc-Coated Steel Using Organic Zinc-Rich CoatingsSSPC-Guide 15 Field Methods for Retrieval and Analysis of Soluble Salts on Steel and Other Nonporous SubstratesSSPC-Guide 16 Guide to Specifying and Selecting Dust CollectorsSSPC-Guide 17 Guide to Developing a Corporate Safety Program for Industrial Painting and Coating ContractorsSSPC-TU 1 Surface-Tolerant Coatings for SteelSSPC-TU 2 Design, Installation, and Maintenance of Coating Systems for Concrete Used in Secondary Containment (NACE 6G197)SSPC-TU 3 OvercoatingSSPC-TU 5 Accelerated Testing of Industrial Protective CoatingsSSPC-TU 6 Chemical Stripping of Organic Coatings from Steel StructuresSSPC-TU 7 Conducting Ambient Air, Soil, and Water Sampling During Surface Preparation and Paint Disturbance ActivitiesSSPC-TU 8 The Use of Isocyanate-Containing Paints as Industrial Maintenance CoatingsSSPC-TU 9 Estimating Costs for Protective Coatings ProjectsSSPC-TU 10 Procedures for Applying Thick Film Coatings and Surfacings Over Concrete FloorsSSPC-TU 11 Inspection of Fluorescent Coating Systems
Steel tubes and fittings for steel tubes
Published standards of relevance to the oil & gas industry:
EN 10288 Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatingsEN 10289 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatingsEN 10290 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatingsEN 10298 Steel tubes and fittings for on shore and offshore pipelines - Internal lining with cement mortarEN 10300 Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coatingEN 10301 Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gasEN 10310 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatingsEN 10329 Steel tubes and fittings for onshore and offshore pipelines - External field joint coatingsEN 10339 Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection
The following three standards emanating from the ISO/TC67 work are on the ECISS/TC29 programme for adoption:
prEN ISO 21809-1 Petroleum and natural gas industries - External coatings for buried or sub- merged pipelines used in pipeline transportation systems - Part 1: Polyole- fin coatings (3-layer PE and 3-layer PP) (ISO/DIS 21809-1)prEN ISO 21809-3 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatingsprEN ISO 21809-5 Petroleum and natural gas industries - External coatings for buried or sub- merged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO/DIS 21809-5)
The structure of ECISS/TC29 includes the following of interest:
ECISS/TC 29/SC 4 Coatings for steel tubesECISS/TC 29/SC 4/WG 15 Internal liquid epoxy lining
|