마젤란 빈티지 포인트(VP) 프로그램이 작동이 안되네요?

[세옹지마]

잘 작동이 되었는데 한동안 VP를 안쓰다가 오늘 접속을 해보니 아래와 같은 내용이 뜨면서 프로그램이 동작을 안하네요?

Unable to creat DirextX device. VantagePoint will be closed.

혹시 이런 내용을 올바르게 작동할수 있도록 하는 방법을 아시는 분들을 도움을 부탁드리옵니다. 혹시 프로그램에 버그가 있지 않나 해서 모두 지우고 다시 깔았는데도 똑같은 증상이 나타나네요?

<인터넷에서 복원방법을 찾아보았습니다.>  그런데 내용을 이해 못하겠습니다. 아시는 분들은 덧글좀 부탁드리옵니다. 부탁드리옵니다.

방법 1

http://70.40.222.100/forum/viewtopic.php?f=8&t=2385&start=0
I haven't used Vantagepoint in several weeks I just haven't uploaded any new caches in my GPS in that time. Today I created a query and tried to open it with VantagePoint Software and VantagePoint complains:

GPS에 그 어떤 새로운 적용(업데이트)도 안했는데, 몇주전부터 빈티지플그램을 사용할수 없습니다.  아래와 같은 증상이 나타나는데, 이 내용을 아시는 분은 질문에 답변부탁드립니다.

Error (에러증상)
Unable to create DirectX devince. VantagePoint will be closed.

How do I fix this problem and please responde in as much detail as possible  assume I know nothing.

아무것도 보른다고 생각하시고 가급적 상세하에 문제를 해결할수 있는 방법을 알려주세요?

I have removed VantagePoint and reinstalled it with no luck but, and have downloaded directX 9c from microsoft and it installed with no problems that's all I've tried.

빈티지 프로그램을 제거한후 다시 깔았지만, 전혀 동작이 안되며, 그래서 마이크로 소프트 사로부터  디렉트.X 9C를 다운받았습니다.  문제없이 인스톨 되었읍니다.

방법 2

http://cafe.daum.net/gpsyn/Pllg/246

디스플레이 속성에서 하드웨어 가속이 최대로 설정

http://70.40.222.100/forum/viewtopic.php?f=8&t=2385&start=0 

I saw the same message when hardware acceleration for my video card was turned off. Check these settings: Display -> Properties -> Settings -> Advanced -> Diagnostics -> Hardware Acceleration.

비디오 카드의 하드웨어 가속이  턴오프 되어있을경우 동일한 증상이 나타나는 것을 보았다.  다으의 셋팅을 체크해봐라. 

Display -> Properties -> Settings -> Advanced -> Diagnostics -> Hardware Acceleration.

디스플레이->속성->셋팅->어드밴스->다이고노시스(진단)->하드웨어 가속

------------------------------------------------------------------------------------------------------------------------

http://disneyinteractivestudios.custhelp.com/app/answers/detail/a_id/1368/~/-who-wants-to-be-a-millionaire-2nd-edition-error%3A-%22-unable-to-use-directdraw

This error message indicates that the program is having difficulty addressing the DirectDraw functionality of your video card. To correct this issue, please perform the following procedures.

1. Lower the Hardware Acceleration
2. Ensure that the Video driver is DirectX Certified
3. Disable DirectDraw Acceleration
4. Update the Video Card Drivers

1. Lower the Hardware Acceleration

To adjust the Hardware Acceleration setting, proceed as follows:

Windows 98/Me

1. Fromt he Windows Desktop, right-click on the My Computer icon. Select Properties from the resulting option menu.
2. Within the System Properties window, click on the Performance tab to bring it forward.
3. Near the bottom of the Performance tab is a section titled Advanced settings. In this section, click on the Graphics... button to open the Advanced Graphics Settings window.
4. The Advanced Graphics Settings window contains a slider for Hardware acceleration, which has four settings - None (full Left), Basic (second to the Left), Most (second to the Right) and Full (full right). This slider is set to Full by default. Click on this slider and drag it one notch to the left, setting the acceleration to Most. Below the slider are the words Most accelerator functions: followed by a descriptive paragraph regarding that setting.

   NOTE: Lowering the hardware acceleration more than necessary may negatively affect program performance. For the best results, lower the Hardware Acceleration only one notch at a time, then test to see if the issue has been resolved. Do not drag the Hardware Acceleration slider more than one setting to the left without first testing to see if the issue has been resolved. Disney Interactive Studios Guest Support does not recommend that you drag the "hardware acceleration" slider all the way to the left to "None". This may cause the system to lockup or cause a system conflict with the video card.

