253. 필렛용접의 각 장은 판두께의 몇 %인가?plate thickness of the fillet weld leg length of a few percent? : 70%
254. 판 두께가 20mm일 때, 각 장과 목두께의 치수는? : 각장 20×0.707=14.14, 목두께 14.14×0.707=9.996(10)
255. 냉각속도를 비교하시오. Compare the cooling rate ( “>” 또는 “<” 기호로 표시하시오.)
맞대기용접actual throat of butt weld ( ≪ ) 필렛용접fillet weld,구리․알루미늄 ( ≫ ) 철강, 박판 ( ≪ ) 후판athinplate+heavy plate
256. 용접부의 분류 3가지를 쓰고 가장 취약한 부분은?.
용착금속부deposit zone, 열영향부(변질부)heat-affected zone, 모재부(원질부)base metal 가장취약한부분:열영향부(변질부)
257. 기계적 시험법의 종류 중 정적시험법의 종류 4가지는? : 인장시험, 굽힘시험, 경도시험, 크리이프시험,
Kind of static test method 4 with of the type of mechanical test?peel (strength) test,flexuraltest,hardness test,Creep test
258. 화학적 시험의 종류 3가지는?three kinds of chemical examination? : 화학분석, 부식, 수소시험
chemical analysis ,corrosion,hydrogen test
259. 금속학적 시험의 종류 3가지는? : 현미경조직시험, ,, 파면시험,육안조직시험
three kinds of metallurgical test?; microstructure observation test, fracture test ,macrostructure test,
260. 시험편에 V형이나 U형의 노치를 주고 충격적인 하중으로 검사하는 시험법은? : 충격시험impulse test
Test methods to examine the shocking load Of V-shaped or U-shaped notch in the specimen ?