5. Click on OK to confirm‎ this selection and return to the Performance tab. From the bottom of the performance tab, click on Close to close the System Properties window.
6. A dialog box appears with the option to restart your computer. Click on Yes to restart so that the changes will take effect.
7. When Windows restarts, try the program again. If the technical issue is resolved, your system has been configured properly. If the issue recurs, repeat this procedure, setting the Hardware acceleration one step lower, and then run the program again. If necessary, try all settings, one at a time, until the issue is resolved.

   If the issue is resolved by lowering the hardware acceleration, you may want to consider obtaining an updated video driver which will allow the system to function properly with the hardware acceleration set to Full.

   To obtain an updated video driver, click here 

   NOTE: If the issue cannot be resolved by changing the Hardware Acceleration setting, restore the original setting and continue with an alternate solution.

Windows XP

1. From the Windows Taskbar, click on Start and from the Start Menu select Control Panel
2. In the Control Panel window, the default view is "Category View." From this view, click on Appearance and Themes and select Display from the resulting screen. Within "Classic View", double-click on the Display icon.
3. In the Display Properties window, click on the Settings tab and select the Advanced button in the bottom right corner.
4. From the Advanced Properties window, click on the Troubleshooting tab.
5. The Advanced Graphics Settings window contains a slider for Hardware acceleration, which has four settings - None (full Left), Basic (second to the Left), Most (second to the Right) and Full (full right). This slider is set to Full by default. Click on this slider and drag it one notch to the left, setting the acceleration to Most. Below the slider are the words Most accelerator functions: followed by a descriptive paragraph regarding that setting.

   NOTE: Lowering the hardware acceleration more than necessary may negatively affect program performance. For the best results, lower the Hardware Acceleration only one notch at a time, then test to see if the issue has been resolved. Do not drag the Hardware Acceleration slider more than one setting to the left without first testing to see if the issue has been resolved. Disney Interactive Studios Guest Support does not recommend that you drag the "hardware acceleration" slider all the way to the left to "None". This may cause the system to lockup or cause a system conflict with the video card.

6. Click on OK to confirm‎ this selection and return to the Performance tab. From the bottom of the performance tab, click on Close to close the System Properties window.
7. A dialog box appears with the option to restart your computer. Click on Yes to restart so that the changes will take effect.
8. When Windows restarts, try the program again. If the technical issue is resolved, your system has been configured properly. If the issue recurs, repeat this procedure, setting the Hardware acceleration one step lower, and then run the program again. If necessary, try all settings, one at a time, until the issue is resolved.

   If the issue is resolved by lowering the hardware acceleration, you may want to consider obtaining an updated video driver which will allow the system to function properly with the hardware acceleration set to Full.

   To obtain an updated video driver, click here 

   NOTE: If the issue cannot be resolved by changing the Hardware Acceleration setting, restore the original setting and continue with an alternate solution.

2. Ensure that the Video driver is DirectX Certified

You may check the status of your video card with relation to DirectX, by viewing its settings in the Display tab of the DirectX Diagnostics Tool. Please click here for instructions on using the DirectX Diagnostics Tool (DXDIAG).

• If it should prove that your video card is certified for DirectX, please proceed to Step 3.
• If your video card is not using DirectX certified drivers, they may need to be updated. Proceed to Step 4 for instruction on updating your video card drivers.

3. Disable Direct Draw Acceleration

• From within the Display tab of the DirectX Diagnostics Tool program, click on the Disable button next to the DirectDraw acceleration option.
• Select Exit.
• Run the program again. If this issue is not resolved, you may need to update your video card drivers. Proceed to Step 4 for further instructions.

4. Update the Video Card Drivers

• Computer system and component manufacturers are constantly updating their drivers so that their hardware can play the latest software programs with the best possible performance. If you determine that your system is not using the latest driver, or your current driver is dated earlier than one year prior to today's date, you should consider obtaining an updated driver. Even systems right out of the box sometimes need driver updates as older drivers may have been installed for testing purposes.
  If your video card, sound card, and CD-ROM drive were included with your system at the time of purchase, contact the manufacturer of your computer system about obtaining the latest version of a driver. If you have purchased a system component separately from your computer system, contact the component manufacturer to obtain the latest version of the driver.
  Refer to your hardware documentation for contact information. Please be aware that charges may be incurred when calling them by telephone, that is why we always advise downloading the drivers for free from the manufacturer's website.

-------------------------------------------------------------------------------------------------------

ATI Radeon Xpress 1250 드라이버 최신 업데이트 어디서 ?내공 30

http://kin.naver.com/qna/detail.nhn?d1id=1&dirId=1010306&docId=72668494&qb=YXRpIHJhZGVvbiB4cHJlc3MgMTI1MA==&enc=utf8&section=kin&rank=2&search_sort=0&spq=0&pid=gRIMGloi5TCssbOqDL0sss--317406&sid=TU6O4jdjTk0AAGdqbNo

그래픽 드라이버 찾기

http://support.amd.com/us/gpudownload/Pages/index.aspx

ATI 드라이버 재설정에 관한 사항
http://support.amd.com/us/kbarticles/Pages/GPU-2-ATICatalystSuiteDriverXP.aspx
 

[세옹지마]

이곳( http://cafe.daum.net/gpsyn/Pllg/246 )에도 같은 내용이 올라왔는데 무슨 내용인지 모르겠군요?

[세옹지마]

해결방법이-> 디스플레이 속성에서 하드웨어 가속이 최대로 설정되어 있지 않아서 그랬었나 봅니다. 그걸로 바꾸니까 잘 되네요..

라고 하는데 이내용이 무엇을 뜻하는질 모르겠씁니다.

[세옹지마]

가속을 최대로 했는데에도 안되는군요? 아마도 빈티지 프로그램이 3D로 리바이스 되면서 컴의 그래픽카드와 충돌이 나는것 같은 생각이 드는군요?

[하늘소]

제어판에 장치관리자 리스트에 혹 노란색 혹은 물음표 있나요 충돌나는 것으로 보여집니다 directx VGA 문제입니다 좋은 결과 바랍니다

[세옹지마]

노란색 안나와 있습니다. 무슨 문제인지 모르겠습니다... 아마도 쉽게 해결될수 있는 문제가 아닌듯 하네요?

[세옹지마]

우리아이들이 동영상 인코더를 갈았는데 이것때문인지,, 아니면 제가 OrCAD를 깐것이 문제인지 모르겠습니다. 추축건테,, 분명한것은 비데오와 관련된 Direct X 문제인듯 합니다만,, 모조리 깔아 보았는데도 아무런 해결이 되지 않네요?

[하늘소]

게임과 충돌나는 것이군요... Direct8이 더 안정적입니다. 아무래도 기존것을 모두 지우시고..
VP도 안정적인 모두 삭제하신 후에 1.8을 설치한 후에 업데이트를 하심이.... 좋을 것 같아요..
명절이라 아이들이 이것 저것 설치하다 사고나죠 ...

[어울림]

시작→프로그램→보조프로그램→시스템→시스템정보로 들어가면 시스템정보창이 열립니다.
시스템정보창에서 도구메뉴로 들어가면 다이렉트엑스진단도구 창이 열립니다.
여기에서 xp의 경우 다이렉트엑스 버젼이 9.0c면 정상적인 버전입니다.
그리고 다이렉트엑스창에서 '디스플레이'를 클릭하여 다이렉트엑스가 정상적으로 작동하는지 테스트 할 수 있습니다.
다이렉트엑스가 정상적으로 작동한다면 그래픽카드 드라이버가 손상된 것으로 보입니다.
그래픽카드 드라이버를 삭제 후 다시 깔아보시는 것이 좋을 듯 합니다.

[세옹지마]

이것도 해보았습니다만,, 아무런 이상이 없다고 하네요? 감사합니다.

[산하]

vp가 이해할 수 없는 오류가 발생하는 경우가 종종 있는 것 같습니다. 저역시 최근에 다른문제로 인터넷에 나온 방법을 해봤는데 정작 알고보니 문제는 다른 이유 때문이었습니다. 뾰족한 해결책은 아닙니다만,,, 윈도우에서 사용자를 새로 만들거나(id는 영어로...) vista나 7이시면 administrator로 로그인해서 한번 해보시기 바랍니다.

[세옹지마]

좋은 정보 감사합니다. 한번 해보아야 겠군요?

[세옹지마]

도저히 안돼서 윈도우즈를 다시 깔았습니다.. 그랬더니 되는군요?